Refine Your Search

Topic

Search Results

Standard

High and Low Crown (Blind, Acorn) Hex Nuts

2016-11-18
CURRENT
J483_201611
Included in this SAE Recommended Practice are complete general and dimensional data for the high and low types of crown nuts recognized as SAE Standard. These nuts are primarily intended for application in automotive and other ground-based motor vehicles and industrial equipment to provide an ornamental or protective closure over end of bolts, studs, or screws.
Standard

High and Low Crown (Blind, Acorn) Hex Nuts

2013-04-15
HISTORICAL
J483_201304
Included in this SAE Recommended Practice are complete general and dimensional data for the high and low types of crown nuts recognized as SAE Standard. These nuts are primarily intended for application in automotive and other ground-based motor vehicles and industrial equipment to provide an ornamental or protective closure over end of bolts, studs, or screws.
Standard

Mechanical and Quality Requirements for Machine Screws

1979-06-01
HISTORICAL
J82_197906
This SAE Standard covers the mechanical and quality requirements for two grades of carbon steel, slotted and recessed, 82 degree flat countersunk, 82 degree oval countersunk, pan, fillister, hex, and hex washer head machine screws in sizes No. 4 through 3/4 in. for use in automotive and related industries. The dimensions of these screws are covered in SAE J478.
Standard

Mechanical and Quality Requirements for Machine Screws

1998-05-01
HISTORICAL
J82_199805
This SAE Standard covers the mechanical and quality requirements for two grades of carbon steel, slotted and recessed, 82 degree flat countersunk, 82 degree oval countersunk, pan, fillister, hex, and hex washer head machine screws in sizes No. 4 through 3/4 in. for use in automotive and related industries. The dimensions of these screws are covered in ASME B.18.6.3.
Standard

Mechanical and Quality Requirements for Machine Screws

2013-01-08
CURRENT
J82_201301
This SAE Standard covers the mechanical and quality requirements for two grades of carbon steel, slotted, and recessed, 82 degrees flat countersunk, 82 degrees oval countersunk, pan, fillister, hex, and hex washer head machine screws in sizes No. 4 through 3/4 in for use automotive and related industries. The dimensions of these screws are covered in ASME B18.6.3.
Standard

Rod Ends and Clevis Pins

1961-06-01
HISTORICAL
J493_196106
Material--SAE 1010 or SAE 1111 steel or equivalent. Clevis pins shall be supplied either soft or cyanide hardened as specified. Clevis pins must be free from burrs, loose scale, sharp edges, and all other defects that might affect their serviceability. General tolerances for all dimensions are plus or minus 0.010 unless otherwise specified.
Standard

Grooved Straight Pins

1964-06-01
HISTORICAL
J494_196406
Material-Cold drawn SAE 1112 or 1113 steel, alloy steel or copper alloy as specified by purchaser. Unless otherwise specified, steel pins shall have a flash plate of cadmium or zinc for protection of pins in transit or storage. Grooved Straight Pins must be free from burrs and all other defects that might affect their use and serviceability.
Standard

Round Head Bolts

1990-01-01
CURRENT
J481_199001
Round head bolts are made in two body styles: (a) A full size body, with a maximum diameter somewhat greater than the nominal diameter (not an SAE Standard except for ribbed neck bolts, Table 3); and (b) an undersize body, with a minimum diameter approximating the pitch diameter of the thread and a maximum diameter never exceeding nominal (SAE standard for all types except ribbed neck bolts). The body diameter of either style may be exceeded by a reasonable swelling or fin under the head, or under corners of the square necks, to the extent that serviceability is not affected.
Standard

Hexagon High Nuts

1998-05-01
HISTORICAL
J482_199805
Included herein are the detailed general and dimensional specifications applicable to high hex nuts. All general specifications not shown here shall conform with those applicable to hex thick nuts and hex thick slotted nuts appearing in ANSI/ASME B18.2.2. High hex nuts are primarily intended for use in automotive and other ground-based vehicles and industrial equipment where a long length of hexagon is required for wrenching purposes.
Standard

Slotted and Recessed Head Screws

1990-01-01
CURRENT
J478_199001
Included herein are complete general and dimensional data for the types of slotted and recessed head machine, tapping, and wood screws, and slotted capscrews recognized as SAE Standard. Also included are performance data for tapping screws and appendixes which provide instructions for protrusion gaging flat heads, penetration gaging of recessed heads, across corners gaging of hexagon heads, recommended hole sizes for tapping screws, and a cross reference of tapping screw type designations. The inclusion of dimensional data in this standard is not intended to imply that all of the products described are stock production sizes. Consumer interests are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Slotted and Recessed Head Screws

1962-06-01
HISTORICAL
J478A_196206
Included herein are complete general and dimensional data for the types of slotted and recessed head machine, tapping, and wood screws, and slotted capscrews recognized as SAE Standard. Also included are performance data for tapping screws and appendixes which provide instructions for protrusion gaging flat heads, penetration gaging of recessed heads, across corners gaging of hexagon heads, recommended hole sizes for tapping screws, and a cross reference of tapping screw type designations. The inclusion of dimensional data in this standard is not intended to imply that all of the products described are stock production sizes. Consumer interests are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Cotter Pins

1990-01-01
CURRENT
J487_199001
Not available.
Standard

Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins

2013-04-16
HISTORICAL
J485_201304
SAE J485 specifies the recommended nominal diameters and locations of holes in bolt or screw shanks, and nominal widths and depths of slots in nuts, for use with the recommended sizes of inch-series cotter pins, as shown in Table 1.
Standard

Holes in Bolt and Screw Shanks and Slots in Nuts for Cotter Pins

2016-11-18
CURRENT
J485_201611
SAE J485 specifies the recommended nominal diameters and locations of holes in bolt or screw shanks, and nominal widths and depths of slots in nuts, for use with the recommended sizes of inch-series cotter pins, as shown in Table 1.
Standard

Lock Washers

1974-02-01
HISTORICAL
J489B_197402
Not available.
Standard

Hexagon High Nuts

2016-11-18
CURRENT
J482_201611
Included herein are the detailed general and dimensional specifications applicable to high hex nuts. All general specifications not shown here shall conform with those applicable to hex thick nuts and hex thick slotted nuts appearing in ASME B18.2.2. High hex nuts are primarily intended for use in automotive and other ground-based vehicles and industrial equipment where a long length of hexagon is required for wrenching purposes.
X