Refine Your Search

Search Results

Viewing 1 to 14 of 14
Technical Paper

Electric Power Train Configurations with Appropriate Transmission Systems

2011-04-12
2011-01-0942
Referring to the transmission development, three different classifications of the power train are useful. These are the conventional power train with combustion-engined drive of the wheels, the electric power train with electromotive drive of the wheels and the hybrid power train with both types of drive. Due to this division, the micro hybrid belongs to the conventional power train while the serial hybrid is classified with the electric power train. Subdivisions of the electric power train are the decentralized drives near the axle shafts or the wheel hub drive and the central drive with differential. The choice of the electric motor is dependent on different influences such as the package, the costs or the application area. Furthermore the execution of the transmission system does influence the electric motor. Wheel hub drives are usually executed on wheel speed level or with single ratio transmission.
Journal Article

Control Strategy for the Excitation of a Complete Vehicle Test Rig with Terrain Constraints

2013-04-08
2013-01-0671
A unique concept for a multi-body test rig enabling the simulation of longitudinal, steering and vertical dynamics was developed at the Institute for Mechatronic Systems (IMS) at TU Darmstadt. A prototype of this IMS test rig is currently being built. In conjunction with the IMS test rig, the Vehicle Terrain Performance Laboratory (VTPL) at Virginia Tech further developed a full car, seven degree of freedom (7 DOF) simulation model capable of accurately reproducing measured displacement, pitch, and roll of the vehicle body due to terrain excitation. The results of the 7 DOF car model were used as the reference input to the multi-body IMS test rig model. The goal of the IMS/VTPL joint effort was to determine whether or not a controller for the IMS test rig vertical actuator could accurately reproduce wheel displacements due to different measured terrain constraints.
Technical Paper

Control Strategy for the Longitudinal Degree of Freedom of a Complete Vehicle Test Rig

2012-04-16
2012-01-0232
The Institute for Mechatronic Systems in Mechanical Engineering (IMS) designed a concept for a test rig, which enables the simulation of longitudinal, steering and vertical dynamics for a complete vehicle under laboratory conditions. The main part of the test rig concept is a shaft, which contains three constant velocity joints and two ball-spline supported length compensations. It connects the wheel hub of the test car to an electric motor. In addition a linear actuator is mounted to the middle part of the shaft and a hydraulic actuator replaces the suspension strut. These actuators can load the longitudinal, steering and vertical degree of freedom of the test car according to simulated driving maneuvers. A prototype of this concept is being built at the IMS lab. Beginning with a precise explanation of the test rig concept this paper discusses the control strategy for the rotational speed of the wheel hub of the car mounted on the test rig based on a simulation.
Journal Article

Car-in-the-Loop Complete Vehicle Test Rig

2015-04-14
2015-01-0647
During the last years mechatronic systems developed into one of the biggest drivers of innovation in the automotive industry. The start of production of systems like dual clutch transmission, lane departure warning systems and active suspensions proves this statement. These systems have an influence on the longitudinal, steering and vertical dynamics of the vehicle. That is why the interaction on vehicle level is crucial for an optimal result in the fields of efficiency, comfort, safety and dynamics. To optimize the interaction of mechatronic systems, in this paper a new test rig concept for a complete vehicle is presented. The so-called Car-in-the-Loop-concept is capable of realistically reproducing the loads, which act on the powertrain, the steering and the suspension during a test drive.
Journal Article

Comparison of Parameter-Identified Simulation Models with Different Detailing Level to Reproduce the Side Shaft Torque of an Automotive Powertrain with Automatic Transmission

2016-04-05
2016-01-1148
The underlying basic model represents a powertrain with automatic transmission including a torque converter. It is based on a greybox-modeling approach, which refers to ordinary differential equations with identified parameters and characteristic curves. The validated basic model is extended in order to reproduce the system behavior and especially the side shaft torque during a gear shift process. Therefore the model is extended by a transmission model with clutches for gear shifting in order to simulate specific powertrain dynamics additionally. The parameters have already been determined for the basic model using a method for isolated and structured parameter identification based on measurement data of an automotive powertrain test bench. A comparable structured parameter identification method is applied to obtain the parameters of the extended model.
Journal Article

