Refine Your Search

Search Results

Viewing 1 to 20 of 20
Standard

Groove Design - Metal Face Seal

1969-07-15
CURRENT
AIR1108
Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.
Standard

Modules and Basic Racks of Metric Spur and Helical Gears

2018-09-11
CURRENT
AS1560B
This SAE Aerospace Standard (AS) establishes the standard modules for aerospace metric involute gear teeth and establishes the tooth dimensions of aerospace metric involute gear teeth in terms of the conjugate rack type cutter whose counterpart reference profile is called the basic rack profile of the generated gear, having the tooth dimensions expressed in terms proportional to the module.
Standard

Modules and Basic Racks of Metric Spur and Helical Gears

1996-05-01
HISTORICAL
AS1560A
This SAE Aerospace Standard (AS) establishes the standard modules for aerospace metric involute gear teeth and establishes the tooth dimensions of aerospace metric involute gear teeth in terms of the conjugate rack type cutter whose counterpart reference profile is called the basic rack profile of the generated gear, having the tooth dimensions expressed in terms proportional to the module.
Standard

GROOVE DESIGN, METAL O-RING GASKET

1988-06-20
HISTORICAL
ARP674A
Groove designs presented herein are applicable for use with the following MS metal o-ring gaskets, or to dimensionally equivalent gaskets of other materials: AMS 5570 or AMS 5576 Plain AMS 5570 or AMS 5576 Silver P1. MS9141 - 0.035 tube x 0.006 wall MS9371 - 0.035 tube x 0.006 wall MS9142 - 0.062 tube x 0.006 wall MS9372 - 0.062 tube x 0.006 wall MS9202 - 0.062 tube x 0.010 wall MS9373 - 0.062 tube x 0.010 wall MS9203 - 0.094 tube x 0.006 wall MS9374 - 0.094 tube x 0.006 wall MS9204 - 0.094 tube x 0.010 wall MS9375 - 0.094 tube x 0.010 wall MS9205 - 0.125 tube x 0.010 wall MS9376 - 0.125 tube x 0.010 wall
Standard

Groove Design, Metal O-Ring Gasket

2001-07-01
HISTORICAL
ARP674C
Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube × 0.006 wall 2 AS9142 - 0.062 tube × 0.006 wall 3 AS9202 - 0.062 tube × 0.010 wall 4 AS9203 - 0.094 tube × 0.006 wall 5 AS9204 - 0.094 tube × 0.010 wall 6 AS9205 - 0.125 tube × 0.010 wall b AMS 5570 or AMS 5576 Silver Plated 1 AS9371 - 0.035 tube × 0.006 wall 2 AS9372 - 0.062 tube × 0.006 wall 3 AS9373 - 0.062 tube × 0.010 wall 4 AS9374 - 0.094 tube × 0.006 wall 5 AS9375 - 0.094 tube × 0.010 wall 6 AS9376 - 0.125 tube × 0.010 wall NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).
Standard

GROOVE DESIGN, METAL O-RING GASKET

1998-01-01
HISTORICAL
ARP674B
Groove designs presented herein are applicable for use with the following MS metal O-ring gaskets, or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 MS9141 - 0.035 tube x 0.006 wall 2 MS9142 - 0.062 tube x 0.006 wall 3 MS9202 - 0.062 tube x 0.010 wall 4 MS9203 - 0.094 tube x 0.006 wall 5 MS9204 - 0.094 tube x 0.010 wall 6 MS9205 - 0.125 tube x 0.010 wall b AMS 5570 or AMS 5576 Silver PI. 1 MS9371 - 0.035 tube x 0.006 wall 2 MS9372 - 0.062 tube x 0.006 wall 3 MS9373 - 0.062 tube x 0.010 wall 4 MS9374 - 0.094 tube x 0.006 wall 5 MS9375 - 0.094 tube x 0.010 wall 6 MS9376 - 0.125 tube x 0.010 wall
Standard

Groove Design, Metal O-Ring Gasket

2018-03-30
CURRENT
ARP674D
Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials: a AMS 5570 or AMS 5576 Plain 1 AS9141 - 0.035 tube × 0.006 wall 2 AS9142 - 0.062 tube × 0.006 wall 3 AS9202 - 0.062 tube × 0.010 wall 4 AS9203 - 0.094 tube × 0.006 wall 5 AS9204 - 0.094 tube × 0.010 wall 6 AS9205 - 0.125 tube × 0.010 wall b AMS 5570 or AMS 5576 Silver Plated 1 AS9371 - 0.035 tube × 0.006 wall 2 AS9372 - 0.062 tube × 0.006 wall 3 AS9373 - 0.062 tube × 0.010 wall 4 AS9374 - 0.094 tube × 0.006 wall 5 AS9375 - 0.094 tube × 0.010 wall 6 AS9376 - 0.125 tube × 0.010 wall NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).
Standard

GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL

1973-04-01
HISTORICAL
ARP1232
This document establishes standard gland dimensions for static radial O-ring seal applications and provides recommendations for modifying these glands in special applications. No provisions are made in this document for anti-extrusion devices. SI unit conversions for U.S. customary units have been provided for reference purposes.
Standard

GLAND DESIGN, ELASTOMERIC O-RING SEALS, DYNAMIC RADIAL, 1500 PSI MAX

1977-04-01
HISTORICAL
ARP1233
This document establishes standard gland design criteria and dimensions for dynamic radial O-ring seal applications and provides recommendations for modifying these glands in special applications. There are no provisions in this document for anti-extrusion devices.
X