Search Results

Standard

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

2013-09-26

HISTORICAL

AMS4128D

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50 mm) and over in nominal diameter or least difference between parallel sides.

Standard

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

2001-11-15

HISTORICAL

AMS4128C

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50 mm) and over in nominal diameter or least difference between parallel sides.

Standard

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

2021-06-28

CURRENT

AMS4128E

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).

Standard

ALUMINUM ALLOY BARS, ROLLED 4.5Cu - 1.5Mg - 0.6Mn (2024-T3510) Stress-Relief Stretched

1960-06-01

HISTORICAL

AMS4119

Standard

ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 4.5Cu - 1.5Mg - 0.6Mn (2024-T351) Stress-Relief Stretched

1965-02-01

HISTORICAL

AMS4119B

Standard

ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 4.5Cu - 1.5Mg - 0.60Mn (2024-T351) Stress-Relief Stretched

1966-09-01

HISTORICAL

AMS4119C

Standard

ALUMINUM ALLOY BARS, ROLLED 4.5Cu - 1.5Mg - 0.6Mn (2024-T351) Stress-Relief Stretched

1960-11-01

HISTORICAL

AMS4119A

Standard

Ingot, Zinc Alloy (For Sheet Metal Forming Dies)

1999-04-01

HISTORICAL

AMSI7068

This specification addresses requirements for a zinc alloy used in the production of sand cast forming dies for sheet metal stamping operations.

Standard

Ingot, Zinc Alloy (For Sheet Metal Forming Dies)

2007-09-13

HISTORICAL

AMSI7068A

This specification addresses requirements for a zinc alloy used in the production of sand cast forming dies for sheet metal stamping operations.

Standard

Ingot, Zinc Alloy (For Sheet Metal Forming Dies)

2011-10-24

HISTORICAL

AMSI7068B

This specification addresses requirements for a zinc alloy used in the production of sand cast forming dies for sheet metal stamping operations.

Standard

Ingot, Zinc Alloy (For Sheet Metal Forming Dies)

2012-08-24

CURRENT

AMSI7068C

This specification addresses requirements for a zinc alloy used in the production of sand cast forming dies for sheet metal stamping operations.

Standard

Aluminum Alloy Alclad 7178, Plate and Sheet

2012-09-28

HISTORICAL

AMSQQA250/15B

This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness bonded to both surfaces.

Standard

Aluminum Alloy Alclad 7178, Plate and Sheet

2014-02-14

CURRENT

AMSQQA250/15C

This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness bonded to both surfaces.

Standard

Aluminum Alloy 7178, Plate and Sheet

1997-08-01

HISTORICAL

AMSQQA250/14

This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.

Standard

Aluminum Alloy 7178, Plate and Sheet

2013-05-29

HISTORICAL

AMSQQA250/14A

This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.

Standard

Aluminum Alloy 7178, Plate and Sheet

2014-02-14

CURRENT

AMSQQA250/14B

This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.

Standard

Aluminum 7075, Plate and Sheet Alclad One Side

2012-09-28

HISTORICAL

AMSQQA250/18A

This specification covers the specific requirements for 7075 aluminum alloy alclad one side plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7075) core with a thin layer of an aluminum alloy (7072) anodic to the core bonded to one surface.

Standard

Aluminum Alloy, Alclad One Side 7075, Plate and Sheet

1997-08-01

HISTORICAL

AMSQQA250/18

This specification covers the specific requirements for 7075 aluminum alloy alclad one side plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7075) core with a thin layer of an aluminum alloy (7072) anodic to the core bonded to one surface.

Standard

Aluminum 7075, Plate and Sheet Alclad One Side

2014-03-06

CURRENT

AMSQQA250/18B

This specification covers the specific requirements for 7075 aluminum alloy alclad one side plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7075) core with a thin layer of an aluminum alloy (7072) anodic to the core bonded to one surface.

Standard

Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant

1998-09-01

HISTORICAL

AMSQQA250/21A

This specification covers the specific requirements for improved exfoliation-resistant aluminum alloy, 7178-T76 sheet and 7178-T7651 plate.