Search Results

A microwave powered solid waste stabilization and water recovery prototype was delivered to Ames Research Center through an SBIR Phase II contract awarded to Umpqua Research Company. The system uses a container capable of holding 5.7 dm3 volume of waste. The microwave power can be varied to operate either at full power (130 W) or in a variable mode from 0% and 100%. Experiments were conducted with different types of wastes (wet cloth, simulated feces/diarrheal wastes, wet trash and brine) at different levels of moisture content and dried under varying microwave power supply. This paper presents the experimental data. The results provide valuable insight into the different operation modes under which the prototype can be used to recover water from the wastes in a space environment. Further investigations and testing of the prototype are recommended.

In February 2004 NASA released “The Vision for Space Exploration.” The goals outlined in this document include extending the human presence in the solar system, culminating in the exploration of Mars. A key requirement for this effort is to identify a safe and effective method to process waste. Methods currently under consideration include incineration, microbial oxidation, pyrolysis, drying, and compaction. Although each has advantages, no single method has yet been developed that is safe, recovers valuable resources including oxygen and water, and has low energy and space requirements. Thus, the objective of this work was to develop a low temperature oxidation process to convert waste cleanly and rapidly to carbon dioxide and water. TDA and NASA Ames Research Center have developed a pilot scale low temperature ozone oxidation system to convert organic waste to CO2 and H2O.

Magnetically Assisted Gasification (MAG) is a relatively new concept for the destruction of solid wastes aboard spacecraft, lunar and planetary habitations. Three sequential steps are used to convert the organic constituents of waste materials into useful gases: filtration, gasification, and ash removal. In the filtration step, an aqueous suspension of comminuted waste is separated and concentrated using a magnetically consolidated depth filter composed of granular ferromagnetic media. Once the filter is fully loaded, the entrapped solids are thermochemically gasified via a variety of mechanisms including pyrolysis, isomerization, and oxidation reactions. Finally, the inorganic ash residue is removed from the magnetic media by fluidization and trapped downstream by filtration. Importantly, for each of these steps, the degree of consolidation or fluidization of the granular ferromagnetic media is controlled using magnetic forces.

Several solid waste management (SWM) systems currently under development for spacecraft deployment result in the production of a variety of toxic gaseous contaminants. Examples include the Plastic Melt Waste Compactor (PMWC) at NASA - Ames Research Center1, the Oxidation/Pyrolysis system at Advanced Fuel Research2, and the Microwave Powered Solid Waste Stabilization and Water Recovery (MWSWS&WR) System at UMPQUA Research Company (URC). The current International Space Station (ISS) airborne contaminant removal system, the Trace Contaminant Control Subassembly (TCCS), is designed to efficiently process nominal airborne contaminants in spacecraft cabin air. However, the TCCS has no capability to periodically process the highly concentrated toxic vapors of variable composition, which are generated during solid waste processing, without significant modifications.

For Supercritical Water Oxidation (SCWO), particle size is a key factor effecting requirements for feed preparation, slurry concentration and pumping, rate of reaction, and reactor size. To address these issues, an experimental research program was undertaken to evaluate the effect of particle size on the reaction kinetics in SCWO of solid particulates (wheat straw and cellulose particles in this case). The experiments also included evaluation of the effects of temperature, pressure, and agitation. Some corrosion data were obtained. A two-step reaction mechanism was revealed. Empirically based mathematical relationships were developed that can be used for SCWO system design.

A variety of techniques, including supercritical water oxidation, fluidized bed combustion, and microwave incineration have been applied to the destruction of solid wastes produced in regenerative life support systems supporting long duration manned missions. Among potential problems which still deserve attention are the need for operation in a variety of gravitational environments, and the requirement for improved methods of presenting concentrated solids to the reactor. Significant improvements in these areas are made possible through employment of the magnetically assisted gasification process. In this paper, magnetic methods are described for manipulating the degree of consolidation or fluidization of granular ferromagnetic media, for application in a gravity independent three step solid waste destruction process.

Since the mid 1980s, NASA has developed advanced waste management technologies that collect and process waste. These technologies include incineration, hydrothermal oxidation, pyrolysis, electrochemical oxidation, activated carbon production, brine dewatering, slurry bioreactor oxidation, composting, NOx control, compaction, and waste collection. Some of these technologies recover resources such as water, oxygen, nitrogen, carbon dioxide, carbon, fuels, and nutrients. Other technologies such as the Waste Collection System (WCS - the commode) collect waste for storage or processing. The need for waste processing varies greatly depending upon the mission scenario. This paper reviews the waste management technology development activities conducted by NASA since the mid 1980s and explores the drivers that determine the application of these technologies to future missions.

In February 2004 NASA released “The Vision for Space Exploration.” The goals outlined in this document include extending the human presence in the solar system, culminating in the exploration of Mars. A key requirement for this effort is to identify a safe and effective method to process waste. Methods currently under consideration include incineration, microbial oxidation, pyrolysis, drying, and compaction. Although each has advantages, no single method has yet been developed that is safe, recovers valuable resources including oxygen and water, and has low energy and space requirements. Thus, the objective of this work is to develop a low temperature oxidation process to convert waste cleanly and rapidly to carbon dioxide and water. Previously, TDA Research, Inc. demonstrated the potential of a low temperature dry oxidation process using ozone in a small laboratory reactor.