Search Results

Standard

AS81936/3 Bearing, Plain, Self Aligning, Cu-Ni-Sn Ball, CRES Race (With Grooved Race) -65F to +350F

2014-09-30

WIP

AS81936/3

This SAE Aerospace Standard will cover airframe plain spherical bearings ustilizing a Copper Nickel Tin ball and a Corrosion Resistant Steel outer race for use between -65F and+350F.

Standard

Bearing, Plain, Self Aligning, Cu-Ni-Sn Ball, CRES Race (Chamfered Race) -65F to +350F

2014-09-30

WIP

AS81936/4

This SAE Aerospace Standard will cover airframe plain spherical bearings ustilizing a Copper Nickel Tin ball and a Corrosion Resistant Steel outer race for use between -65F and+350F.

Standard

BEARINGS, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,GENERAL SPECIFICATION FOR (-65 to +250°F)

2012-04-20

WIP

AS8948

inital release.

Standard

ARP5448/10 Plain Bearing, Rod End, Axial Static Proof Load Test Methods

2018-10-09

WIP

ARP5448/10

Define the test methods for performing the axial static proof load test as required in Aerospace Standard AS81935.

Standard

BEARING, PLAIN ROD END, SELF-ALIGNING,SELF-LUBRICATING, WIDE, INTERNALLY THREADED, -65 TO +250 °F

2012-04-20

WIP

AS21243

initial release

Standard

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING,WIDE, EXTERNALLY THREADED,-65 TO +250F

2012-04-20

WIP

AS21242

initial release

Standard

Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race) General Specification For

2006-06-19

CURRENT

AS81936A

This SAE Aerospace Standard (AS) covers airframe plain spherical bearings utilizing a copper-beryllium ball and corrosion resistant steel outer race for use between −65 °F and +350 °F.

Standard

Bearing, Sleeve, Flanged, Self-Lubricating -65 to +250 °F

2017-04-18

WIP

AS21241A

Scope unavailable.

Standard

Bearings, Plain, Self-Lubricating, Self- Aligning, High Speed Oscillation -65 to +160 °F

2015-10-27

WIP

AS81819/1B

No scope available.

Standard

Rod End Locking Device Selection Criteria

2020-07-01

CURRENT

ARP6910

This ARP discusses common rod end locking devices with recommended applications and some of the advantages and disadvantages of specific configurations. An appendix is included with factors to be considered for selection of positive locking devices and a discussion of safetying devices for rod end assemblies.

Standard

Bearing, Sleeve, Plain, Self-Lubricating -65 to 250 °F

2017-04-18

WIP

AS21240A

Scope unavailable.

Standard

Plain Bearing High Speed Oscillation Test

2022-09-27

WIP

ARP5448/2A

This test method outlines a standard procedure for performing cyclic reversing load testing on oscillating sliding bearings. The wear data from these tests is to be used for qualification requirements and to establish bearing design criteria.

Standard

Plain Spherical Bearing Conformity Examination

2023-03-13

WIP

ARP5448/6B

This method outlines a standard procedure for performing conformity tests of bearings utilizing liners of bonded polytetrafluoroethylene (PTFE). The data from these tests shall be used to determine if the product meets the conformity requirements of the applicable specification.

Standard

Plain Bearing Wear Measurement

2023-03-13

WIP

ARP5448/7B

This standard details two methods of inspecting PTFE lined spherical or journal bearing wear outside the test apparatus. The methods described herein are applicable only to bearings which were unidirectionally loaded and the area of sliding wear is known and held constant throughout the dynamic test. The two methods described are: a. Destructive Inspection - Cut and measure (not applicable to molded liners) b. Nondestructive Inspection - Radial play (gauge) measurement

Standard

Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners

2018-08-13

CURRENT

ARP5448/4

This test method outlines a recommended procedure for performing bond integrity tests of bonded peelable woven fabric reinforced polytetrafluoroethylene (PTFE) liners, hereafter referred to within this document as "PTFE liner" or "liner". The data from these tests shall be used to determine if the product meets the "bond integrity" requirements of the applicable specifications.

Standard

BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW, EXTERNALLY THREADED, -65 TO +325 °F

2017-10-01

WIP

AS81935/4C

Scope is unavailable.

Standard

BUSHING, SLEEVE, PLAIN INNER BORE LINER

2021-09-21

CURRENT

AS6072A

Standard

Bearings, Sleeve, Plain and Flanged, Self-Lubricating -65 to +250 °F

2017-04-04

WIP

AS8943A

This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in a temperature range of -65 to +250 ˚F (-54 to +121 °C).

Standard

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F

2018-06-27

WIP

AS14103G

SCOPE IS UNAVAILABLE.

Standard

LOCK, ROD END, IMPROVED STRENGTH, NAS LUG

2017-06-05

HISTORICAL

AS14227D