Search Results

Multibody Dynamics Simulation (MDS) studies are valuable in providing guidance in suspension systems design and reduce product development cost and time. These studies are used in various stages of suspension system design and development. In both concept study and detailed design the subsystem kinematics, dynamics and full vehicle dynamics studies are used. In this paper, four case studies for suspension system performance optimization using MDS studies are presented.

A method for predicting the propensity of a drum brake system to produce noise is presented. The method utilizes finite element models of the individual components of the drum brake system, which have been assembled into the system model of the brake assembly. An important step in this process is the tuning of the dynamic characteristics of the FEA model to ensure validation with experimental tests. Friction is the key element, which defines the behavior of the drum brake system. The system FEA model is assembled by coupling the lining and drum at the contact interface to simulate the friction interaction. This process produces an asymmetric stiffness matrix. A complex eigenvalue analysis identifies the system dynamic characteristics such as the frequency and damping for each vibration mode. The damping values reveal which modes are unstable and therefore likely to produce noise.

To validate the integrity of a commercial vehicle's exhaust system's structural design is a challenging job. An integrated approach to use both simulation/modeling and hardware testing must be employed to reduce product development cost. In addition to the considerations of the geometry and configuration specs of 70-90 parts and joints as well as material's thermal and mechanical property data in model development, representative loading must be used. For base excitation type of loading, such as the one experienced by the vehicle's exhaust system, one must decide whether to conduct the time domain transient analysis or frequency domain random vibration analysis. Although both methods are well known, few discussions can be found in the literature regarding their effective use in the framework of product design and development. Based on our study, the random vibration method should be used first for identifying high stress locations in the system and for design optimization.

This paper describes an analytical process for the design of a brake shoe assembly that consists of the linings, shoe table, webs, and rivets. One fundamental performance requirement for the brake shoe assembly is that the linings will not lose clamp force within the desired service life. Key elements of the analytical process involved developing an FEA model with given loading conditions and developing a mathematical model to study the influence parameters of the forces acting on the lining.

Powertrain torsional vibration has become a subject of increasing concern for the heavy duty truck industry in recent years. This is due in part to truck and diesel engine developments, and to drivetrain system trends. A computer simulation is an effective tool in analyzing this problem. A powertrain vibration analysis program has been developed by the authors. It has been used extensively in the evaluation and optimization of powertrain system performance. In this paper, first the heavy duty powertrain is characterized as a vibrating system. Its natural frequencies, mode shapes and frequency response characteristics are reviewed. Second, the theory of torsional vibration and its application in the simulation are described. The drivetrain is described as a discreet model. An undamped modal analysis is given as an eigenvalue problem.

In recent years, several transit agencies have tested buses equipped with hybrid powertrain systems. It has been reported that hybrid powertrains have significant advantages over conventional diesel engine systems, in the area of emissions and fuel economy performance. Presented in this paper are engineering issues and suggestions from an auto component supplier point of view in the design of such a powertrain system. The particular system being considered consists of a downsized diesel engine, a generator, a battery package, two identical AC induction motors, and gearbox systems for the left and right driven wheels. The assembly is supported by an H-shaped suspension sub-structure uniquely designed to achieve the “ultra-low floor” configuration. Our discussion covers the system performance, as well as the durability issues. In particular, the presentation focuses on the durability and the design layout of the gearbox and suspension substructure.

The effectiveness of computer simulation modeling for product development support is evidenced by its wide-spread usage. For example, finite element analysis (FEA), has been found indispensable for reducing product development cycle time and cost as well as enhancing product quality. Along with other pertinent information, accurately defined loads are necessary for conducting effective FEA for product design optimizations. FEA results using rough estimated loads often do not provide a good basis for design improvement. A better approach is to define loads through system simulation modeling. The development of such a model involves the synthesis of a wide range of product design knowledge along with a systematic process for model correlation. As the technology becomes matured, there is a strong drive to make the process more efficient by integrating the different types of simulation techniques. Two examples are given in this paper.

Welding has been used extensively in automotive components design due to its flexibility to be applied in manufacturing, high structural strength and low cost. To improve fuel economy and reduce material cost, weight reduction by optimized structural design has been a high priority in auto industry. In the majority of heavy duty vehicle's chassis components design, the ability to predict the mechanical performance of welded joints is the key to success of structural optimization. FEA (finite element analysis) has been used in the industry to analyze welded parts. However, mesh sensitivity and material properties have been major issues due to geometry irregularity, metallurgical degradation of the base material, and inherent residual stress associated with welded joints. An approach, equilibrium-equivalent structural stress method, led by Battelle and through several joint industrial projects (JIP), has been developed.