Search Results

In this study, tests were performed with modified tires at the right rear location on a solid rear axle sport utility vehicle to compare the vehicle inputs from both: (1) tire tread belt detachments staged by circumferentially cut tires, and (2) a tire tread detachment staged by distressing a tire in a laboratory environment. The forces and moments that transfer through the road wheel were measured at the right and left rear wheel locations using wheel force transducers; displacements were measured between the rear axle and the frame at the shock absorber mounting locations, ride height displacements were measured at the four corners of the vehicle, and accelerations were measured on the rear axle. Onboard vehicle accelerations and velocities were measured as well. The data shows that the tire tread belt detachments prepared by circumferentially cut tires and distressed tires have similar inputs to the vehicle.

In this study, tests were performed with modified tires at the right rear location on a solid axle sport utility vehicle to compare vehicle inputs and responses from both: (1) staged tire tread belt detachments, and (2) stepped diameter (“lumpy”) tires. Lumpy tires consist of equal size sections of tread that are vulcanized at equidistant locations around the outer circumference of the tire casing. Some have used lumpy tires in attempt to model the force and displacement inputs created by a tire tread belt separation. Four configurations were evaluated for the lumpy tires: 1-Lump, 2-Lump (2 lengths), and 3-Lump.

It is well known that tire force and moment properties are affected by numerous design variables such as tire size, type, compounding, and construction. It is also true that environmental conditions such as rain, snow, or road surface type can alter the cornering capacity of a tire. In this study, specific environmental parameters related to water on the roadway are varied to study the effects on the force and moment properties of modern radial tires. The parameters under study included translational velocity and water depth during standard sweep testing at two different vertical loads. The force and moment characteristics of seven different tires were tested at the Calspan Tire Research Facility in Buffalo, New York. The slip angle sweep tests were conducted on the Flat Trac tire machine at various belt speeds, normal loads, and water depths.

In the field of accident reconstruction, it is often important to measure the deformation of a vehicle (i.e. automobile, truck, motorcycle, etc.) after a crash has occurred. This data can be used for many purposes including energy calculations for speed loss, measuring roof or other structural deformation, analyzing seat or seat belt component positions, frame or unitized body structure deformation, and for estimating the actual post crash condition of a vehicle prior to the damage inflicted by the cutting and spreading tools used by emergency personnel. Traditionally, vehicle damage was measured using plumb bobs and tape measures or laser transits. However, these methods are not only time consuming but they also require a significant amount of upfront analysis to determine which points on the vehicle to measure at the inspection. In recent years, newer methods such as photogrammetry software and three dimensional scanners have come into play.

There have been many articles published in the last decade or so concerning the components of an electronic stability control (ESC) system, as well as numerous statistical studies that attempt to predict the effectiveness of such systems relative to crash involvement. The literature however is free from papers that discuss how engineers might develop such systems in order to achieve desired steering, handling, and stability performance. This task is complicated by the fact that stability control systems are very complex and their designs and what they can do have changed considerably over the years. These systems also differ from manufacturer to manufacturer and from vehicle to vehicle in a given maker of automobiles. In terms of ESC hardware, differences can include all the components as well as the addition or absence of roll rate sensors or active steering gears to name a few.

There have been several recent articles published concerning the effect of a tire tread separation on vehicle handling, but lately the literature has been silent on the situation where a tire airs out. This paper studies how various vehicles steer and handle during and after a tire deflates while the vehicle is traveling at speed. Utility vehicles, pickup trucks, and vans were tested by deflating front and rear tires. The air out condition was created by using a special test device that fired a twelve gauge shotgun shell at the sidewall of a tire while the vehicle was traveling at freeway speeds. The vehicles were instrumented with on board video equipment and a computer with transducers to measure both driver inputs and vehicle responses during the testing. The results show that a rapid tire air out creates a slight pull to the side of the deflated tire which then requires a small corrective steer to maintain a straight ahead course.

One important part of the vehicle design process is suspension design and tuning. This is typically performed by design engineers, experienced expert evaluators, and assistance from vehicle dynamics engineers and their computer simulation tools. Automotive suspensions have two primary functions: passenger and cargo isolation and vehicle control. Suspension design, kinematics, compliance, and damping, play a key role in those primary functions and impact a vehicles ride, handling, steering, and braking dynamics. The development and tuning of a vehicle kinematics, compliance, and damping characteristic is done by expert evaluators who perform a variety of on road evaluations under different loading configurations and on a variety of road surfaces. This “tuning” is done with a focus on meeting certain target characteristics for ride, handling, and steering One part of this process is the development and tuning of the damping characteristics of the shock absorbers.