The Development of Terrain Pre-filtering Technique Based on Constraint Mode Tire Model

2015-09-01
2015-01-9113
The vertical force generated from terrain-tire interaction has long been of interest for vehicle dynamic simulations and chassis development. To improve simulation efficiency while still providing reliable load prediction, a terrain pre-filtering technique using a constraint mode tire model is developed. The wheel is assumed to convey one quarter of the vehicle load constantly. At each location along the tire's path, the wheel center height is adjusted until the spindle load reaches the pre-designated load. The resultant vertical trajectory of the wheel center can be used as an equivalent terrain profile input to a simplified tire model. During iterative simulations, the filtered terrain profile, coupled with a simple point follower tire model is used to predict the spindle force. The same vehicle dynamic simulation system coupled with constraint mode tire model is built to generate reference forces.
Journal Article

Signal Generator for Prediction of Transient Control Signals of an Automotive Transmission Control Unit Depending on Scalar Calibration Parameters

2016-10-17
2016-01-2155
In this investigation an innovative signal generator will be introduced, which enables the generation of transient control signals for the gearshift process. The signals are generated merely depending on scalar transmission control unit (TCU) calibration parameters. The signal generator replaces the comprehensive TCU software within the simulation environment. Thus no extensive residual bus simulation is required. Multiple experimental models represent the core part of the signal generator. To predict the system behavior of the underlying system, the models are trained using measured data from a powertrain with automatic transmission mounted on a test rig. The results demonstrate that the introduced signal generator is suitable to predict transient control signals for the gearshift operation accurately. In combination with an additional powertrain model it is possible to simulate the gearshift process and subsequently to evaluate the gearshift comfort.
Journal Article

Theoretical and Experimental Investigation on Power Loss of Vehicle Transmission Synchronizers with Spray Lubrication

2019-01-15
2019-01-0028
Besides optimal engine systems, high-efficiency vehicle transmissions are generally also required to improve fuel economy in automotive applications. For the energy loss analysis in transmissions, most research focused on the major mechanical components, such as gears, bearings and seals, while the other mechanical losses, like synchronizer losses, were usually not considered. With increasing number of synchronizers in modern transmissions, a recent study indicates that the power loss analysis of synchronizers should also be developed and appended for a more accurate investigation on overall power losses in transmissions. The function of synchronizer is to equalize the different rotational speeds of shafts and gear wheels by frictional torques, for which the synchronizer must be cooled and lubricated in order to enhance the service life. With the supplement of lubricants, fluid friction is generated due to the differential speed, when the synchronizer is in neutral position.
Technical Paper

Implementation of an Open-Loop Controller to Design the Longitudinal Vehicle Dynamics in Passenger Cars

2017-03-28
2017-01-1107
In order to offer a wide range of driving experiences to their customers, original equipment manufacturers implement different driving programs. The driver is capable of manually switching between these programs which alter drivability parameters in the engine control unit. As a result, acceleration forces and gradients are modified, changing the perceived driving experience. Nowadays, drivability is calibrated iteratively through road testing. Hence, the resulting set of parameters incorporated within the engine control unit is strongly dependent on the individual sentiments and decisions of the test engineers. It is shown, that implementing a set of objective criteria offers a way to reduce the influences of personal preferences and sentiments in the drivability calibration process. In combination with the expertise of the test engineers, the desired vehicle behavior can be formalized into a transient set point sequence to give final shape to the acceleration behavior.
Technical Paper

Investigation of Black Box Modeling Approaches for Representation of Transient Gearshift Processes in Automotive Powertrains with Automatic Transmission

