Search Results

The effect of cavitation plays a fundamental role in the hydraulic components design and the capability of predicting its causes and characteristics is fundamental for the optimization of fluid systems. In this paper, a multidimensional CFD approach is used to analyze the cavitating phenomena typical of hydraulic components using water as operating fluid. An open source fluid-dynamics code is used and the original cavitation model (based on a barotropic equation of state and homogeneous equilibrium assumption) is extended in order to account also for gases dissolved in the liquid medium. The effect of air dissolution into liquid water is modeled by introducing the Henry law for the equilibrium condition, and the time dependence of solubility is calculated on a Bunsen Coefficient basis. Furthermore, a simplified approach to turbulence modeling for compressible flows is coupled to the cavitation model and implemented into the CFD code.

This paper presents a multidimensional approach to the hydraulic components design by means of an open-source fluid dynamics code. A preliminary study of a basic geometry was carried out by simulating the efflux of an incompressible fluid through circular pipes. Both laminar and turbulent conditions were analyzed and the influence of the grid resolution and modeling settings were investigated. A qualitative description of the internal flow-field distribution, and a quantitative comparison of pressure and velocity profiles along the pipe axis were used to asses the multidimensional open-source code capabilities. Moreover the results were compared with the experimental measurements available in literature and with the theoretical trends which can be found in well-known literature fundamentals (Hagen-Poiseuille theory and Nikuradse interpolation). Further comparison was performed by using a commercial CFD code.

Flexibility in running with different fuel is becoming an important issue in the Internal Combustion Engine design due to the increasingly wider use of alternative fuels. The injection systems must deal with fuels having different properties and effects on engine behavior and take proper adjustments in the control strategy. Particularly the transient during which one fuel is being replaced by the second one is a critical point of the injection system operation, and its capability of recognizing the fuel mixture currently available is a fundamental matter in the engine control development. This paper focuses on the multidimensional CFD analysis of a Common Rail type multi-fuel injection system accumulator during the gasoline - ethanol shift. An open source computational fluid dynamics code was used in the modeling.

In this paper, an orifice-based lumped parameter model has been developed and tailored to predict the feeding performances of a single stage, inwardly opening, PWM controlled gas injector for automotive applications. In particular, simplifying the description of injector relevant sections, and adopting a “semi-perfect” approach to depict the gas properties dependency on pressure and temperature, the sub-sonic efflux through the injector metering section is studied involving both an isentropic and a polytropic expansion. Then, considering dry air as fluid medium, the injector feeding characteristics variations with the duty cycle, with the feeding pressure and with temperature are highlighted.

The paper focuses on the mixing process of different fuels in a multi-fuel low pressure common rail injection system for a four stroke SI engine. The study is devoted to the prediction of the fuel mixture delivered by the injectors during a transient in which gasoline is being replaced by ethanol or a gasoline/ethanol blend. An integrated approach of different numerical tools is used to model the rail dynamic behavior under actual operating conditions. First, the 1D model of the injection system is constructed and the time varying conditions at the accumulator inlet and at the injectors' boundaries are assessed. The second step of the study is centered on the CFD analysis of the mixing process within the rail. The effects of the different engine operations on the fuels mixing are investigated and the injected fuel distribution among the cylinders is calculated. An open source computational fluid dynamics code is used in the simulations.

In the present automotive research, increasing efforts are being directed to improve the overall organic efficiency, which, inter alia, means to improve the operational behavior of the auxiliary organs. This paper reports an experimental approach for the determination and analysis of the pressure distribution in a variable displacement vane pump for high speed internal combustion engine lubrication. More in details, an actual application is presented for a seven-blades variable displacement vane pump equipped with a hydraulic geometry variation system. This unit is characterized by a high performance, in terms of rotational speed, delivery pressure and displacement variation. The experimental layout and some relevant facilities are described. An extended test campaign was performed on the pump to characterize its operational behavior.

