Search Results

The importance of including turbocharger dynamics in diesel engine models are studied, especially when optimization techniques are to be used to derive the optimal controls. This is done for two applications of diesel engines where in the first application, a diesel engine in wheel loader powertrain interacts with other subsystems to perform a loading operation and engine speed is dictated by the wheel speed, while in the second application, the engine operates in a diesel-electric powertrain as a separate system and the engine speed remains a free variable. In both applications, mean value engine models of different complexities are used while the rest of system components are modeled with the aim of control study. Optimal control problems are formulated, solved, and results are analyzed for various engine loading scenarios in the two applications with and without turbocharger dynamics.

The combustion process has a high impact on the engine efficiency, and in the search for efficient engines it is of interest to study the combustion. Optimization and optimal control theory is used to compute the most efficient combustion profiles for single zone model with heat transfer and crevice effects. A model is first developed and tuned to experimental data, the model is a modification of the well known Gatowski et al.-model [1]. This model is selected since it gives a very good description of the in-cylinder pressure, and thus the produced work, and achieves this with a low computational complexity. This enables an efficient search method that can maximize the work to be developed. First, smooth combustion profiles are studied where the combustion is modeled using the Vibe function, and parametric optimization is used to search for the optimal profile.

The work extends a methodology, for searching for optimal heat release profiles, by adding complex constraints on states. To find the optimum heat release profile a methodology, that uses available theory and methods, was developed that enables the use of state of the art optimal control software to find the optimum combustion trace for a model. The methodology is here extended to include constraints and the method is then applied to study how sensitive the solution is to different effects such as heat transfer, crevice flow, maximum rate of pressure rise, maximum pressure, knock and NO generation. The Gatowski single zone model is extended to a pseudo two zone model, to get an unburned zone that is used to describe the knocking and a burned zone for NO generation. A modification of the extended Zeldovich mechanism that makes it continuously differentiable, is used for NO generation.

Green zones are challenging problems for the thermal management systems of hybrid vehicles. This is because within the green zone the engine is turned off, and the only way to keep the aftertreatment system warm is lost. This means that there is a risk of leaving the green zone with a cold and ineffective aftertreatment system, resulting in high emissions. A thermal management strategy that heats the aftertreatment system prior to turning off the engine, in an optimal way, to reduce the NOx emissions when the engine is restarted, is developed. The strategy is also used to evaluate under what conditions pre-heating is a suitable strategy, by evaluating the performance in simulations using a model of a heavy-duty diesel powertrain and scenario designed for this purpose.

With stricter emission legislations and customer demands on low fuel consumption, good control strategies are necessary. This may involve control of variables that are hard, or even impossible, to measure with real physical sensors. By applying estimators or observers, these variables can be made available. The quality of a real sensor is determined by e.g. accuracy, drift and aging, but assessing the quality of an estimator is a more subtle task. An estimator is the result of a design work and hence, connected to factors like application, model, control error and robustness. The air mass-flow in a diesel engine is a very important quantity that has a direct impact on many control and diagnosis functions. The quality of the air mass-flow sensor in a diesel engine is analyzed with respect to day-to-day variations, aging, and differences in engine configurations. The investigation highlights the necessity of continuous monitoring and adaption of the air mass-flow.

Downsizing and turbocharging is a proven technology for fuel consumption reduction in vehicles. To further improve the performance, electrified components in the turbocharger arrangements have been proposed, and investigations have shown acceleration improvements, emission reductions, and further fuel conversion efficiency benefits. Simulation tools play an important role in the design process as the interplay between component selection, control strategy, system properties and constraints is very complex. Evaluations are performed with respect to BSFC map, fuel consumption in a drive cycle, acceleration performance, as well as many other aspects. A component-based engine and vehicle model is developed and evaluated to facilitate the process of assessing and optimizing the performance of e.g. engine, charging system, and electrical machine components. Considerations of the execution time and model fidelity have resulted in a choice of models in the mean value engine model family.

In diesel engines with EGR and VGT, the gas flow dynamics has significant nonlinear effects. This is shown by analyzing DC-gains in different operating points showing that these gains have large variations. To handle these nonlinear effects, a nonlinear state dependent input transformation is investigated. This input transformation is achieved through inversion of the models for EGR-flow and turbine flow. It is shown that the input transformation handles the nonlinear effects and decreases the variations in DC-gains substantially. The input transformation is combined with a new control structure that has a pumping work minimization feature and consists of PID controllers and min/max-selectors for coordinated control of EGR-fraction and oxygen/fuel ratio. The EGR flow and the exhaust manifold pressure are chosen as feedback variables in this structure. Further, the set-points for EGR-fraction and oxygen/fuel ratio are transformed to set-points for the feedback variables.

