Search Results

The purpose of this SCR filter test method is to provide standardized methods for evaluation the filter characteristics of the SCR filter by bench test methods. This, combined with data obtained from application test, maybe used to establish standards of performance for filters when tested by these standard methods. Many variation in requirements of filtration to protect the SCR supply equipment on vehicles and variations in operational conditions make it difficult to specify meaningful “in-service” performance standards by which a filter may be judged. By the use of these standard test methods, test conditions are always the same, and comparison of the laboratory performance of filters may be made with a high degree of confidence. Once the requirement of a particular application are known, performance standards for suitable filters may be established by these test methods, and adequacy of performance of filters for the job may be determined.

This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters.

This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters.

This SAE Standard defines the requirements for fluid to be used in the SAE Selective Catalytic Reduction (SCR) systems Filter Test Procedures.

This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.

This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.

This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.

This SAE Standard defines the requirements for fluid to be used in the SAE Fuel Filter Test Procedures.

This SAE Recommended Practice identifies the necessary dimensional characteristics of filter base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters. This SAE Recommended Practice is basically equivalent to the ISO 6415-1981 and ISO 7654-1983 except for differences detailed in the Rationale.

This SAE Recommended Practice identifies the necessary dimensional characteristics of filter-base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters. This SAE document is basically equivalent to the ISO 6415-1981 and ISO 7654-1983 except for differences detailed in the Rationale.

This SAE Recommended Practice identifies the necessary dimensional characteristics of filter base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters.

This SAE Recommended Practice identifies the necessary dimensional characteristics of filter-base mounting configurations to accept the more commonly used lubricating oil and diesel fuel spin-on filters. This SAE document is basically equivalent to the ISO 6415-1981 and ISO 7654-1983 except for differences detailed in the Rationale.

This standard establishes a multipass filtration performance test with continuous contaminant injection for lubricating oil filter elements. It also includes a procedure for determining the contaminant capacity, particulate removal characteristics, and pressure loss. It also includes a test currently applicable to lubricating oil filter elements which exhibit a 10 μm filtration ratio of less than 75 and a rated flow between 4 and 600 L/min. This standard provides a test procedure which yields reproducible test data for evaluating the filtration performance of a lubricating oil filter element.

To determine the ability of a fuel/water separator to separate emulsified or finely dispersed water from fuels.

To determine the ability of a fuel/water separator to separate emulsified or finely dispersed water from fuels.

To determine the ability of a fuel/water separator to separate emulsified or finely dispersed water from fuels.

To determine the ability of a fuel/water separator to separate emulsified or finely dispersed water from fuels. This test method is applicable for biodiesel fuel.

To determine the ability of a fuel/water separator to separate emulsified or finely dispersed water from fuels.

To determine the ability of a fuel-water separator to separate emulsified or finely dispersed water from fuels.

This SAE Standard is intended for all sizes of fuel filters, so a variety of test stands may be required depending upon flow rate. The low contamination level, downstream clean-up filter, and short duration of the test, ensures that the particle retention ability of the filter is measured in a single pass as no appreciable loading or regression will occur.