Refine Your Search

Topic

Search Results

Standard

Electron-Beam Welding for Fatigue Critical Applications

2016-10-16
WIP
B16AD
AMS specification that defaults to an appropriate AWS specification for the technical requirements but has the QA requirements from AMS2680. AMS2680 would then be stabilized and point to the new AMS. This specification should be titled B16AD for balloting purposes.
Standard

High density ceramic media

2017-06-13
WIP
B17AD
Specification to cover the technical requirements for a high density ceramic peening media.
Standard

Forging Process and Qualification

2017-10-24
WIP
B17AE
This specification covers requirements for processes and equipment used in the fabrication of forged products that are considered by the supplier and customer to be aerospace grade, have customer part number(s), and are made by any of the following forging processes and equipment.
Standard

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa

2015-04-27
HISTORICAL
AMS03_4
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard

Protection of Aluminum Alloys by Sprayed Metal Coatings

2017-03-21
CURRENT
AMS03_3A
This SAE Standard specifies the requirements for the application of sprayed metal coatings of aluminum, zinc, or aluminum-zinc based alloys for the protection of aluminum alloys against corrosion. It does not cover the metal spraying of aluminumarmour materials, which should be treated in accordance with the requirements of Def Stan 08-39.
Standard

The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa

2017-03-21
CURRENT
AMS03_4A
This SAE Standard specifies the special treatments and precautions that are to be observed when protective and other surface treatments are applied to items, including springs, made from steel of specified maximum tensile strength exceeding 1450 MPa. The requirements of this Standard qualify those in process specifications and override the latter where there is conflict. The Standard also gives advice on design, manufacture, and preparation of items prior to cleaning and protection.
Standard

Protection of Aluminum Alloys by Sprayed Metal Coatings

2015-04-27
HISTORICAL
AMS03_3
This SAE Standard specifies the requirements for the application of sprayed metal coatings of aluminum, zinc, or aluminum-zinc based alloys for the protection of aluminum alloys against corrosion. It does not cover the metal spraying of aluminumarmour materials, which should be treated in accordance with the requirements of Def Stan 08-39.
Standard

Electro-Deposition of Silver

2015-04-28
HISTORICAL
AMS03_9
This SAE Standard specifies the requirements for the electro-deposition of silver on ferrous-base, copper-base, aluminum-base, zinc-base and nickel base materials. It is primarily intended for use on electrical and electronic items which are to be plated with silver to increase the electrical conductivity of the surface.
Standard

Electro-Deposition of Silver

2017-10-04
CURRENT
AMS03_9A
This SAE Standard specifies the requirements for the electro-deposition of silver on ferrous-base, copper-base, aluminum-base, zinc-base and nickel base materials. It is primarily intended for use on electrical and electronic items which are to be plated with silver to increase the electrical conductivity of the surface.
Standard

Brazing, Silver For Use Up to 400 °F (204 °C)

2003-01-07
HISTORICAL
AMS2665G
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints.
Standard

Brazing, Silver For Use Up to 400 °F (204 °C)

2013-05-29
CURRENT
AMS2665H
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints.
Standard

Silver Brazing High Temperature

1965-02-01
HISTORICAL
AMS2666A
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 2664, SILVER BRAZING, For Use Up to 800F degrees (425C degrees). The requirements of the latest issue of AMS 2664 shall be fulfilled whenever reference is made to this specification (AMS 2666).
Standard

Brazing, Silver For Use Up to 400°F (204°C)

1983-10-01
HISTORICAL
AMS2665D
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints. This procedure has been used typically for joints requiring high strength up to 400 degrees F (204 degrees C), but usage is not limited to such applications.
Standard

Silver Brazing High Temperature

1950-06-01
HISTORICAL
AMS2666
SUPERSEDING SPECIFICATION: The requirements of this specification are embodied in the latest issue of AMS 2664, SILVER BRAZING, For Use Up to 800F degrees (425C degrees). The requirements of the latest issue of AMS 2664 shall be fulfilled whenever reference is made to this specification (AMS 2666).
Standard

Brazing, Silver For Use Up to 400°F (204°C)

1967-11-01
HISTORICAL
AMS2665B
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints. This procedure has been used typically for joints requiring high strength up to 400 degrees F (204 degrees C), but usage is not limited to such applications.
Standard

BRAZING, SILVER FOR USE UP TO 400 °F (204 °C)

1996-02-01
HISTORICAL
AMS2665F
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints.
Standard

Brazing, Silver For Use Up to 400°F (204°C)

1991-10-01
HISTORICAL
AMS2665E
This specification covers the engineering requirements for producing brazed joints in parts fabricated from steels, iron alloys, nickel alloys, cobalt alloys, and copper alloys by use of silver alloys, and the properties of such joints. This procedure has been used typically for joints requiring high strength up to 400 degrees F (204 degrees C), but usage is not limited to such applications.
X