Refine Your Search

Topic

Search Results

Standard

Mitigation for Loss-of-Control Accidents in Transport Airplanes

2010-08-12
WIP
ARP6149
Prevention of catastrophic upset mishaps cannot depend solely on recovery training. The proposed document should complement the training initiatives already in place. As a committee dealing with transport human factors and handling qualities, the output must consider both issues. At the same time, we cannot ignore initial and recurrent training issues and the widespread use of ground-based simulators. The plan would follow the approach taken in the 2003 S-7 white paper but would extend the scope to all forms of LOC, not just repeated rudder reversals. As with the white pa-per, the new document would have sections on transport handling qualities, flight control modes, aircraft displays, simulator requirements, and approval for IFR test evaluations as well as covering training issues. This new document would complement, not replace documents such as the Airplane Upset Recovery Training Aid.
Standard

Display Latency Evaluation Procedures

2012-12-03
WIP
ARP6238
This Aerospace Recommended Practice will identify the problem with latency in the pilot's instrument control of an aircraft. Recommended evaluation techniques to characterize control problems will be documented.
Standard

Flight Management Systems Review

1995-08-01
CURRENT
AIR4653
The information contained in this document is based on line experience with current systems. It should be used as a basis for ongoing research and development including the human factors aspects of future flight management systems and their interaction with the ATC environment.
Standard

INTEGRATION PROCEDURES FOR THE INTRODUCTION OF NEW SYSTEMS TO THE COCKPIT

1995-03-01
CURRENT
ARP4927
This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.
Standard

Flight Deck Layout and Facilities

1988-07-01
CURRENT
ARP4101
This document recommends criteria for the layout and for the design, installation, and operation of flight deck facilities for transport aircraft.
Standard

Flight Deck Layout and Facilities

2009-10-22
WIP
ARP4101A
This document recommends criteria for the layout and for the design, installation, and operation of flight deck facilities for transport aircraft.
Standard

Flight Deck Alerting System (FAS)

2017-01-27
WIP
ARP4102/4A
This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.
Standard

Flight Deck Alerting System (FAS)

1988-07-01
CURRENT
ARP4102/4
This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.
Standard

Design Objectives for Handling Qualities of Transport Aircraft

1988-07-01
CURRENT
ARP4104
This document specifies the requirements for the design objectives for handling qualities applicable to transport aircraft operating in the subsonic, transonic, and supersonic speed range. These objectives are not necessarily applicable to rotor or VTOL aircraft.
Standard

Design Objectives for Handling Qualities of Transport Aircraft

2011-08-23
WIP
ARP4104A
This document specifies the requirements for the design objectives for handling qualities applicable to transport aircraft operating in the subsonic, transonic, and supersonic speed range. These objectives are not necessarily applicable to rotor or VTOL aircraft.
Standard

Cockpit Visibility For Commercial Transport Aircraft

1952-08-15
HISTORICAL
AIR32
INTRODUCTION This report is intended to encourage more effort to be directed toWard improving the pilot's visibility from the cockpit of transport type aircraft wih the ultimate objective of improving safety. In the preparation of this Aeronautical Information Report, consideration Was given to pilot surveys made by the Civil Aeronautics Administration, studies made by manufacturers, and a review of the cockpit visibility provided in present day transport aircraf`t. It is recognized that a rigid specification is undesirable and may restrict development and utilization of initiative. For this reason the report is in general terms and offered as a guide.
Standard

Cockpit Visibility for Commercial Transport Aircraft

1964-03-01
CURRENT
AIR32B
INTRODUCTION This report is intended to encourage more effort to be directed toWard improving the pilot's visibility from the cockpit of transport type aircraft wih the ultimate objective of improving safety. In the preparation of this Aeronautical Information Report, consideration Was given to pilot surveys made by the Civil Aeronautics Administration, studies made by manufacturers, and a review of the cockpit visibility provided in present day transport aircraf`t. It is recognized that a rigid specification is undesirable and may restrict development and utilization of initiative. For this reason the report is in general terms and offered as a guide.
Standard

Cockpit Visibility For Commercial Transport Aircraft

1960-06-01
HISTORICAL
AIR32A
INTRODUCTION This report is intended to encourage more effort to be directed toWard improving the pilot's visibility from the cockpit of transport type aircraft wih the ultimate objective of improving safety. In the preparation of this Aeronautical Information Report, consideration Was given to pilot surveys made by the Civil Aeronautics Administration, studies made by manufacturers, and a review of the cockpit visibility provided in present day transport aircraf`t. It is recognized that a rigid specification is undesirable and may restrict development and utilization of initiative. For this reason the report is in general terms and offered as a guide.
Standard

Crew Safety Provision for Cargo Aircraft

1994-02-15
CURRENT
ARP1139
This document recommends provisions for crew safety and survival which are intended to apply to cargo aircraft and equipment. This ARP applies specifically to cargo aircraft regardless of means of propulsion or design speed regimes, including V/STOL types.
Standard

Flight Deck Environment

2002-12-16
CURRENT
ARP1411
This Aerospace Recommended Practice (ARP) is intended to specify the environmental conditions necessary to permit the operating crew of large civil transport aircraft to perform their required duties and functions in comfort, with minimum fatigue and no distraction. Environmental conditions should cause no short or long-term effects deleterious to health or physical well being, nor significantly impair ability to perform normal flight deck crew functions.
X