Refine Your Search

Topic

Search Results

Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

1991-10-01
HISTORICAL
MAM2303
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria.
Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

2007-07-19
CURRENT
MAM2303E
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria.
Standard

Aircraft Quality Steel Cleanliness, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

1993-07-01
HISTORICAL
MAM2303A
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable, corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Cleanliness, Aircraft Quality Steel, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

2000-10-01
HISTORICAL
MAM2303B
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable, corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (Si) Measurement

2003-03-12
HISTORICAL
MAM2303D
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria. AMS 2303 is the inch/pound version of this MAM. This procuedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (Si) Measurement

2001-10-01
HISTORICAL
MAM2303C
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria. AMS 2303 is the inch/pound version of this MAM. This procuedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

1983-01-01
HISTORICAL
MAM2241
This specification covers established metric manufacturing tolerances applicable to corrosion and heat resistant steel, iron alloy, titanium, and titanium alloy bars and wire ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

1994-04-01
HISTORICAL
MAM2241A
This specification covers established metric manufacturing tolerances applicable to corrosion and heat resistant steel, iron alloy, titanium, and titanium alloy bars and wire ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

1996-01-01
HISTORICAL
MAM2241B
This specification covers established metric manufacturing tolerances applicable to corrosion and heat resistant steel, iron alloy, titanium, and titanium alloy bars and wire ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range. AMS 2241 is the inch/pound version of this MAM.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel Tubing

1994-04-01
HISTORICAL
MAM2243B
This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat resistant steel ordered to metric dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel Tubing

2003-03-12
HISTORICAL
MAM2243C
This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat resistant steel ordered to metric dimensions. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel Tubing

1987-01-01
HISTORICAL
MAM2243A
This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat resistant steel ordered to metric dimension. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel Tubing

1980-07-01
HISTORICAL
MAM2243
This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat resistant steel ordered to metric dimension. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel Tubing

2007-09-13
CURRENT
MAM2243D
This specification covers manufacturing tolerances applicable to seamless and welded tubing of corrosion and heat resistant steel ordered to metric dimension. These tolerances apply to all conditions and are based on individual measurements, unless otherwise noted. Tubing may be specified by two dimensions only (OD and wall thickness, ID and wall thickness, or OD and ID).
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

2007-07-19
CURRENT
MAM2241E
This specification covers established metric manufacturing tolerances applicable to corrosion and heat resistant steel, iron alloy, titanium, and titanium alloy bars and wire ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate

2001-03-01
HISTORICAL
MAM2242B
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of corrosion and heat resistant steels, iron alloys, titanium, and titanium alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range. These tables are based upon logical metric values and preferred metric sizes. Throughout this specification the term "metric" is intended to refer to the SI system. AMS 2242 is the inch/pound version of this MAM.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

2003-03-12
HISTORICAL
MAM2241D
This specification covers established metric manufacturing tolerances applicable to corrosion and heat resistant steel, iron alloy, titanium, and titanium alloy bars and wire ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

1998-10-01
HISTORICAL
MAM2241C
This specification covers established metric manufacturing tolerances applicable to corrosion and heat resistant steel, iron alloy, titanium, and titanium alloy bars and wire ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate

2007-09-13
CURRENT
MAM2242D
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of corrosion and heat resistant steels, iron alloys, titanium, and titanium alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range.
Standard

Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate

2003-03-12
HISTORICAL
MAM2242C
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of corrosion and heat resistant steels, iron alloys, titanium, and titanium alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range. These tables are based upon logical metric values and preferred metric sizes. Throughout this specification the term "metric" is intended to refer to the SI system. AMS 2242 is the inch/pound version of this MAM.
X