Search Results

The document provides a definition of skew and disconnect occuring in high lift systems in flight controls including their hazard assessment, describes generic solutions and provides a for specifying requirements.

Scope: This Aerospace Recommended Practice (ARP) provides guidelines for specifying dielectric withstanding strength and insulation resistance design and test requirements for aircraft line replaceable units (LRU's) used within a flight control and/or a utility system. 1.1 Purpose The testing is intended to verify that an LRU can operate safely at its rated voltage and withstand momentary over potentials due to switching, troubleshooting testing, surges, etc.. The testing is also intended to verify adequate design margin of the insulation system and detect workmanship problems.

This specification presents the standard method for the proof testing and prestretching of aircraft cable assemblies.

General terms peculiar to aerospace fluid power and control systems are defined in this glossary. Relevant terms have been excerpted from the referenced documents and included herein from the aerospace terms felt to be most useful to the ISO. This is a systems document and the only component-related terms are those significant at the systems level.

This SAE Aerospace Information Report (AIR) presents a review of the types and general characteristics of power sources that may be used to provide the power for gaseous or liquid fluidic control systems. Fluidic definitions, terminology, units and symbols are defined in Reference 2.1.1.

This SAE Aerospace Information Report (AIR) presents a review of the types and general characteristics of power sources that may be used to provide the power for gaseous or liquid fluidic control systems. Fluidic definitions, terminology, units and symbols are defined in Reference 2.1.1.

This SAE Aerospace Information Report (AIR) outlines comprehensive aircraft flight control system fault isolation methodology that has proven to be effective. The methodology presented in this Information Report has been used in several successful fault isolation efforts on military aircraft.

This SAE Aerospace Information Report (AIR) outlines comprehensive aircraft flight control system fault isolation methodology that has proven to be effective. The methodology presented in this Information Report has been used in several successful fault isolation efforts on military aircraft.

This Aerospace Information Report (AIR) provides information on systems integration rigs, commonly referred to as “Iron Birds” for aerospace applications. a It includes background historical information including descriptions of Iron Birds produced to date, important component elements and selection rationale, hydraulic system design and operational modes and illustrates the design approaches to be considered. b It provides illustrations of the various systems that should be considered for Iron Bird testing in the development phase and utilization during the production program. c It includes recommendations for simulation, component development tests, system integration and lessons learned.

This Aerospace Recommended Practice (ARP) provides general requirements for a generic, integrated rudder and brake pedal unit, incorporating a passive force-feel system that could be used for fixed-wing fly-by wire transport and business aircraft.This ARP addresses the following:- The functions to be implemented- The mechanical interconnection between captain and F/O station- The geometric and mechanical characteristics- The mechanical, electrical, and electronic interfaces- The safety and certification requirements

This Aerospace Recommended Practice (ARP) provides general requirements for a generic, integrated rudder and brake pedal unit, incorporating a passive force-feel system that could be used for fixed-wing fly-by wire transport and business aircraft. This ARP addresses the following: The functions to be implemented The mechanical interconnection between captain and F/O station The geometric and mechanical characteristics The mechanical, electrical, and electronic interfaces The safety and certification requirements

This document establishes recommended practices for the specification of general performance, design, test, development, and quality assurance requirements for the flight control related functions of the Vehicle Management Systems (VMS) of military Unmanned Aircraft (UA), the airborne element of Unmanned Aircraft Systems (UAS), as defined by ASTM F 2395-07. The document is written for military unmanned aircraft intended for use primarily in military operational areas. The document also provides a foundation for considerations applicable to safe flight in all classes of airspace.

This document establishes recommended practices for the specification of general performance, design, test, development, and quality assurance requirements for the flight control related functions of the Vehicle Management Systems (VMS) of military Unmanned Aircraft (UA), the airborne element of Unmanned Aircraft Systems (UAS), as defined by ASTM F 2395-07. The document is written for military unmanned aircraft intended for use primarily in military operational areas. The document also provides a foundation for considerations applicable to safe flight in all classes of airspace.

The purpose of this document is to develop the general characteristics and requirements for feel-force control systems for active cockpit controllers, also known as Active Inceptors. The document presents technical material that describes the recommended key characteristics and design considerations for these types of systems. Where appropriate, the effects of platform specific requirements (e.g., single axis/dual axis, single seat/dual seat, civil/military, rotorcraft/fixed wing aircraft, etc.) are clearly identified. The material developed will serve as a reference guide for: a Aircraft prime contractors who want to understand active cockpit controller technology and develop their own set of requirements; b Suppliers that develop active cockpit controller equipment and; c Regulatory Authorities who will be involved in the certification of these types of systems.

This SAE Aerospace Information Report (AIR) provides descriptions of aircraft flight control actuation system failure-detection methods. The fault-detection methods are those used for ground and in-flight detection of failures in electrohydraulic actuation systems for primary flight controls.

This SAE Aerospace Information Report (AIR) supplies information on the flight control systems incorporated on various current and historic fixed wing, rotary wing, and tilt rotor aircraft. A brief description of the aircraft is followed by a description of the flight control system, some specific components, drawings of the internal arrangement, block diagrams, and schematics. System operation redundancy management is also presented.

This SAE Aerospace Information Report (AIR) supplies information on the flight control systems incorporated on various current and historic fixed wing, rotary wing, and tilt rotor aircraft. A brief description of the aircraft is followed by a description of the flight control system, some specific components, drawings of the internal arrangement, block diagrams, and schematics. System operation redundancy management is also presented.

This Aerospace Information Report (AIR) supplies information on the flight control systems incorporated on various aircraft. A brief description of the aircraft is followed by a description of the flight control system, some specific components, drawings of the internal arrangement, block diagrams, and schematics. System operation redundancy management is also presented.

The scope of this SAE Aerospace Recommended Practice (ARP) covers acquisition of flight test data for use in developing a statistical data base of aerospace vehicle flight control surface actuator duty cycle. The statistical data base is intended for use in establishing industry guidelines and procurement specification requirements for actuator displacement duty cycle. The objective of this ARP is to provide a uniform method for the aerospace industry to collect flight control displacement type duty cycle data during demonstration and full scale development of new aircraft or during development testing of new models of existing aircraft.

This SAE Aerospace Recommended Practice (ARP) provides guidelines for the configuration and design of mechanical control signal transmission systems and subsystems. It is focused on the recommended practices for designing cable and pulley, pushrod and bellcrank and push-pull flexible cable control systems. These systems are typically used in some combination to transmit pilot commands into primary, secondary and utility control system commands (mechanical or electrical) or aircraft surface commands. On mechanically controlled aircraft, most pilot control commands are initiated through cockpit mounted wheels, sticks, levers, pedals or cranks that are coupled by pushrods or links to cable systems. The cable systems are routed throughout the aircraft and terminated in close proximity to the commanded surface or function where cranks and pushrods are again used to control the commanded function.