Search Results

Standard

PREFERRED THICKNESSES FOR UNCOATED FLAT METALS (THRU 12 MM)

1984-06-01

HISTORICAL

J446_198406

The preferred thicknesses in Table 1 provide an orderly metric (SI) series for designating the thickness of uncoated flat metal products of rectangular cross section. The thicknesses shown are also applicable to base metals which may be coated in later operations.

Standard

PREFERRED THICKNESSES FOR UNCOATED FLAT METALS (THRU 12 MM)

1978-05-01

HISTORICAL

J446A_197805

The preferred thicknesses in Table 1 provide an orderly metric (SI) series for designating the thickness of uncoated flat metal products of rectangular cross section. The thicknesses shown are also applicable to base metals which may be coated in later operations.

Standard

PROPERTIES OF LOW CARBON SHEET STEEL AND THEIR RELATIONSHIP TO FORMABILITY

1984-06-01

HISTORICAL

J877_198406

Standard

PROPERTIES OF LOW CARBON STEEL SHEETS AND STRIP AND THEIR RELATIONSHIP TO FORMABILITY

1963-10-01

HISTORICAL

J877_196310

Standard

GLOSSARY OF CARBON STEEL SHEET AND STRIP TERMS

1988-12-01

HISTORICAL

J940_198812

This glossary is intended to provide engineers, metallurgists, and production personnel with uniform definitions of commonly used carbon sheet and strip terms. The glossary serves to supplement information and photographs reported in SAE J810, J763, J877, J863, J403, and J1562. Many of the terms listed apply only to hot-dipped zinc-coated products or to uncoated products. The letter C following the term identifies a term applying to coated materials, while the letters NC identify a term applying to uncoated materials. Where no identification is provided, the term is common to both.

Standard

GLOSSARY OF CARBON STEEL SHEET AND STRIP TERMS

1994-10-01

HISTORICAL

J940_199410

This glossary is intended to provide engineers, metallurgists, and production personnel with uniform definitions of commonly used carbon sheet and strip terms. The glossary serves to supplement information and photographs reported in SAE J810, J763, J877, J863, and J403. Many of the terms listed apply only to hot-dipped zinc-coated products or to uncoated products. The letter C following the term identifies a term applying to coated materials, while the letters NC identify a term applying to uncoated materials. Where no identification is provided, the term is common to both.

Standard

METHOD FOR DETERMINING BREAKAGE ALLOWANCES FOR SHEET STEEL

1986-06-01

HISTORICAL

J424_198606

This method is recommended for establishing breakage allowances for parts fabricated from cut lengths or blanks, or from coils processed directly into a progressive-die pressline, and is equitable to both the sheet producer and the fabricator.

Standard

METHOD FOR DETERMINING BREAKAGE ALLOWANCES FOR SHEET STEEL

1981-10-01

HISTORICAL

J424_198110

This method is recommended for establishing breakage allowances for parts fabricated from cut lengths or blanks, or from coils processed directly into a progressive-die pressline, and is equitable to both the sheet producer and the fabricator.

Standard

CLASSIFICATION OF COMMON IMPERFECTIONS IN SHEET STEEL

1987-03-01

HISTORICAL

J810_198703

Standard

CLASSIFICATION OF COMMON IMPERFECTIONS IN SHEET STEEL

1980-06-01

HISTORICAL

J810_198006

Standard

CATEGORIZATION OF LOW CARBON AUTOMOTIVE SHEET STEEL

1992-07-01

HISTORICAL

J2096_199207

This SAE Recommended Practice establishes a nomenclature for categorizing low carbon automotive hot rolled sheet, cold rolled sheet, and zinc and zinc alloy coated sheets.

Standard

PROPERTIES OF GALVANIZED LOW CARBON SHEET STEELS AND THEIR RELATION TO FORMABILITY

1987-09-01

HISTORICAL

J1852_198709

The purpose of this SAE Information Report is to describe those properties of galvanized low carbon sheet steel which relate to its formability; that is, its ability to be formed with the structural, dimensional and surface integrity to fulfill the design intent.

