Refine Your Search

Topic

Search Results

Standard

Aerospace First Article Inspection Requirements

2000-06-01
HISTORICAL
AS9012
This SAE Aerospace Standard (AS) establishes documentation requirements for the First Article Inspection (FAI). The purpose of the First Article Inspection is to provide objective evidence the all engineering design and specification requirements are properly understood, accounted for, verified, and documented. The purpose of this document is to provide a consistent documentation requirement for aerospace components First Article Inspection. It is the intent that the documentation generated will be a quality record of the supplier and customer for review of accountability and planning, for performing periodic surveillance and audits to verify conformance, for evaluating root cause and corrective action for any non-conformance, and for problem ionvestigations.
Standard

Americas Aerospace Quality Group (AAQG) Requirements for Aerospace Quality Management System Certification/Registrations Programs

2006-07-06
HISTORICAL
AS9014
These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. This AS provides the approval process for Auditor Authentication Bodies (AAB), training course providers, trainers and auditors who meet the requirements of AIR5493 and outlines the America’s sector specific process to implement AS9104. This document is created to be in conformance with AS9104.
Standard

Aerospace First Article Inspection Requirements

2003-04-17
CURRENT
AS9012A
This SAE Aerospace Standard (AS) establishes documentation requirements for the First Article Inspection (FAI). The purpose of the First Article Inspection is to provide objective evidence the all engineering design and specification requirements are properly understood, accounted for, verified, and documented. The purpose of this document is to provide a consistent documentation requirement for aerospace components First Article Inspection. It is the intent that the documentation generated will be a quality record of the supplier and customer for review of accountability and planning, for performing periodic surveillance and audits to verify conformance, for evaluating root cause and corrective action for any non-conformance, and for problem ionvestigations.
Standard

Americas Aerospace Quality Group (AAQG) Requirements for Aerospace Quality Management System Certification/Registrations Programs

2015-06-12
CURRENT
AS9014A
These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. This AS provides the approval process for Auditor Authentication Bodies (AAB), training course providers, trainers and auditors who meet the requirements of AIR5493 and outlines the America’s sector specific process to implement AS9104. This document is created to be in conformance with AS9104.
Standard

Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods

2005-10-27
HISTORICAL
ARP9013/1
The purpose of this SAE Aerospace Recommended Practice (ARP) is to ensure conformance for each product characteristic being verified in a lot, without maintaining information from previous lots. ARP9013/1 specifies a product acceptance system for isolated lots. For example, isolated lot sampling avoids keeping track of the normal, tightened, and reduced levels of sampling formerly used in MIL-STD-105 and currently used in ANSI/ASQC Z1.4. Because those switching rules provided significant long-term protection for product quality, these isolated lot tables replace that protection in other ways.
Standard

Direct Ship - Recommended Practices for Aerospace Companies

2002-04-08
HISTORICAL
ARP9004
Limited to the Aerospace industry where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process the approved manufacturer is responsible for assurance that the article conforms to Type Design information.
Standard

Aerospace Contract Clauses

2006-01-21
HISTORICAL
ARP9009
This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: a needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and b needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.
Standard

Aerospace Contract Clauses

2017-06-21
CURRENT
ARP9009A
This SAE Aerospace Recommended Practice (ARP) specifies for quality requirements that are additive to a procurement document or contract, where an organization: a needs to provide additional guidance for suppliers and other organizations in the delivery of products, goods and services in accordance with stated quality demands, and b needs to provide information in addition or in absence of existing quality system requirements to provide the assurance of conformity to customer and applicable regulatory requirements. NOTE: In this ARP, the term ‘product’ applies only to the product intended for, or required by, a customer.
Standard

Statistical Product Acceptance Requirements

2005-10-27
HISTORICAL
ARP9013
This SAE Aerospace Recommended Practice (ARP) establishes the general requirements when implementing any of the statistical product acceptance methods as defined in ARP9013/1, ARP9013/2, ARP9013/3, and ARP9013/4. This recommended practice also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of AS9100 plus requirements for retrievability, safety/critical characteristics, quality parameters, and that these parameters protect the customer. This recommended practice is to be used in conjunction with the variety of sampling strategies, statistical techniques, and process control methods of the ARP9013/1 through ARP9013/4 recommended practices as chosen by the organization.
Standard

Aerospace Operator Self-Verification Programs

2004-03-24
HISTORICAL
ARP9062
Operator Self-Verification can apply to a variety of processes. The primary focus is on traditional manufacturing operations, but applications can be made wherever traditional inspection methods are employed. The practices recommended in this document are intended to identify the basic elements for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve overall efficiency and product quality to processes considered mature, as judged by the organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management system standard requirements.
Standard

Requirements for Registration of Quality Systems to AS9000 or AS9100

2000-03-01
HISTORICAL
AIR5359
This procedure shall be applied by ANSI-RAB or other Accreditation Bodies to registrars that meet the criteria of 5.2 of this document, when specified by an aerospace company requiring assessment and/or registration of their quality system to the requirements of this procedure. The quality system standard shall be AS9000 or AS9100 and shall be applied to the supplier's complete Quality System that covers aerospace products.
Standard

Requirements for Certification/Registration of Aerospace Quality Management Systems

2008-01-16
CURRENT
AIR5359C
The requirements defined in this AIR are applicable to Accreditation Bodies (ABs), Certification/Registration Bodies (CRBs), and Original Equipment Manufacturers (OEMs), during assessment and/or certification/registration to the applicable quality management system standard to meet industry accepted practices.
Standard

Requirements for Registration of Quality Systems to AS9000 or AS9100

2001-07-01
HISTORICAL
AIR5359A
These requirements are applicable to Accreditation Bodies, Registrars and OEMs, when specified by an aerospace company requiring assessment and/or registration of their quality system in accordance with the requirements of this document. The quality management system standard shall be AS9000 or AS9100 and shall be applied to the organization’s complete Quality System that covers aerospace products.
Standard

Aerospace Operator Self-Verification Programs

2005-05-10
HISTORICAL
ARP9162
The focus of Operator Self-Verification is on traditional manufacturing operations, and applications can be made wherever traditional inspection is employed. The practices recommended in this document are intended to identify the basic elements and provide a “guideline” for structuring Operator Self-Verification programs within the aerospace industry; applicable to producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines and composite components. Operator Self-Verification programs are applied to improve the overall efficiency and product quality of processes considered mature, as judged by the implementing organization. Operator Self-Verification programs are not stand-alone processes, but augment existing quality management systems.
Standard

Direct Delivery Authorization Guidance for Aerospace Companies

2005-09-09
HISTORICAL
ARP9107
Limited to the Commercial Aerospace industry where a request is made for a Production Organization (PO) to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to Approved Design and Airworthiness Data. The PO is responsible to provide airworthiness release documentation.
Standard

Inspection and Test Quality System

2001-10-01
HISTORICAL
AS9003
This document contains the minimum requirements for supplier Inspection and Test Quality System. It is emphasized that the quality system requirements specified in this standard are complementary (not alternative) to the contractual and applicable law and regulatory requirements.
Standard

Qualification Procedure for Aerospace Standard Parts

2002-07-16
HISTORICAL
AS9133
This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to AS/EN/SJAC9100. These standards apply when called out in the aerospace standard part standard.
Standard

Direct Ship Guidance for Aerospace Companies

2019-04-05
WIP
ARP9114B
This document provides guidance to approved manufacturers, their suppliers, and customers when an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s purchase document directly to a customer, commonly known as “Direct Ship”.
X