Refine Your Search

Topic

Search Results

Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2014-04-09
HISTORICAL
J89_201404
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2018-11-14
CURRENT
J89_201811
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Tests for Snowmobile Switching Devices and Components

2004-02-24
HISTORICAL
J68_200402
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Tests for Snowmobile Switching Devices and Components

2017-04-04
HISTORICAL
J68_201704
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Tests for Snowmobile Switching Devices and Components

2019-10-07
CURRENT
J68_201910
This SAE Recommended Practice covers standardized basic tests, test methods, and requirements applicable to electromechanical switching devices which may be used on snowmobiles as defined in SAE J33.
Standard

Brake System Test Procedure—Snowmobiles

2009-05-07
HISTORICAL
J45_200905
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Brake System Test Procedure - Snowmobiles

2016-08-09
HISTORICAL
J45_201608
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Brake System Test Procedure - Snowmobiles

2018-11-14
CURRENT
J45_201811
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Brake System Test Procedure--Snowmobiles

1973-10-01
HISTORICAL
J45_197310
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles. Purpose This procedure offers a method of testing snowmobiles on turf. Turf is preferred over snow because test repeatability is more easily obtained. In addition, tests shall be conducted under winter conditions to ensure that the braking systems remain operative and that the vehicle has no undue tendency to lose stability, overturn, or swerve out of a test lane 1.2 m (4 ft) wider than the vehicle when the brakes are applied. The purpose of the document is to establish brake system capabilities with regard to deceleration or stopping distance versus applied brake lever force, as affected by vehicle speed, brake temperature, and usage.
Standard

Brake System Test Procedure--Snowmobiles

1984-10-01
HISTORICAL
J45_198410
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles. Purpose This procedure offers a method of testing snowmobiles on turf. Turf is preferred over snow because test repeatability is more easily obtained. In addition, tests shall be conducted under winter conditions to ensure that the braking systems remain operative and that the vehicle has no undue tendency to lose stability, overturn, or swerve out of a test lane 1.2 m (4 ft) wider than the vehicle when the brakes are applied. The purpose of the document is to establish brake system capabilities with regard to deceleration or stopping distance versus applied brake lever force, as affected by vehicle speed, brake temperature, and usage.
Standard

Brake System Test Procedure--Snowmobiles

2003-02-19
HISTORICAL
J45_200302
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles. Purpose This procedure offers a method of testing snowmobiles on turf. Turf is preferred over snow because test repeatability is more easily obtained. In addition, tests shall be conducted under winter conditions to ensure that the braking systems remain operative and that the vehicle has no undue tendency to lose stability, overturn, or swerve out of a test lane 1.2 m (4 ft) wider than the vehicle when the brakes are applied. The purpose of the document is to establish brake system capabilities with regard to deceleration or stopping distance versus applied brake lever force, as affected by vehicle speed, brake temperature, and usage.
Standard

Brake System Test Procedure - Snowmobiles

2019-03-28
WIP
J45
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Snowmobile Brake Control Systems

2012-04-09
HISTORICAL
J1282_201204
This SAE Recommended Practice is intended to provide the minimum acceptable criteria for snowmobile hand brake control systems. This recommendation is not intended to cover competition vehicles nor is it intended to limit development of new and/or improved technology in controls. Although these recommendations are primarily addressed to hand control systems using an outer flexible conduit with a multiple strand inner cable or hydraulic type brake control system, the basic requirements of freedom of movement, strength, material, etc., will apply to any system.
Standard

Snowmobile Drive Mechanisms

2018-06-12
CURRENT
J1279_201806
This SAE Recommended Practice is applicable to snowmobiles as defined in SAE J33.
Standard

Snowmobile Drive Mechanisms

2010-08-26
HISTORICAL
J1279_201008
This SAE Recommended Practice is applicable to snowmobiles as defined in SAE J33.
X