Refine Your Search

Search Results

Viewing 1 to 7 of 7
Technical Paper

A Dynamic Test Bench for the Cooling Water Pump Characterization under Real Operating Conditions

2018-05-30
2018-37-0024
The dynamic performances of the cooling circuit have a great impact on ICE efficiency and CO2 emissions. Engine thermal management is among the most promising technologies able to offer a sensible reduction in terms of engine fuel consumption and CO2 emission. These aspects are widely treated in literature and many technologies are already on the market or ready to be used. A reduced attention in literature, has been done on the pump performances during the real operating conditions. Homologation cycles try to reproduce these conditions. In light duty vehicles these cycles consist in accelerating and decelerating the engine following a specified velocity-time sequence. According to this procedure, the propulsion power requested by the vehicle is low, and the power absorbed by the auxiliaries became significant. The pump of the cooling fluid is the most important component among the auxiliaries.
Technical Paper

Effects of an ORC Based Heat Recovery System on the Performances of a Diesel Engine

2015-04-14
2015-01-1608
A smart way to reduce CO2 emission in transportation sector is to recover energy usually wasted and re-use it for engine and vehicle needs. ORC plant on exhaust gas of ICE is really interesting, but it has a significant impact on the exhaust line and vehicle's weight. The backpressure realized in the exhaust and the weight gain, in fact, produce a specific fuel consumption increase as well as an increase in the propulsion power: both terms could vanish the energy recovered. The paper discusses the effects of the pressure losses produced by an ORC plant mounted on the exhaust line of an IVECO F1C test bench engine. The interactions produced on the turbocharged engine have been experimentally investigated: the presence of an IGV turbocharger makes the effect of the backpressure not straightforward to be predicted and needed a full experimental testing of the group in order to understand its reaction and the net effect in terms of specific fuel consumption.
Technical Paper

Development of Thermal Modeling in Support of Engine Cooling Design

2013-09-08
2013-24-0090
The growing interest on environmental issues related to vehicles is pushing up the research on reciprocating internal combustion engines which seems to be endless and able to insure to combustion engines a long future. Euro standards imposed a significant reduction of pollutant emissions and were the stimulus to favor the conception of technologies which represented real breakthroughs; the recent directives on greenhouse gases emissions further reinforced the concept of reducing fuel consumption and, consequently, carbon dioxide emissions. So, new technological efforts have to be made on internal combustion engines in order to achieve this additional target: several technological options are already available or under studying, but only a few of these are suitable, in particular, in terms of costs attendance per unit of CO2 saved. Among these technologies, a revision of engine cooling system seems to have good potentiality.
Technical Paper

Engine oil Thermal Management: Oil Sump Volume Modification and Heating by Exhaust Heat During ICE Warm Up

2018-04-03
2018-01-1366
In the perspective of fuel saving and emissions reduction, engine oil thermal management has not yet received the attention it deserves. Lubricating oil, in fact, should be the focus of a specific warmup action: the expected benefits is on friction reduction – mechanical efficiency improvement – but also on a positive interaction with the cooling fluid thermal dynamics. The lower thermal capacity of the circulating oil (with respect to the cooling fluid) and the instantaneous reduction of the viscosity due to temperature increase produces a faster engine overall efficiency benefit: this invites to focus specific actions on its thermal management in the direction of speeding up the temperature rise during a cold engine starting.
Journal Article

Experimental Analysis of an Organic Rankine Cycle Plant Bottoming a Heavy-Duty Engine Using Axial Turbine as Prime Mover

2017-06-29
2017-01-9279
The use of reciprocating internal combustion engines (ICE) dominates the sector of the on-road transportation, both for passengers and freight. CO2 reduction is the present technological driver, considering the major worldwide greenhouse reduction targets committed by most governments in the western world. In the near future (2020) these targets will require a significant reduction with respect to today’s goals, reinforcing the importance of reducing fuel consumption. In ICEs more than one third of the fuel energy used is rejected into the environment as thermal waste through exhaust gases. Therefore, a greater fuel economy could be achieved if this energy is recovered and converted into useful mechanical or electrical power on board. For long haul vehicles, which run for hundreds of thousands of miles per year at relatively steady conditions, this recovery appears especially worthy of attention.
Journal Article

A Model Approach to the Sizing of an ORC Unit for WHR in Transportation Sector

2017-09-04
2017-24-0159
Internal combustion engines are actually one of the most important source of pollutants and greenhouse gases emissions. In particular, on-the-road transportation sector has taken the environmental challenge of reducing greenhouse gases emissions and worldwide governments set up regulations in order to limit them and fuel consumption from vehicles. Among the several technologies under development, an ORC unit bottomed exhaust gas seems to be very promising, but it still has several complications when it is applied on board of a vehicle (weight, encumbrances, backpressure effect on the engine, safety, reliability). In this paper, a comprehensive mathematical model of an ORC unit bottomed a heavy duty engine, used for commercial vehicle, has been developed.
Technical Paper

Optimization of the Engine Intake Air Temperature through the Air Conditioning Unit

2018-04-03
2018-01-0973
In modern turbocharged internal combustion engines the cooling of the air after the compression stage is the standard technique to reduce temperature of the engine intake air aimed at improving cylinder filling (volumetric efficiency) and, therefore, overall global efficiency. At present, standard values for the intake air temperature are in the range 30-70°C, dependently on engine load, external air conditions and vehicle speed and the adoption of a dedicated cooling fluid operating at low temperatures (-10-0°C) is addressed as the most viable option to achieve an effective temperature reduction. This paper investigates a pilot engine set-up, featuring an evaporator on the intake line of a turbocharged diesel engine, tested on a high speed dynamometer bench: the evaporator was a part of an air refrigeration unit – the same used for cabin cooling - composed also by a compressor, a condenser and a thermostatic expansion valve.
X