Refine Your Search

Search Results

Standard

HYDRAULIC CYLINDER TEST PROCEDURE

2003-06-18
CURRENT
J214_200306
This test procedure describes tests for determining characteristics of hydraulic cylinders as used on construction and industrial mobile machinery as referenced in SAE J1116. In this code, metric equivalents are established according to SAE J916. These characteristics are to be recorded on data sheets similar to the ones shown herein. Two sets of data sheets are to be submitted for each cylinder, one set at 120 °F (49 °C) and one at 180 °F (82 °C).
Standard

Hydraulic Fluid Power Circuit Filtration - Application and Methods

2019-10-02
CURRENT
J931_201910
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available, and their location and maintenance in the hydraulic circuit.
Standard

Hydraulic Fluid Power Circuit Filtration - Application & Methods

2012-08-20
HISTORICAL
J931_201208
This SAE Information Report is primarily to familiarize the designer of hydraulic powered machinery with the necessity for oil filtration in the hydraulic power circuit, the degree of system cleanliness required, types of filtration and filters available and their location and maintenance in the hydraulic circuit.
Standard

Hydraulic Motor Test Procedures

2009-06-12
HISTORICAL
J746_200906
This test code describes tests for determining characteristics of hydraulic positive displacement motors as used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the one shown in Figure 1. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F).
Standard

Hydraulic Motor Test Procedures

2019-11-20
CURRENT
J746_201911
This test code describes tests for determining characteristics of hydraulic positive displacement motors as used on off-road self-propelled work machines as referenced in SAE J1116.
Standard

Hydraulic Motor Test Procedures

1986-03-01
HISTORICAL
J746_198603
This test code describes tests for determining characteristics of hydraulic positive displacement motors as used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the one shown in Figure 1. Two sets of data sheets are to be submitted: one at 49 degrees C (120 degrees F) and one at 82 degrees C (180 degrees F). This test code establishes conditions for motor tests, outlines a procedure for tests, and establishes a method of presenting motor test data.
Standard

Control Valve Test Procedure

1974-10-01
HISTORICAL
J747B_197410
This SAE Standard applies to hydraulic directional control valves as applied to self-propelled work machines referenced in SAE J1116. It describes a laboratory test procedure for evaluating: a.) Flow versus pressure drop, b.) Leakage rate, c.) Operating effort, d.) Metering characteristics versus spool travel, pilot pressure, or electrical current, e.) Relief valve characteristics. This document applies to single and multiple section hydraulic directional control valves. This document illustrates axial, manually operated valves although the test procedure is applicable to other input forms such as rotary actuation, electric current, hydraulic or pneumatic pressure.
Standard

Control Valve Test Procedure

1986-03-01
HISTORICAL
J747_198603
This SAE Standard applies to hydraulic directional control valves as applied to self-propelled work machines referenced in SAE J1116. It describes a laboratory test procedure for evaluating: a.) Flow versus pressure drop, b.) Leakage rate, c.) Operating effort, d.) Metering characteristics versus spool travel, pilot pressure, or electrical current, e.) Relief valve characteristics. This document applies to single and multiple section hydraulic directional control valves. This document illustrates axial, manually operated valves although the test procedure is applicable to other input forms such as rotary actuation, electric current, hydraulic or pneumatic pressure.
Standard

Hydraulic Directional Control Valves, 3000 psi Maximum

2019-12-04
CURRENT
J748_201912
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread "O" ring connection.
Standard

Hydraulic Directional Control Valves, 3000 PSI Maximum

2014-10-24
HISTORICAL
J748_201410
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread "O" ring connection.
Standard

Hydraulic Directional Control Valves, 3000 Psi Maximum

1986-03-01
HISTORICAL
J748_198603
This SAE Recommended Practice has been set up by Subcommittee 4 of the Off-Road Machinery Technical Committee and is primarily for directional control valves on construction and industrial machinery equipment as referenced in SAE J1116. The purpose is to establish port area to flow relationship and match valve spool eye ends in relation to rated capacity. Port connections are optional for either the 4-bolt split flange connection or the internal straight thread 'O' ring connection.
Standard

Method for Assessing the Cleanliness Level of New Hydraulic Fluid

2012-10-02
HISTORICAL
J1277_201210
To provide a method by which to assess the cleanliness of new hydraulic fluids. The method is applicable to new mineral and synthetic hydraulic fluids - regardless of packaging. This SAE Standard is not intended as a procedure for operating equipment.
Standard

Method for Assessing the Cleanliness Level of New Hydraulic Fluid

2018-10-04
CURRENT
J1277_201810
To provide a method by which to assess the cleanliness of new hydraulic fluids. The method is applicable to new mineral and synthetic hydraulic fluids - regardless of packaging. This SAE Standard is not intended as a procedure for operating equipment.
Standard

Method for Assessing the Cleanliness Level of New Hydraulic Fluid

1982-05-01
HISTORICAL
J1277_198205
To provide a method by which to assess the cleanliness of new hydraulic fluids. The method is applicable to new mineral and synthetic hydraulic fluids - regardless of packaging. This SAE Standard is not intended as a procedure for operating equipment.
Standard

Hydraulic Cylinder Rod Corrosion Test

2015-03-05
CURRENT
J1333_201503
SAE J1333 applies to hydraulic cylinders which are components of self-propelled work machines defined in SAE J1116.
X