Standard
Gasket, Metallic-Encased
2007-06-08
AMSHHG101
This specification covers metallic-encased gaskets with and without inlays.
Search Results
Standard
Gasket, Metallic-Encased
2014-05-27
AMSHHG101A
This specification covers metallic-encased gaskets with and without inlays.
Standard
Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification for
1999-04-01
AMSR6855A
This specification covers the requirements for low temperature resistant sheets, strips, and molded or extruded shapes fabricated from synthetic rubber (see 6.1).
Standard
Insulation Blanket, Thermal-Acoustical
2011-09-23
AMSI7171A
This specification covers the requirements of composite blankets suitable for acoustical and thermal insulation of the walls of aircraft compartments within the temperature range of -65°F to +175°F (-54°C to +80°C).
Standard
Insulation Blanket, Thermal-Acoustical
1999-07-01
AMSI7171
This specification covers the requirements of composite blankets suitable for acoustical and thermal insulation of the walls of aircraft compartments within the temperature range of -65°F to +175°F (-54°C to +80°C).
Standard
Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant
2001-05-01
AMSR81828
This specification covers the requirements for ozone resistant chlorosulfonated polyethylene rubber in sheet form and as molded or extruded parts.
Standard
Rubber, Chlorosulfonated Polyethylene Elastomer, Sheet and Molded Shapes, Ozone Resistant
2011-09-23
AMSR81828A
This specification covers the requirements for ozone resistant chlorosulfonated polyethylene rubber in sheet form and as molded or extruded parts.
Standard
Test Slabs, High Strength, Fluorosilicone (FVMQ) 55 - 65
2014-09-05
AMS3217/7A
This specification covers a high strength fluorosilicone (FVMQ) rubber stock in the form of molded test slabs.
Standard
Rubber, Cellular, Chemically Blown
1998-07-01
AMSR6130
This specification establishes requirements for chemically blown cellular rubber.
Standard
Rubber, Ethylene-Propylene, Hydrazine Resistant
1999-07-01
AMSR83412
This specification covers three types of rubber having good resistance to high and low temperature and hydrazine type propellants, but poor resistance to hydrocarbon oils or solvents. Hydrazines are hazardous chemicals. See “Dangerous Properties of Industrial Materials” by N. Irving Sax.
Standard
Packing, Preformed, Petroleum Hydraulic Fluid Resistant Improved Performance at 275°F (135°C) Sizes and Tolerances
1999-06-01
AMSP83461/1
Standard
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant
1999-04-01
AMSR83248
This specification covers high temperature, compression set, and fluid resistant fluorocarbon elastomer sheets, strips, molded parts, and extruded shapes for aeronautical and aerospace applications.
Standard
Test Slabs, Fluoroelastomer (FKM) 65 - 75
2017-02-23
AMS3217/4C
This specification covers a standard fluoroelastomer (FKM) rubber stock in the form of molded test slabs.
Standard
Tolerances, Metric Rubber Products
2014-03-19
MAM2279B
This specification covers established metric (SI) manufacturing tolerances applicable to non-cellular rubber products ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive" applies only to the higher figure of the specified range.
Standard
Cork and Rubber Composition Sheet; for Aromatic Fuel and Oil Resistant Gaskets
2007-03-07
AMSC6183
This specification covers vulcanized sheet made of granulated cork uniformly dispersed in a synthetic rubber compound, for use in gaskets where aromatic fuel or oil resistance is required (see 6.1).
Standard
Rubber, Fabricated Products
2011-05-23
AMSR3065A
This specification establishes the requirements for fabricated products of vulcanized rubber, synthetic rubber or rubberlike compositions alone or in combination, together with procedures for the inspection of such products (see 6.1).
Standard
Rubber, Fabricated Products
2000-09-01
AMSR3065
This specification establishes the requirements for fabricated products of vulcanized rubber, synthetic rubber or rubber like compositions alone or in combination, together with procedures for the inspection of such products (see 6.1).
Standard
Oil, Reference, for “L” Stock Rubber Testing
2013-09-16
AMS3020A
This specification covers a petroleum-base reference oil (See 8.2).
Standard
Rubber, Synthetic, Solid, Sheet, Strip and Fabricated Parts, Synthetic Oil Resistant
2005-05-26
AMSR7362
This specification covers two types of synthetic rubber for use where resistance to diester synthetic oils is required.
Standard
Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
2013-09-16
AMS3217/1B
This specification covers a standard acrylonitrile butadiene (NBR-H) rubber stock with medium-high acrylonitrile content in the form of molded test slabs.
