Search Results

Standard

SUPPLEMENTAL HIGH MOUNTED STOP AND REAR TURN SIGNAL LAMPS FOR USE ON VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH

1982-11-01

HISTORICAL

J186_198211

This technical report provides design parameters, performance requirements, and general installation recommendations for supplemental high-mounted stop and/or rear turn-signal lamps, intended to supplement stop and/or rear turn-signal lamps described in SAE J586 SEP77 and SAE J588 NOV78, for use on vehicles less than 2032 mm in overall width. It is intended that a separate technical report will be prepared for motor vehicles 2032 mm or more in overall width.

Standard

SUPPLEMENTAL HIGH MOUNTED STOP AND TURN SIGNAL LAMPS

1970-07-01

HISTORICAL

J186_197007

This SAE Recommended Practice provides definitions, performance requirements, and related test procedures for high mounted lamps intended to supplement stop and rear turn signal lamps described in the SAE J586 and J588.

Standard

Rear Cornering Lamps for Use on Motor Vehicles Less than 9.1 m in Overall Length

2006-05-23

HISTORICAL

J1373_200605

This SAE Recommended Practice provides test procedures, requirements, and guidelines for rear cornering lamps for use on vehicles less than 9.1 m in overall length.

Standard

REAR CORNERING LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 9.1 m IN OVERALL LENGTH

1996-04-01

HISTORICAL

J1373_199604

This SAE Recommended Practice provides test procedures, requirements, and guidelines for rear cornering lamps for use on vehicles less than 9.1 m in overall length.

Standard

Rear Cornering Lamps for Use on Motor Vehicles Less than 9.1 m in Overall Length

2015-10-28

CURRENT

J1373_201510

This SAE Recommended Practice provides test procedures, requirements, and guidelines for rear cornering lamps for use on vehicles less than 9.1 m in overall length.

Standard

Rear Cornering Lamps for Use on Motor Vehicles Less than 9.1 m in Overall Length

2010-09-07

HISTORICAL

J1373_201009

This SAE Recommended Practice provides test procedures, requirements, and guidelines for rear cornering lamps for use on vehicles less than 9.1 m in overall length.

Standard

REAR CORNERING LAMP

1982-06-01

HISTORICAL

J1373_198206

This SAE Technical Report provides test procedures, design requirements, performance requirements, and installation requirements for rear cornering lamps for use on vehicles less than 9.1 m in overall length.

Standard

Discharge Signal Lighting System

2001-12-17

HISTORICAL

J2320_200112

This SAE Recommended Practice applies to motor vehicle signaling and marking devices which use light generated by a discharge source. This document provides test methods, requirements, and guidelines applicable to the unique characteristics of discharge lighting systems and their components. These are in addition to those required for signal and marking devices. This document is intended to be a guide to standard practice and is subject to change to reflect additional experience and technical advances.

Standard

Discharge Signal Lighting System

2008-09-02

HISTORICAL

J2320_200809

This SAE Recommended Practice applies to motor vehicle signaling and marking devices which use light generated by a discharge source. This document provides test methods, requirements, and guidelines applicable to the unique characteristics of discharge lighting systems and their components. These are in addition to those required for signal and marking devices. This document is intended to be a guide to standard practice and is subject to change to reflect additional experience and technical advances.

Standard

Lamp Bulb Retention System

1998-03-01

HISTORICAL

J567_199803

This SAE Standard references the performance and functional requirements of the International Electrotechnical Commission (IEC) and its U.S. member, the American National Standards Institute (ANSI). By referring to IEC/ANSI and its standards concerning bulb sockets, lamp holders, and gages, this document recognizes the need for harmonized standards world-wide for what are typically commodity items. Additional requirements are noted.

Standard

Tail Lamp (Rear Position Lamp) for Use on Motor Vehicles Less than, Equal to, or Greater than 2032 mm in Overall Width

2023-04-04

CURRENT

J706_198507

This SAE Standard provides test procedures, requirements, and guidelines for tail lamps (rear position lamps) intended for use on vehicles of less than, equal to, or greater than 2032 mm in overall width.

Standard

Front Position Lamp

2013-03-05

CURRENT

J222_201303

This SAE Standard provides test procedures, requirements, and guidelines for a Front Position lamp.

Standard

Front Position Lamp

2018-05-16

WIP

J222

This SAE Standard provides test procedures, requirements, and guidelines for a Front Position lamp.

Standard

PARKING LAMPS (POSITION LAMPS)

1970-12-01

HISTORICAL

J222_197012

This standard provides test methods and requirements for parking lamps (position lamps).

Standard

Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width

2007-07-16

HISTORICAL

J586_200707

This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles of less than 2032 mm in overall width.

Standard

STOP LAMPS FOR USE ON MOTOR VEHICLES LESS THAN 2032 MM IN OVERALL WIDTH

1989-12-01

HISTORICAL

J586_198912

This document provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles of less than 2032 mm in overall width.

Standard

STOP LAMPS

1977-09-01

HISTORICAL

J586D_197709

This engineering design standard provides design parameters and general requirements for stop lamps. It is intended for use in conjunction with Service Performance Specification, SAE J256.

Standard

STOP LAMPS

1966-06-01

HISTORICAL

J586B_196606

Standard

STOP LAMPS

1970-08-01

HISTORICAL

J586C_197008

This standard provides test methods and requirements for stop lamps.

Standard

Stop Lamp for Use on Motor Vehicles Less than, Equal to, or Greater than 2032 mm in Overall Width

2021-06-09

WIP

J586

This SAE Standard provides test procedures, requirements, and guidelines for stop lamps intended for use on vehicles of less than 2032 mm in overall width.