Refine Your Search

Search Results

Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

1991-10-01
HISTORICAL
MAM2303
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria.
Standard

Steel Cleanliness, Aircraft Quality, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

2007-07-19
CURRENT
MAM2303E
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria.
Standard

Aircraft Quality Steel Cleanliness, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

1993-07-01
HISTORICAL
MAM2303A
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable, corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Cleanliness, Aircraft Quality Steel, Martensitic Corrosion-Resistant Steels, Magnetic Particle Inspection Procedure, Metric (SI) Measurement

2000-10-01
HISTORICAL
MAM2303B
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable, corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (Si) Measurement

2003-03-12
HISTORICAL
MAM2303D
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria. AMS 2303 is the inch/pound version of this MAM. This procuedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Steel Cleanliness, Aircraft Quality Steel Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (Si) Measurement

2001-10-01
HISTORICAL
MAM2303C
This specification covers steel cleanliness requirements in SI (Metric) units for aircraft-quality, ferromagnetic, hardenable corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria. AMS 2303 is the inch/pound version of this MAM. This procuedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat, melt, or lot of steel.
Standard

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 62ni 21.5cr 9.0mo 3.6cb Vacuum Melted, Vacuum Cast as Cast

2003-03-12
CURRENT
MAM5401B
This specification covers a corrosion and heat resistant, vacuum melted, nickel alloy in the form of investment castings. AMS 5401 is the inch/pound version of this MAM. These castings have been used typically for structural parts requiring moderate strength up to 870 degrees C and oxidation and corrosion resistance up to 980 degrees C, but usage is not limited to such applications.
Standard

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 62ni 21.5cr 9.0mo 3.6cb Vacuum Melted, Vacuum Cast as Cast

1996-09-01
HISTORICAL
MAM5401A
This specification covers a corrosion and heat resistant, vacuum melted, nickel alloy in the form of investment castings. AMS 5401 is the inch/pound version of this MAM. These castings have been used typically for structural parts requiring moderate strength up to 870 degrees C and oxidation and corrosion resistance up to 980 degrees C, but usage is not limited to such applications.
Standard

Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 62ni 21.5cr 9.0mo 3.6cb Vacuum Melted, Vacuum Cast as Cast

1988-01-01
HISTORICAL
MAM5401
This specification covers a corrosion and heat resistant, vacuum melted, nickel alloy in the form of investment castings. AMS 5401 is the inch/pound version of this MAM. These castings have been used typically for structural parts requiring moderate strength up to 870 degrees C and oxidation and corrosion resistance up to 980 degrees C, but usage is not limited to such applications.
Standard

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 995 to 1040°C Solution Heat Treated

1989-07-01
HISTORICAL
MAM5706A
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading procured in SI (metric) units. AMS 5706 is the inch/pound version of this MAM. These products have been used typically for parts, such as fasteners, flanges, and rings, requiring high strength up to 815 degrees C and oxidation resistance up to 955 degrees C, particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.
Standard

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 995 to 1040°C Solution Heat Treated

1987-10-01
HISTORICAL
MAM5706
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading procured in SI (metric) units. AMS 5706 is the inch/pound version of this MAM. These products have been used typically for parts, such as fasteners, flanges, and rings, requiring high strength up to 815 degrees C and oxidation resistance up to 955 degrees C, particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.
Standard

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5ni 19cr 3.0mo 5.0cb 0.90ti 0.50al 18fe Consumable Electrode Or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated

1995-05-01
HISTORICAL
MAM5914
This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and foil up to 0.38 millimeters in nominal thickness procured in SI (Metric) units. AMS 5914 is the inch/pound version of this MAM. These products have been used typically for the fabrication of bellows, diaphragms, and other components requiring a combination of high strength, resistance to heat and corrosion, leak tightness, and maximum fatigue life, but usage is not limited to such applications.
Standard

Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 995 to 1040°C Solution Heat Treated

2003-03-12
CURRENT
MAM5706C
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading procured in SI (metric) units. AMS 5706 is the inch/pound version of this MAM. These products have been used typically for parts, such as fasteners, flanges, and rings, requiring high strength up to 815 degrees C and oxidation resistance up to 955 degrees C, particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.
X