Refine Your Search

Topic

Search Results

Standard

Oil Cooler Application Testing and Nomenclature

2017-03-21
CURRENT
J1468_201703
This SAE Recommended Practice is applicable to oil-to-air and oil-to-coolant oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, engine oil, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results.
Standard

Oil Cooler Application Testing and Nomenclature

2010-10-01
HISTORICAL
J1468_201010
This SAE Recommended Practice is applicable to oil-to-air and oil-to-water oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results.
Standard

Oil Cooler Application Testing and Nomenclature

1985-11-01
HISTORICAL
J1468_198511
This SAE Recommended Practice is applicable to oil-to-air oil coolers installed on mobile or stationary equipment. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results. For information regarding application testing of oil-to-water oil coolers for heat transfer performance, see SAE J2414.
Standard

Air-to-Air Charge Air Cooler (CAC) Internal Cleanliness

2000-11-01
HISTORICAL
J1726_200011
This SAE Standard outlines the acceptance criteria and procedure for determining the internal cleanliness of CAC assemblies ready for installation in the engine air intake loop in vehicular or stationary applications.
Standard

Air-To-Air Charge Air Cooler (Cac) Internal Cleanliness

1995-12-01
HISTORICAL
J1726_199512
This SAE Recommended Practice outlines the acceptance criteria and procedure for determining CAC internal cleanliness as it applies to complete assemblies ready for engine air intake loop installation, be it a vehicular or stationary application.
Standard

Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests

2018-07-12
CURRENT
J1436_201807
This SAE Recommended Practice is applicable to all engine cooling systems used in (1) Heavy-duty vehicles, industrial applications, and (2) Automotive applications. There are two categories of coolant reservoir tanks covered in the document: a Pressurized tanks b Un-pressurized tanks
Standard

Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests

2004-07-13
HISTORICAL
J1436_200407
This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles and industrial applications. The purpose of this document is to list the requirements which are in general use for filling, deaeration, and drawdown of engine cooling systems for heavy-duty and industrial applications. The material presented in this document is for information purposes only, and does not constitute an SAE Standard.
Standard

Requirements for Engine Cooling System Filling, Deaeration and Drawdown Tests

1995-07-01
HISTORICAL
J1436_199507
This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles and industrial applications. The purpose of this document is to list the requirements which are in general use for filling, deaeration, and drawdown of engine cooling systems for heavy-duty and industrial applications. The material presented in this document is for information purposes only, and does not constitute an SAE Standard.
Standard

Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests

1989-06-01
HISTORICAL
J1436_198906
This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles, industrial applications, and automotive applications The purpose of this document is to list the requirements which are in general use for filling, deaeration, and drawdown of engine cooling systems for heavy-duty, industrial and automotive applications. Due to the differences in heavy duty and automotive cooling systems, they are dealt with in separate sections of this report. In the case of heavy duty, these procedures apply to both the main jacket water pump and separate circuit water pumps. The material presented in this document is for information purposes only, and does not constitute a SAE Standard.
Standard

Pressure Relief for Cooling System

2020-04-28
CURRENT
J151_202004
This SAE Recommended Practice specifies requirements for pressure relief means and pressure relief rating identification for cooling systems of liquid-cooled engines to reduce the possibility of injuries during opening of the cooling system.
Standard

Pressure Relief for Cooling System

2015-08-27
HISTORICAL
J151_201508
This SAE Recommended Practice specifies requirements for pressure relief means and pressure relief rating identification for cooling systems of liquid-cooled engines to reduce the possibility of injuries during opening of the cooling system.
Standard

Heavy-Duty Nonmetallic Engine Cooling Fans--Material, Manufacturing, and Test Considerations

2012-02-06
CURRENT
J1474_201202
The following topics are included in this report: Section 2 - References Section 3-Definitions Section 4 - Material Selection Section 5 - Production Considerations Section 6 - Initial Structural Integrity Section 7 - In-Vehicle Testing Section 8 - Laboratory Testing The Material Selection section lists environmental factors and material properties which should be considered when determining appropriate fan material(s) for a given application. The Production Considerations section covers various aspects of machine selection, mold design, and process control. The Initial Structural Integrity section lists factors which should be considered in addition to those covered by Section 3 of SAE J1390. The In-Vehicle Testing section lists factors which should be considered in addition to those covered by Section 4 of SAE J1390.
Standard

Heavy-Duty Nonmetallic Engine Cooling Fans--Material, Manufacturing, and Test Considerations

2009-12-14
HISTORICAL
J1474_200912
The following topics are included in this report: Section 2-References Section 3-Definitions Section 4-Material Selection Section 5-Production Considerations Section 6-Initial Structural Integrity Section 7-In-Vehicle Testing Section 8-Laboratory Testing The Material Selection section lists environmental factors and material properties which should be considered when determining appropriate fan material(s) for a given application. The Production Considerations section covers various aspects of machine selection, mold design, and process control. The Initial Structural Integrity section lists factors which should be considered in addition to those covered by Section 3 of SAE J1390. The In-Vehicle Testing section lists factors which should be considered in addition to those covered by Section 4 of SAE J1390.
Standard

Heavy-Duty Nonmetallic Engine Cooling Fans Material, Manufacturing, and Test Considerations

2003-04-25
HISTORICAL
J1474_200304
The following topics are included in this report: Section 2-References Section 3-Definitions Section 4-Material Selection Section 5-Production Considerations Section 6-Initial Structural Integrity Section 7-In-Vehicle Testing Section 8-Laboratory Testing The Material Selection section lists environmental factors and material properties which should be considered when determining appropriate fan material(s) for a given application. The Production Considerations section covers various aspects of machine selection, mold design, and process control. The Initial Structural Integrity section lists factors which should be considered in addition to those covered by Section 3 of SAE J1390. The In-Vehicle Testing section lists factors which should be considered in addition to those covered by Section 4 of SAE J1390.
Standard

Heavy-Duty Nonmetallic Engine Cooling Fans--Material, Manufacturing, and Test Considerations

1985-01-01
HISTORICAL
J1474_198501
The following topics are included in this report: Section 2 - References Section 3-Definitions Section 4 - Material Selection Section 5 - Production Considerations Section 6 - Initial Structural Integrity Section 7 - In-Vehicle Testing Section 8 - Laboratory Testing The Material Selection section lists environmental factors and material properties which should be considered when determining appropriate fan material(s) for a given application. The Production Considerations section covers various aspects of machine selection, mold design, and process control. The Initial Structural Integrity section lists factors which should be considered in addition to those covered by Section 3 of SAE J1390. The In-Vehicle Testing section lists factors which should be considered in addition to those covered by Section 4 of SAE J1390.
X