Heat release analysis by using a pressure sensor signal is a well recognized technique for evaluation of the combustion event, and also for combustion diagnostics. The analysis includes tuning of several parameters in order to accurately explain measured data. This work presents and investigates a systematic method for estimating parameters in heat release models and minimizing the arbitrary choices. In order for the procedure to be systematic there are also the requirements on the model, that it includes no inherent ambiguities, like over-parameterization with respect to the parameters and to the information contained in the measurements. The fundamental question is which parameters, in the heat release model, that can be identified by using only cylinder pressure data. The parameter estimation is based on established techniques, that constructs a predictor for the model and then minimizes a least-squares objective function of the prediction error.

In modern Diesel engines Exhaust Gas Recirculation (EGR) and Variable Geometry Turbochargers (VGT) have been introduced to meet the new emission requirements. A control structure that coordinates and handles emission limits and low fuel consumption has been developed. This controller has a set of PID controllers with parameters that need to be tuned. To be able to achieve good performance, an optimization based tuning method is developed and tested. In the optimization the control objectives are captured by a cost function. To aid the tuning a systematic method has been developed for selecting representative and significant transients that excite different modes in the controller. The performance is evaluated on the European Transient Cycle. It is demonstrated how weighting factors in the cost function influence control behavior, and that the proposed tuning method gives a significant improvement in control performance compared to standardized tuning methods for PID controllers.

A method for determining turbocharger performance on installations in an engine test bench is developed and investigated. The focus is on the mapping of compressor performance but some attention is also given to the turbine mapping. An analysis of the limits that an engine installation imposes on the reachable points in the compressor map is performed, in particular it shows what corrected flows and pressure ratios can be reached and what these limitations depend on. To be able to span over a larger region of the corrected flow a throttle before the compressor is suggested and this is also verified in the test bench. Turbocharger mapping is a time consuming process and there is a need for a systematic process that can be executed automatically. An engine and test cell control structure that can be used to automate and monitor the measurements by controlling the system to the desired operating points is also proposed.

The objective is to investigate models of the specific heat ratio for the single-zone heat release model, and find a model accurate enough to introduce a modeling error less than or in the order of the cylinder pressure measurement noise, while keeping the computational complexity at a minimum. Based on assumptions of frozen mixture for the unburned mixture and chemical equilibrium for the burned mixture, the specific heat ratio is calculated using a full equilibrium program for an unburned and a burned air-fuel mixture, and compared to already existing and newly proposed approximative models of γ. A two-zone mean temperature model, Matekunas pressure ratio management and the Vibe function are used to parameterize the mass fraction burned. The mass fraction burned is used to interpolate the specific heats for the unburned and burned mixture, and then form the specific heat ratio, which renders a small enough modeling error in γ.

It is important to determine the phasing of a measured cylinder pressure trace and crank angle with high accuracy. The reason is that erroneous determination of the position of TDC is a major error source when calculating properties such as heat release etc. A common way to determine the TDC position is to study motored cycles. Heat transfer makes the task more complicated, since it shifts the position of the maximum pressure away from TDC. In this paper a new method for determining the TDC position is proposed that does not require any additional sensors other than a cylinder pressure sensor and an incremental encoder. The idea is to find a point that the cylinder pressure from a motored cycle is symmetric around, since the volume is close to symmetric on either side of TDC. The new method and four published methods are tested and evaluated. Cylinder pressure data used for comparison are from simulations of a SAAB Variable Compression engine.

A program package, that calculates chemical equilibrium and thermodynamic properties of reactants and products of a combustion reaction between fuel and air, has been developed and validated. The package consists of the following four parts: 1) A program for calculating chemical equilibrium. 2) A database that contains thermochemical information about the molecules, which comes from the GRI-Mech tables. 3) A GUI that allows the user to easily select fuels, fuel/air ratio for the reaction, and combustion products. 4) A set of functions designed to access the thermochemical database and the chemical equilibrium programs. Results are validated against both the NASA equilibrium program (Gordon and McBride, 1994) and the program developed by Olikara and Borman (1975). It is shown that the new method gives results identical to those well recognized Fortran programs.

