Refine Your Search

Topic

Search Results

Standard

Dynamic Seal Test Fixture

2020-02-03
WIP
AS6944
This SAE Aerospace Standard (AS) provides dimensions and procedures for a standardized test fixture used to evaluate the dynamic performance of O-ring materials in glands per AS4617.
Standard

Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -50 °F (-46 °C) For Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems

2019-05-21
WIP
AMS7410
1.1 Form This specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to be used in the form of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. 1.2 Application These products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels, and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. This fluorocarbon (FKM) has a service temperature range of -65 to +400 °F (-54 to +204 °C) in air. 1.3 Safety - Hazardous Materials While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards, which may be involved in such use.
Standard

Identification and Packaging, Elastomeric Products

1960-01-01
HISTORICAL
AMS2810C
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Identification and Packaging, Elastomeric Products

1975-06-01
HISTORICAL
AMS2810D
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Identification and Packaging, Elastomeric Products

1946-06-01
HISTORICAL
AMS2810A
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Identification and Packaging, Elastomeric Products

1952-06-01
HISTORICAL
AMS2810B
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Identification and Packaging Elastomeric Products

1988-04-01
HISTORICAL
AMS2810F
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS 2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Identification and Packaging Elastomeric Products

2008-12-30
HISTORICAL
AMS2810G
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Identification and Packaging Elastomeric Products

2018-01-02
CURRENT
AMS2810H
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

IDENTIFICATION AND PACKAGING Elastomeric Products

1982-10-01
HISTORICAL
AMS2810E
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS 2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Identification and Packaging, Elastomeric Products

1944-11-01
HISTORICAL
AMS2810
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
Standard

Packaging and Identification of Molded Elastomeric Seals and Sealing Components

2016-11-22
CURRENT
AMS2817G
This specification covers procedures which will provide protection of elastomeric seals and seal assemblies such as O-rings, cap seal assemblies, and other designs from contamination by foreign materials and handling / transportation / storage damage prior to installation and ensure positive identification by part number of each piece until it is installed.
Standard

Packaging and Identification Preformed Packings

1999-01-01
HISTORICAL
AMS2817E
This specification covers procedures which will provide protection of preformed packings, primarily “O” rings of elastomeric materials, from contamination by foreign materials prior to installation and ensure positive identification by part number of each piece until it is installed.
Standard

Packaging and Identification Preformed Packings

2008-12-30
HISTORICAL
AMS2817F
This specification covers procedures which will provide protection of preformed packings, primarily “O” rings of elastomeric materials, from contamination by foreign materials prior to installation and ensure positive identification by part number of each piece until it is installed.
Standard

Packaging and Identification, Preformed Packings

1975-06-01
HISTORICAL
AMS2817B
This specification covers procedures which will provide protection of preformed packings, primarily "O " rings of elastomeric materials, from contamination by foreign materials prior to installation and ensure positive identification by part number of each piece until it is installed.
Standard

PACKAGING AND IDENTIFICATION Preformed Packings

1988-04-01
HISTORICAL
AMS2817D
This specification covers procedures which will provide protection of preformed packings, primarily "0" rings of elastomeric materials, from contamination by foreign materials prior to installation and ensure positive identification by part number of each piece until it is installed.
Standard

Packaging and Identification, Preformed Packings

1982-10-01
HISTORICAL
AMS2817C
This specification covers procedures which will provide protection of preformed packings, primarily "O " rings of elastomeric materials, from contamination by foreign materials prior to installation and ensure positive identification by part number of each piece until it is installed.
Standard

Packaging and Identification, Preformed Packings

1965-02-01
HISTORICAL
AMS2817A
This specification covers procedures which will provide protection of preformed packings, primarily "O " rings of elastomeric materials, from contamination by foreign materials prior to installation and ensure positive identification by part number of each piece until it is installed.
X