Search Results

It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.

It is recognized that the structural integrity of repaired composite structures depends upon the capabilities of the individuals who are responsible for performing the repairs. This document is intended to address repairs of composite structure regardless of the type of structure such as marine, wind turbine, automotive, aircraft, or other applications. This certification standard establishes the minimum requirements for training, examining, and certifying composite structure repair personnel. It establishes criteria for the certification of personnel requiring appropriate knowledge of the technical principles underlying the composite structural repairs they perform. Persons certified under this document may be eligible for licensing or certification/ qualification by an appropriate authority, in addition to this industry accepted basic composite repair technician certification.

AMS 3970/4 specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable when the film adhesive is part of the prepreg system as defined in AMS 3970 and AMS 3970/1.

AMS3970/4 specifies the batch release and delivery requirements for film adhesive used for repair. This specification is applicable only when the film adhesive is used as part of the prepreg system as defined in AMS3970 and AMS3970/1.

The PS, AMS3970/3, specifies the batch release and delivery requirements for carbon fiber fabric epoxy prepreg used for repair.

AMS 3970/3 specifies the batch release and delivery requirements for carbon fiber fabric epoxy prepreg used for repair.

This document provides recommendations concerning the minimum knowledge and analytical skill guidelines for a composite and metal bond repair design engineer. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to design appropriate repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.

This document provides recommendations concerning the minimum knowledge and skill guidelines for a composite and metal bond repair inspector. Teaching levels have been assigned to this curriculum to define the knowledge, skills and abilities needed to inspect repairs. Minimum hours of instruction have been provided to ensure adequate lecture and laboratory coverage of all subject matter. These minimums may be exceeded, and may include an increase in the total number of training hours and/or increases in the teaching levels.

This SAE Aerospace Recommended Practice (ARP) describes standard methods for drying commercial aircraft composite structures prior to repair and gives general guidelines on use and applicability. It addresses the removal of liquids that have collected inside the structures through open damage, microcracks, or porosity and the removal of absorbed moisture from the composite material. The methods described in this document shall only be used when specified in an approved repair document or with the agreement of the original equipment manufacturer (OEM) or regulatory authority. If this document is used for the drying of materials other than thermosetting composite materials, the fitness for this purpose must be determined by the user. The purpose of this document is to provide a set of standard drying methods that may be referenced in repair documents produced by airlines or airframe and engine manufacturers.

The PS, AMS3970/5, specifies the batch release and delivery requirements for the companion non-structural glass fiber fabric prepreg.

This PS specifies the batch release and delivery requirements for epoxy resin systems (base resin and curing agent) used for wet lay-up repair purposes.

This PS, AMS2980/3, specifies the batch release and delivery requirements for carbon fiber and carbon fabric used for wet lay-up repair purposes.

This PS specifies the batch release and delivery requirements for epoxy resin systems (base resin and curing agent) used for wet lay-up repair purposes.

This PS, AMS2980/4, specifies the batch release and delivery requirements for epoxy resin systems (base resin and curing agent) used for wet lay-up repair purposes.

This PS specifies the batch release and delivery requirements for carbon fiber and carbon fabric used for wet lay-up repair purposes.

This PS specifies the batch release and delivery requirements for carbon fiber and carbon fabric used for wet lay-up repair purposes.

This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to material qualification and qualified products is presented.

This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to material qualification and qualified products is presented.

AMS 3970 gives information about qualification rules and the relation between the different specification parts involved, such as the Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to the material qualification and qualified products is presented.