Mean value cylinder air charge (CAC) estimation models for control and diagnosis are investigated on turbocharged SI-engines. Two topics are studied; Firstly CAC changes due to fuel enrichment and secondly CAC sensitivity to exhaust manifold pressure changes. The objective is to find a CAC model suitable for control and diagnosis. Measurements show that CAC models based on volumetric efficiency gives up to 10% error during fuel enrichment. The error is caused by the cooling effect that the fuel has as it evaporates and thus increases the charge density. To better describe the CAC during fuel enrichment a simple one parameter model is proposed which reduces the CAC estimation error on experimental data from 10% to 3%. With active wastegate control, the pressure changes in the exhaust manifold influences the CAC. The magnitude of this influence is investigated using sensitivity analysis on an exhaust manifold pressure dependent CAC-model.

Observers for air mass flow to the cylinder is studied on a turbocharged SI-engine with wastegate. A position change of the wastegate influences the residual gas mass and causes the volumetric efficiency to change, which produces a transient in the air mass flow to the cylinder. Two standard methods of estimating air-to-cylinder are investigated. A new nonlinear air-to-cylinder observer is suggested with two states: one for intake manifold pressure and one for the offset in in-cylinder air mass compared to expected through the volumetric efficiency. The observers are validated on intake manifold pressure data from a turbocharged spark ignited production engine with wastegate.

Exhaust temperatures are important for turbine and catalyst performance. A set of exhaust temperature models suitable for turbo matching as well as design and analysis of engine control systems are developed and investigated. The models are lumped parameter heat transfer models, that fall within the category of mean value engine models. The model is developed for describing exit temperatures from the exhaust manifold and temperature drops in pipe sections in the exhaust system. The components used to model the exhaust temperature are: engine out temperature, temperature drop in a straight pipe, and a set of heat transfer modes. The model is validated using data from three different engines. It is shown that, for a spark ignited engine operating at MBT and stoichiometric conditions, it is sufficient to model the engine out temperature as a linear function of mass flow. Recommendations for tuning the model are also given.

An analytic model for cylinder pressures in spark ignited engines is developed and validated. The main result is a model expressed in closed form that describe the in-cylinder pressure development of an SI engine. The method is based on a parameterization of the ideal Otto cycle and takes variations in spark advance and air-to-fuel ratio into account. The model consists of a set of tuning parameters that all have a physical meaning. Experimental validation on two engines show that it is possible to describe the in-cylinder pressure of a spark ignited combustion engine operating close to stoichiometric conditions, as a function of crank angle, manifold pressure, manifold temperature and spark timing.

Three methods for estimating the compression from measured cylinder pressure traces are described and evaluated for both motored and fired cycles against simulated and measured cylinder pressure. The first two rely upon a model of polytropic compression, and it is shown that they give a good estimate of the compression ratio for simulated cycles for low compression ratios. For high compression ratios, these simple models lack the information about heat transfer. The third method includes a standard heat transfer and crevice effect model, together with a heat release model and is able to estimate the compression ratio more accurately.

The aim of this paper is to compile the state of the art of engine control and develop scenarios for improvements in a number of applications of engine control where the pace of technology change is at its most marked. The first application is control of downsized engines with enhancement of combustion using direct injection, variable valve actuation and turbo charging. The second application is electrification of the powertrain with its impact on engine control. Various architectures are explored such as micro, mild, full hybrid and range extenders. The third application is exhaust gas after-treatment, with a focus on the trade-off between engine and after-treatment control. The fourth application is implementation of powertrain control systems, hardware, software, methods, and tools. The paper summarizes several examples where the performance depends on the availability of control systems for automotive applications.

Today’s need for fuel efficient vehicles, together with increasing engine component complexity, makes optimal control a valuable tool in the process of finding the most fuel efficient control strategies. To efficiently calculate the solution to optimal control problems a gradient based optimization technique is desirable, making continuously differentiable models preferable. Many existing control-oriented Diesel engine models do not fully posses this property, often due to signal saturations or discrete conditions. This paper offers a continuously differentiable, mean value engine model, of a heavy-duty diesel engine equipped with VGT and EGR, suitable for optimal control purposes. The model is developed from an existing, validated, engine model, but adapted to be continuously differentiable and therefore tailored for usage in an optimal control environment. The changes due to the conversion are quantified and presented.