Standard

SURFACE TEXTURE MEASUREMENT OF COLD ROLLED SHEET STEEL

1965-06-01

HISTORICAL

J911_196501

This SAE Recommended Practice describes a method for measuring the surface texture of cold rolled, matte finish, sheet steel product with a roughness height rating of 20-80 Mu in.

Standard

Surface Roughness and Peak Count Measurement of Cold-Rolled Steel Sheet

1998-03-01

HISTORICAL

J911_199803

This SAE Recommended Practice describes a method for measuring Roughness Average (Ra) and Peak Count (PC) of the surface of cold-rolled steel sheet.

Standard

METHODS OF DETERMINING PLASTIC DEFORMATION IN SHEET STEEL STAMPINGS

1966-08-01

HISTORICAL

J863A_196608

This SAE Recommended Practice describes methods for determining the extent of plastic deformation encountered in the forming or drawing of steel sheets.

Standard

Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet

2009-01-13

HISTORICAL

J1562_200901

Zinc and zinc-alloy coated steel is used to enhance a structure’s protection against corrosion degradation. For the purpose of this SAE Recommended Practice, a galvanized coating is defined as a zinc or zinc-alloy metallic coating. The selection of the optimum galvanized steel sheet product depends on many factors, the most important being: desired corrosion protection, formability, weldability, surface characteristics, and paintability. The trade-offs of these product characteristics are more complex than is the case with uncoated steel sheet products.

Standard

Categorization and Properties of Advanced High Strength Automotive Sheet Steels

2007-07-30

HISTORICAL

J2745_200707

This SAE Recommended Practice defines various grades of continuously cast high-strength sheet steels and establishes mechanical property ranges. These sheet steels can be formed, welded, assembled and painted in automotive manufacturing processes. They can be specified as hot-rolled or cold-rolled sheet. Furthermore, they can be coated (hot-dipped galvanized, hot-dipped galvannealed, and electrogalvanized) or uncoated. Not all combinations of strength, dimensions and coatings may be commercially available; consult your steel supplier for details.

Standard

SELECTING AND SPECIFYING HOT AND COLD ROLLED STEEL SHEET AND STRIP

1981-06-01

HISTORICAL

J126_198106

This SAE Recommended Practice outlines a procedure for selecting the proper specification for carbon steel sheet and strip which are purchased to make an identified part. Specifications considered are: It also describes how codes or symbols for specifying certain characteristics may be used in electronic data processing systems. Characteristics covered are: (A) Hot or cold rolled. (B) Sheet or strip. (C) Severity of draw (quality of steel). (D) Surface condition (finish, etc.). (E) Edge condition. (F) Dimensions. It is intended that other characteristics and part identification be covered by a supplement to the specification, as necessary.

Standard

SELECTING AND SPECIFYING HOT AND COLD ROLLED STEEL SHEET AND STRIP

1979-02-01

HISTORICAL

J126A_197902

This SAE Recommended Practice outlines a procedure for selecting the proper specification for carbon steel sheet and strip which are purchased to make an identified part. Specifications considered are: It also describes how codes or symbols for specifying certain characteristics may be used in electronic data processing systems. Characteristics covered are: (A) Hot or cold rolled. (B) Sheet or strip. (C) Severity of draw (quality of steel). (D) Surface condition (finish, etc.). (E) Edge condition. (F) Dimensions. It is intended that other characteristics and part identification be covered by a supplement to the specification, as necessary.

Standard

SELECTING AND SPECIFYING HOT AND COLD ROLLED STEEL SHEET AND STRIP

1986-06-01

HISTORICAL

J126_198606

This SAE Recommended Practice outlines a procedure for selecting the proper specification for carbon steel sheet and strip which are purchased to make an identified part. Specifications considered are: It also describes how codes or symbols for specifying certain characteristics may be used in electronic data processing systems. Characteristics covered are: a Hot or cold rolled. b Sheet or strip. c Severity of draw (quality of steel). d Surface condition (finish, etc.). e Edge condition. f Dimensions. It is intended that other characteristics and part identification be covered by a supplement to the specification, as necessary.