Refine Your Search

Topic

Search Results

Standard

SOFTENING POINT OF INTERIOR TRIM ADHESIVES

1994-04-21
CURRENT
J1700_199404
This SAE Recommended Practice shall be used to determine the temperature at which an adhesive softens to the point at which it no longer can support a given load.
Standard

PEEL STRENGTH OF SOFT TRIM ADHESIVES

1994-04-21
CURRENT
J1679_199404
This SAE Recommended Practice shall be used to determine the peel strength achieved by an adhesive when used to bond various decorative, flexible substrates such as cloth supported vinyl or carpet, to rigid (steel), semi-rigid (SMC plastic), or other similar substrates.
Standard

OVERLAP SHEAR TEST FOR AUTOMOTIVE TYPE SEALANT FOR STATIONARY GLASS BONDING

1986-05-01
CURRENT
J1529_198605
This SAE Recommended Practice defines a procedure for the construction and testing of glass to metal lap shears for determining shear strength of sealant adhesives for automotive stationary glass bonding. This procedure can also be used for fiber reinforced plastic (FRP) when used in place of metal.
Standard

Method for Evaluating the Paintable Characteristics of Automotive Sealers

1987-04-01
HISTORICAL
J1800_198704
This SAE Recommended Practice sets forth a method for testing and evaluating the paintable characteristics of automotive sealers. this document contains three samples preparation procedures: Method 1 - topcoat over cured primer and cured sealer; Method 2 - topcoat over cured sealer; and Method 3 - topcoat over uncured sealer. This SAE test specification is to be used as a method for evaluating the performance of automotive primers and/or topcoats when applied over "cured" or "uncured" sealers. This specification includes a list of the needed test equipment, application and baking parameters, and a glossary of terms describing undesirable characteristics that should be noted by the tester. This specification covers the performance and quality of an automotive topcoat when applied over a sealer, along with the integrity of bond between the paint and sealer.
Standard

Method for Evaluating the Paintable Characteristics of Automotive Sealers

2013-07-09
CURRENT
J1800_201307
This SAE Recommended Practice sets forth a method for testing and evaluating the paintable characteristics of automotive sealers. This document contains three samples preparation procedures: Method #1: Topcoat over cured primer and cured sealer Method #2: Topcoat over cured sealer Method #3: Topcoat over uncured sealer
Standard

ABRASION RESISTANCE TESTING—VEHICLE EXTERIOR GRAPHICS AND PIN STRIPING

1989-06-01
CURRENT
J1847_198906
This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.
Standard

COACH JOINT FRACTURE TEST

1993-11-01
CURRENT
J1863_199311
This SAE Recommended Practice defines a procedure for determining the cleavage strength of an adhesive used for bonding automotive oily metal substrates.
Standard

Coach Joint Fracture Test

1987-04-01
HISTORICAL
J1863_198704
This SAE Recommended Practice defines a procedure for determining the cleavage strength of an adhesive used for bonding automotive oily metal substrates.
Standard

PEEL ADHESION TEST FOR GLASS TO ELASTOMERIC MATERIAL FOR AUTOMOTIVE GLASS ENCAPSULATION

1988-10-01
CURRENT
J1907_198810
This recommended practice defines a procedure for the construction and testing of a 180 deg peel specimen for the purpose of determining the bondability of glass to elastomeric material in automotive modular glass. This test method suggests that elastomeric material of less than 172 mpa modulus be used as the encapsulating material. The present practice of encapsulating automotive glass is described as molded-in-place elastomeric material onto the outer edge of the glass using thermoplastic or thermosetting material that quickly sets in the mold. The glass is removed from the mold with the cured elastomeric material bonded to the perimeter of the glass. This encapsulated glass module can now be bonded with a sealant adhesive into the body opening of a vehicle.
Standard

INDUCTION CURE TEST FOR METAL BONDING ADHESIVES

1987-05-01
CURRENT
J1851_198705
This SAE Recommended Practice defines a procedure for determining the adhesion strength characteristics of heat-cured metal bonding adhesives subjected to induction heating.
Standard

METHOD OF VISCOSITY TEST FOR AUTOMOTIVE TYPE ADHESIVES, SEALERS, AND DEADENERS

1995-08-01
CURRENT
J1524_199508
This SAE Recommended Practice contains a series of test methods for use in measuring the viscosity of automotive-type adhesives, sealers, and deadeners. The test methods which are contained in this document are as follows: 1.1 Brookfield® Method 1.2 Castor-Severs Rheometer or Pressure Flowmeter 1.3 Penetrometer 1.4 Capillary Rheometer 1.5 Plate Rheometers
X