Refine Your Search

Search Results

Viewing 1 to 20 of 20
Standard

Dynamic Cushioning Performance Criteria for Snowmobile Seats

2018-11-14
CURRENT
J89_201811
This SAE Recommended Practice encompasses the significant factors which determine the effectiveness of a seat system in limiting spinal injury during vertical impacts between the rider and the snowmobile seat system. The document is intended to provide a tool for the development of safer snowmobile seats. It is recognized that the seat is only a portion of the entire vehicle protective suspension system. It is, however, usually required that the seat serve as added protection to the suspension system, since the latter may "bottom out" during a severe impact. The term "seat" refers to the occupant-supporting system not normally considered part of the vehicle suspension or frame system. In some cases, it may include more than the foam cushion.
Standard

Brake System Test Procedure—Snowmobiles

2009-05-07
HISTORICAL
J45_200905
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Brake System Test Procedure - Snowmobiles

2016-08-09
HISTORICAL
J45_201608
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Brake System Test Procedure - Snowmobiles

2018-11-14
CURRENT
J45_201811
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Brake System Test Procedure - Snowmobiles

2019-03-28
WIP
J45
This SAE Recommended Practice establishes a uniform procedure for the level surface testing of hand-operated brake systems on recreational noncompetitive snowmobiles.
Standard

Snowmobile Drive Mechanisms

2018-06-12
CURRENT
J1279_201806
This SAE Recommended Practice is applicable to snowmobiles as defined in SAE J33.
Standard

Snowmobile Drive Mechanisms

2010-08-26
HISTORICAL
J1279_201008
This SAE Recommended Practice is applicable to snowmobiles as defined in SAE J33.
Standard

Snowmobile Probe Test for Contact with Power Driven Parts

2016-02-18
CURRENT
J2826_201602
This SAE Recommended Practice establishes the test equipment, procedure, and acceptance criteria necessary to determine the location of power driven components that could, upon inadvertent contact by an operator, passenger, or bystander, inflict injury.
Standard

Snowmobile Definitions and Nomenclature--General

2000-12-08
HISTORICAL
J33_200012
This SAE Recommended Practice sets forth accepted definitions and terminology of major components and parts peculiar to snowmobiles. Illustrations have been selected to identify functional characteristics and to identify common mechanisms. They are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobile nomenclature.
Standard

Snowmobile Definitions and Nomenclature-General

1991-12-26
HISTORICAL
J33_199112
This SAE Recommended Practice sets forth accepted definitions and terminology of major components and parts peculiar to snowmobiles. Illustrations have been selected to identify functional characteristics and to identify common mechanisms. They are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobile nomenclature.
Standard

Snowmobile Definitions and Nomenclature--General

1973-03-01
HISTORICAL
J33_197303
This SAE Recommended Practice sets forth accepted definitions and terminology of major components and parts peculiar to snowmobiles. Illustrations have been selected to identify functional characteristics and to identify common mechanisms. They are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobile nomenclature.
Standard

Snowmobile Definitions and Nomenclature--General

1977-05-01
HISTORICAL
J33A_197705
This SAE Recommended Practice sets forth accepted definitions and terminology of major components and parts peculiar to snowmobiles. Illustrations have been selected to identify functional characteristics and to identify common mechanisms. They are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobile nomenclature.
Standard

Measurement of Exhaust Sound Levels of Stationary Snowmobiles

2020-08-10
WIP
J2567
This SAE Recommended Practice establishes the test procedure, environment and instrumentation for determining the sound levels of snowmobiles in the stationary test mode. This test method is intended to provide an accurate measurement of exhaust and other engine noise and may be used to evaluate new and in- use snowmobiles to determine compliance with noise control regulations. Sound level measurements obtained with this test method are not intended as an engineering determination of overall machine noise. For this purpose, the use of SAE J192 is recommended.
Standard

Measurement of Exhaust Sound Levels of Stationary Snowmobiles

2015-11-24
CURRENT
J2567_201511
This SAE Recommended Practice establishes the test procedure, environment and instrumentation for determining the sound levels of snowmobiles in the stationary test mode. This test method is intended to provide an accurate measurement of exhaust and other engine noise and may be used to evaluate new and in-use snowmobiles to determine compliance with noise control regulations. Sound level measurements obtained with this test method are not intended as an engineering determination of overall machine noise. For this purpose, the use of SAE J192 is recommended.
Standard

Snowmobile Passenger Handgrips

2008-04-21
HISTORICAL
J1062_200804
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
Standard

Snowmobile Passenger Handgrips

2019-07-24
CURRENT
J1062_201907
This SAE Recommended Practice is intended to give information to engineers and designers in order that access to a passenger handgrip, when used, is easily obtained, and that such handgrips offer maximum safety for a person at least as large as a 95th percentile adult male during snowmobile operation.
X