Refine Your Search

Search Results

Viewing 1 to 14 of 14
Standard

Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric

2013-02-10
CURRENT
MA4535A
This SAE Metric Aerospace Standard (MA) provides dimensional, performance, testing and other requirements for high strength, thin wall, double head box and combination wrenches which possess an internal wrenching design so configured that, when mated with hexagon (6 point) fasteners, they shall transmit torque to the fastener without bearing on the apex of the fastener’s wrenching points. This standard provides additional requirements beyond ANSI B107.9 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Wrenches, Twelve Spline, Metric

1989-11-01
CURRENT
MA1547A
This standard covers the design, performance, and test requirements for high strength, thin wall, commercial sockets, universal sockets, and box wrenches used for the attachment and detachment of metric spline drive, high strength, and high temperature aircraft fasteners. Inclusion of dimensional data in this standard is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. This standard is based on, but not limited to, the following external spline wrenching system:
Standard

Study of Wrenching Engagement on AS870C Double Hexagon (12 Point) Fasteners

1997-03-01
CURRENT
AIR1936A
This study addresses the adequacy of sockets, wrenches, and torque adapters conforming to AS954 to wrench 12 point fasteners with wrenching configurations conforming to AS870C. Reported wrenching problems with smaller sizes are investigated through examining the combined tolerances on the fasteners and wrenches, conducting torque testing on typical high strength lock nuts. Possible solutions to correct these wrenching problems are presented.
Standard

Handles and Attachments for Hand Socket Wrenches

2017-12-07
CURRENT
AS4283C
This SAE International Standard covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ASME B107.110, Category 10 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Driver Drills, Battery Powered

2017-01-04
CURRENT
AS4786B
This SAE Aerospace Standard (AS) covers variable speed, reversible battery powered drills with removable, rechargeable battery pack and either 3/8 inch or ½ inch chuck used for general maintenance and construction where a battery powered tool is required. This document also satisfies EMI requirements for driver drills, where EMI suppression is required by the purchaser. This document may involve hazardous materials, operations, or equipment and does not purport to address all of the safety considerations associated. It is the responsibility of the user of a piece of equipment to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer’s instructions prior to use.
Standard

Driver Drills Battery Powered

1995-12-01
HISTORICAL
AS4786
This SAE Aerospace Standard (AS) covers variable speed, reversible 0.375 (3/8) in chuck battery powered drills, with removable, rechargeable battery pack, used for general maintenance and construction where a battery powered tool is required. When electromagnetic interference (EMI) suppression is required by the purchaser, this document satisfies EMI requirements for driver drills. This document may involve hazardous materials, operations, or equipment. This document does not purport to address all the safety problems associated with its use. It is the responsibility of the user of this equipment to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer's instructions prior to use.
Standard

Driver Drills, Battery Powered

2011-03-30
HISTORICAL
AS4786A
This SAE Aerospace Standard (AS) covers variable speed, reversible battery powered drills with removable, rechargeable battery pack and either 3/8 inch or ½ inch chuck used for general maintenance and construction where a battery powered tool is required. This document also satisfies EMI requirements for driver drills, where EMI suppression is required by the purchaser. This document may involve hazardous materials, operations, or equipment and does not purport to address all of the safety considerations associated. It is the responsibility of the user of a piece of equipment to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer’s instructions prior to use.
Standard

Handles and Attachments for Hand Socket Wrenches

2011-12-12
HISTORICAL
AS4283B
This SAE International Standard covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ASME B107.10 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

HANDLES AND ATTACHMENTS FOR HAND SOCKET WRENCHES

1991-08-01
HISTORICAL
AS4283
This SAE Aerospace Standard (AS) covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ANSI B107.10M appropriate for aerospace use. The use of adapters, either enlarging or reducing, for turning high-strength fasteners is an unsafe practice. Adapters are not included in this document. The listing of tools in this document does not insure that they are available commercially.
Standard

Handles and Attachments for Hand Socket Wrenches

1994-05-01
HISTORICAL
AS4283A
This SAE Aerospace Standard (AS) covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ANSI B107.10M appropriate for aerospace use. The use of adapters, either enlarging or reducing, for turning high-strength fasteners is an unsafe practice. Adapters are not included in this document. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Coating Requirements for Aerospace Hand Tools

2018-09-26
CURRENT
AS4984B
This SAE Aerospace Standard (AS) covers requirements for nickel-chromium coatings, black oxide or black phosphate coatings, and alternative coatings for aerospace hand tools.
Standard

Coating Requirements for Aerospace Hand Tools

1999-05-01
HISTORICAL
AS4984
This SAE Aerospace Standard (AS) covers requirements for nickel-chromium coatings, black oxide or black phosphate coatings, and alternate coatings for aerospace hand tools.
Standard

Coating Requirements for Aerospace Hand Tools

2011-07-08
HISTORICAL
AS4984A
This SAE Aerospace Standard (AS) covers requirements for nickel-chromium coatings, black oxide or black phosphate coatings, and alternate coatings for aerospace hand tools.
X