2015-04-14
2015-01-1143
In this investigation two different nonlinear dynamic black box modelling approaches are compared. The purpose of the models is to reproduce the transient gearshift process. The models are used to compute the torque at the sideshafts, which is highly correlated to the gearshift comfort. The first model is a Gaussian process (GP) model. The GP is a probabilistic, non-parametric approach, which is additionally capable to compute the confidence interval of the simulated output signal. The second black box model uses the artificial neural net (ANN) approach. In addition to training algorithms the resulting model configurations for both black box approaches are shown in this investigation. Furthermore the empirical error of both modeling approaches is compared to the predictive variance of the GP model and to the intrinsic uncertainty of the gearshift process.
Technical Paper

Online and Real-Time Condition Prediction for Transmissions based on CAN-Signals

2017-03-28
2017-01-1627
An online and real-time Condition Prediction system, so-called lifetime monitoring system, was developed at the Institute for Mechatronic Systems in Mechanical Engineering (IMS) of the TU Darmstadt, which is intended for implementation in standard control units of series production cars. Without additional hardware and only based on sensors and signals already available in a standard car, the lifetime monitoring system aims at recording the load/usage profiles of transmission components in aggregated form and at estimating continuously their remaining useful life. For this purpose, the dynamic transmission input and output torques are acquired realistically through sensor fusion. In a further step, the lifetime monitoring system is used as an input-module for the introduction of innovative procedures to more load appropriate dimensioning, cost-efficient lightweight design, failure-free operation and predictive maintenance of transmissions.
Technical Paper

Modelling of Power Losses of Transmission Synchronizers in Neutral Position

2018-04-03
2018-01-1228
Developing an energy-efficient powertrain system is a solution for environment-friendly vehicles. Furthermore, it also enhances the performance of vehicles. In powertrain system, transmission plays an important role in terms of vehicle dynamic performance and energy consumption. Therefore, a lot of researches have been conducted on modelling power losses inside the transmission. Basically, the power losses in transmission consist of bearing losses, drag torque losses on gear blank that is immersed in the oil and gear mesh losses due to the sliding frictional force on gear flank. According to some experiments in the latest literatures, power losses of synchronizers cannot be neglected, when its shift sleeve is in neutral position. Principally, power losses of synchronizers in neutral position mainly come from load independent drag torque.
Journal Article

Stochastic Synthesis of Representative and Multidimensional Driving Cycles

2018-04-03
2018-01-0095
Driving cycles play a fundamental role in the design of components, in the optimization of control strategies for drivetrain topologies, and in the identification of vehicle properties. The focus on a single or a few test cycles results in a risk of non-optimal or even poor design regarding the real usage profiles. Ideally, multiple different driving cycles that are representative of the real and scattering operating conditions are used. Therefore, tools for the stochastic generation of representative driving cycles are required, and many works have addressed this issue with different approaches. Until now, the stochastic generation of representative testing cycles has been limited to low dimensionality, and only a few works have studied higher dimensionality using Markov chain theory. However, it is mandatory to create tools that can stochastically generate multidimensional cycles incorporating all relevant operating conditions and maintaining signal dependency at the same time.
Technical Paper

Parameter Identification of a Power Loss Model for Vehicle Transmissions Based on Sensitivity Analysis

2020-09-15
2020-01-2244
As the transmission design directly impacts drive unite operation and power flow to the driveline, the transmission power loss is a critical target in the drivetrain development. The demand of more precise and more efficient power loss prediction has therefore increased significantly, which highlights the need of new methodologies in order to optimize the power loss model for vehicle transmissions. The possible power losses that exist in the power flow path, are gear mesh losses, gear churning losses, gear windage losses, bearing losses, synchronizer losses and sealing losses. Thanks to the decades of research, analytical models are available for the prediction of these component losses, which could deliver power loss distributions and overall efficiency maps of complex transmissions. The aim of this paper is to introduce a methodology to improve the accuracy of a chosen power loss model on a system level.
X