Refine Your Search

Topic

Search Results

Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2014-04-09
CURRENT
J89_201404
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Tests for Snowmobile Switching Devices and Components

2018-08-30
WIP
J68
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Tests for Snowmobile Switching Devices and Components

2017-04-04
CURRENT
J68_201704
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Tests for Snowmobile Switching Devices and Components

1991-12-01
HISTORICAL
J68_199112
This SAE Recommended practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Tests for Snowmobile Switching Devices and Components

2004-02-24
HISTORICAL
J68_200402
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Vehicle Identification Numbers--Snowmobiles

2007-02-21
CURRENT
J64_200702
This SAE Standard is intended to provide uniform requirements for the visibility and durability of vehicle identification numbers on snowmobiles.
Standard

Vehicle Identification Numbers--Snowmobiles

1995-05-01
HISTORICAL
J64_199505
This SAE Standard is intended to provide uniform requirements for the visibility and durability of vehicle identification numbers on snowmobiles.
Standard

Vehicle Identification Numbers--Snowmobiles

1988-04-01
HISTORICAL
J64_198804
This SAE Standard is intended to provide uniform requirements for the visibility and durability of vehicle identification numbers on snowmobiles.
Standard

Vehicle Identification Numbers--Snowmobiles

1973-03-01
HISTORICAL
J64_197303
This SAE Standard is intended to provide uniform requirements for the visibility and durability of vehicle identification numbers on snowmobiles.
Standard

Snowmobile Throttle Control Systems

1995-05-01
HISTORICAL
J92_199505
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Throttle Control Systems

1976-09-01
HISTORICAL
J92_197609
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Throttle Control Systems

2010-08-26
CURRENT
J92_201008
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand throttle control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

1973-07-01
HISTORICAL
J89_197307
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

1985-01-01
HISTORICAL
J89_198501
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

1995-06-01
HISTORICAL
J89_199506
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

1976-04-01
HISTORICAL
J89A_197604
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2007-04-13
HISTORICAL
J89_200704
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
X