Refine Your Search

Date

Date

Topic

Topic

Tests and Testing Pressure Road Illumination Devices Standards Committee Exhaust systems

Search Results

Viewing 1 to 20 of 61
123Next >Last >>
Sort by published
Standard

Full Adaptive Forward Lighting Systems
2020-03-12
CURRENT
J2838_202003
This SAE standard provides test procedures, performance requirements, design guidelines and installation guidelines for full adaptive forward lighting systems (AFS).
Standard

Full Adaptive Forward Lighting Systems
2013-03-05
HISTORICAL
J2838_201303
This SAE standard provides test procedures, performance requirements, design guidelines and installation guidelines for full adaptive forward lighting systems (AFS).
Standard

AUXILIARY LOW BEAM LAMPS
1995-03-01
HISTORICAL
J582_199503
This SAE Recommended Practice provides general design and performance requirements, test procedures, and installation guidelines for auxiliary low beam lamps.
Standard

AUXILIARY LOW BEAM LAMP
1973-01-01
HISTORICAL
J582A_197301
This standard provides design requirements and test methods for an auxiliary low beam lamp.
Standard

AUXILIARY LOW BEAM LAMPS
1984-09-01
HISTORICAL
J582_198409
This SAE Technical Report provides general design and performance requirements, test procedures, and installation guidelines for auxiliary low beam lamps.
Standard

Distributed Lighting Systems (DLS)
2011-02-24
CURRENT
J2282_201102
This SAE Recommended Practice applies to motor vehicle Distributed Lighting Systems (DLS) which use light generated by remote sources. It provides test methods, requirements, and guidelines applicable to these systems. This document is intended to be a guide to standard practice and is subject to change dependent upon additional experience and technical advances. This document covers Headlamp, Fog lamp, Auxiliary lamp, plus Signal and Marking lamp functions.
Standard

Distributed Lighting Systems (DLS)
2007-08-21
HISTORICAL
J2282_200708
This SAE Recommended Practice applies to motor vehicle Distributed Lighting Systems (DLS) which use light generated by remote sources. It provides test methods, requirements, and guidelines applicable to these systems. This document is intended to be a guide to standard practice and is subject to change dependent upon additional experience and technical advances. This document covers Headlamp, Fog lamp, Auxiliary lamp, plus Signal and Marking lamp functions.
Standard

REPLACEABLE BULBS FOR HEADLAMPS
1988-11-01
HISTORICAL
J1496_198811
This technical report covers performance requirements, design requirements, and design guidelines for replaceable bulbs which may be used in headlamp applications.
Standard

Limited Adaptive Forward Lighting System
2017-05-19
CURRENT
J2591_201705
This SAE Recommended Practice applies to motor vehicle Forward Illumination Devices which incorporate limited adaptive beam pattern capabilities. This document is to be used in conjunction with other forward lighting standards and/or recommended practices which define the base beam procedures, requirements, and guidelines.
Standard

Limited Adaptive Forward Lighting System
2023-04-21
WIP
J2591
This SAE Recommended Practice applies to motor vehicle Forward Illumination Devices which incorporate limited adaptive beam pattern capabilities. This document is to be used in conjunction with other forward lighting standards and/or recommended practices which define the base beam procedures, requirements, and guidelines.
Standard

Adaptive Forward Lighting System
2008-11-06
HISTORICAL
J2591_200811
This SAE recommended practice applies to motor vehicle Forward Illumination Devices which incorporate adaptive beam pattern capabilities. This document is to be used in conjunction with other forward lighting standards and/or recommended practices which define the base beam procedures, requirements, and guidelines.
Standard

Headlamp Cleaners
2015-07-08
HISTORICAL
J2111_201507
This SAE Recommended Practice provides test procedures, performance requirements, and guidelines for cleaners intended for use on motor vehicles.
Standard

Headlamp Cleaners
2020-08-26
CURRENT
J2111_202008
This SAE Recommended Practice provides test procedures, performance requirements, and guidelines for cleaners intended for use on motor vehicles.
Standard

Headlamp Cleaners
2010-09-07
HISTORICAL
J2111_201009
This SAE Recommended Practice provides test procedures, performance requirements, and guidelines for cleaners intended for use on motor vehicles.
Standard

HEADLAMP AIMING DEVICE FOR MECHANICALLY AIMABLE SEALED BEAM HEADLAMP UNITS
1970-07-01
HISTORICAL
J602A_197007
This specification applies to the requirements of a device used to aim the mechanically aimable type of sealed beam headlamp units. The purpose of this specification is to provide a practical laboratory test procedure to determine whether the devices under test are capable of accurately positioning sealed beam headlamp units from their aiming pads and maintaining their accuracy in service within the tolerances designated in this specification.
Standard

HEADLAMP AIMING DEVICE FOR MECHANICALLY AIMABLE SEALED BEAM HEADLAMP UNITS
1973-09-01
HISTORICAL
J602B_197309
This specification applies to the requirements of a device used in the field and inspection stations to aim the mechanically aim-able type of sealed beam headlamp units. The purpose of this specification is to provide a laboratory test procedure to determine whether the devices under test are capable of accurately positioning sealed beam headlamp units from their aiming pads and maintaining their accuracy in service within the tolerances designated in this specification.
Standard

HEADLAMP AIMING DEVICE FOR MECHANICALLY AIMABLE SEALED BEAM HEADLAMP UNITS
1980-10-01
HISTORICAL
J602_198010
This specification applies to the requirements of a device used in the field and inspection stations to aim the mechanically aimable type of sealed beam hadelamp units. The purpose of this specification is to provide a laboratory test procedure to determine whether the devices under test are capable of accurately positioning sealed beam headlamp units from their aiming pads and maintaining their accuracy in service within the tolerances designated in this specification.
Standard

HEADLAMP AIMING DEVICE FOR MECHANICALLY AIMABLE SEALED BEAM HEADLAMP UNITS
1959-02-01
HISTORICAL
J602_195902
This specification applies to the requirements of a device used to aim the mechanically aimable type of sealed beam headlamp units. The purpose of this specification is to provide a practical laboratory test procedure to determine whether the devices under test are capable of accurately positioning sealed beam headlamp units from their aiming pads and maintaining their accuracy in service within the tolerances designated in this specification.
123Next >Last >>
X