The internal flow field of a low pressure common rail type multi-fuel injector is analyzed by means of numerical simulation and particular attention is devoted to the cavitation and aeration phenomena when using different fuel mixtures. The fluid-dynamics open source OpenFOAM code is used; and the original cavitation model (based on a barotropic equation of state and homogeneous equilibrium assumption) is extended in order to account also for gases dissolved in the liquid medium. The effect of air dissolution into liquid is determined by introducing the Henry law for the equilibrium condition and the time dependence of solubility is calculated on a Bunsen Coefficient basis. A preliminary study of test cases available in literature is carried out to address the model predictive capabilities and grid dependency. The calculated pressure distribution and discharge coefficient for different nozzle shapes and operating conditions are compared with the referenced experimental measurements.

This paper studies the influence of the discharge chamber geometrical parameters on the steady-state characteristics behavior of a conical seat valve having compensating profile. More in details, starting from the analysis of the experimental behavior of an actual valve showing inefficient characteristic curves, the metering openings leading to the transition from under to over compensation are individuated. Then, a 3D CFD steady-state, incompressible and isothermal analysis is involved, mainly to evidence the valve discharge coefficient and flow-forces variations with operating conditions. After, two alternative valve configurations, presenting a low pressure region designed to optimize the flow-forces compensation, are characterized through the 3D CFD analysis.

The paper investigates, by means of a 3D, steady-state, incompressible and isothermal CFD analysis, the influence of the notch shape and number on proportional directional control valves metering edge characteristics. The numerical activity is firstly performed for a sharp metering edge, considered as reference case. Then, different configurations of notched metering edges are considered, coming from the adoption of two notch geometrical shapes largely used in proportional directional control valves actual design, and from a symmetrical displacement of two, three and four notches on the spool periphery. For all the cases considered, the qualitative analysis of the internal flow field is performed in order to highlight the fluid efflux main characteristics.

In this paper a lumped parameters numerical model is reviewed to study the meshing process of external gear pumps and motors, with the aim of highlighting the influence of some geometrical design parameters and operating conditions on inter-teeth volumes pressures. The inter-teeth space is modeled adopting a two-volume approach, properly tailored both for the pump and for the motor units behavior description. In both cases, the communications between the interconnected inter-teeth volumes and the high and low pressure ports are sketched as variable equivalent turbulent restrictors; flow areas have been determined as functions of the gears and of the meshing grooves main design parameters. The inter-teeth pressures, and the leakage flows, are calculated solving the incompressible and isothermal continuity equation, contemporarily applied to both volumes and properly combined with the classical turbulent orifice equation.

In this paper some design aspects related to external gear pumps balancing surfaces are studied, and some useful guidelines for designing bearing blocks balancing surfaces are suggested. In order to study bearing blocks axial balance, a numerical procedure for the determination of the pressure distribution inside the clearance bounded by gears sides and bearing blocks internal surfaces is firstly presented and applied. After, the influence of bearing blocks geometry and pump operating conditions on the widening thrust is highlighted, considering both constant and variable lateral clearance heights. Then, the computations are performed to evaluate the widening thrust variation as a function of bearing blocks relative tilt with respect to gears lateral sides, and both positive and negative bearing blocks tilts are evidenced and discussed.

The paper deals with the simulation and the experimental verification of the dynamic behaviour of a linear actuator equipped with different configurations of mechanical cushion. A numerical model, developed and tailored to describe the influence of different modulation of the discharged flow-rate (and of the correspondent discharging orifice design) on the cushioning characteristics variation is firstly introduced. Then, with respect to the case of the cylindrical cushioning engagement, both the reliability and the limits of the numerical approach are highlighted through a numerical vs. experimental comparison, involving the piston velocity and the cylinder chambers pressure. After, with the aim of highlighting the effect of mechanical cushions design on a two effect linear actuator dynamic performances, the characteristics modulation of four alternative cushioning systems are determined and deeply analyzed.

This paper deals with the analysis of the interaction between solid contamination and internal geometry in hydraulic conical and spherical poppet valves, performed through a non-dimensional, axis-symmetric CFD analysis of their internal flow. The information coming from the flow field solution is used to identify regions having higher probability to be impacted by particles dragged by the fluid, and to estimate the erosion potential of solid particles having different size. The value of the kinetic energy of particles approaching the walls of the geometric domain is used to estimate the amount of material potentially eroded by impacting particles, and to provide a potential correlation between ISO 4406 and NAS 1638 solid contamination level classification. The long-term target is a numerical estimation of service life in hydraulic components.