Refine Your Search

Search Results

Viewing 1 to 13 of 13
Technical Paper

SIMON: A New Vehicle Simulation Model for Vehicle Design and Safety Research

2001-03-05
2001-01-0503
SIMON is a new vehicle dynamic simulation model. Applications for SIMON include single- and multi-unit vehicle handling simulation in severe limit maneuvers (including rollovers) and 3-dimensional environments. Applications also include vehicle-to-vehicle and vehicle-to-barrier collisions. This paper provides the technical background for the SIMON engineering model. The 3-dimensional equations of motion used by the model are presented and explained in detail. The calculations for suspension, tire, collision, aerodynamic and inter-vehicle connection forces and moments are also developed. The integration of features available in the HVE Simulation Environment, such as DyMESH, the Driver Model, Brake Designer and Steer Degree of Freedom, is also explained. Finally, assumptions and limitations of the model are presented.
Technical Paper

Three-Dimensional Reconstruction and Simulation of Motor Vehicle Accidents

1996-02-01
960890
This paper describes the use of 3-D technologies for reconstructing and simulating motor vehicle accidents involving humans (occupants and pedestrians) and vehicles (passenger cars, pickups, vans, multi-purpose vehicles, on-highway trucks and vehicle-trailers). All examples involve three-dimensional environments, including road crowns, hills, curbs and embankments - any geometrical feature resulting in three-dimensional motion. Various reconstruction and simulation models are illustrated. The features and limitations of each model are addressed. Issues involving data requirements, preparation of 3-D models and presentation techniques (numeric, graphic and video animation) are also explored.
Technical Paper

Validation of the EDVSM 3-Dimensional Vehicle Simulator

1997-02-24
970958
EDVSM is a 3-dimensional vehicle simulator developed for the HVE simulation environment. The EDVSM vehicle model was based on the original HVOSM model, developed at Calspan for the Federal Highway Administration. This paper describes the vehicle and tire models used by EDVSM. The basic model is unchanged from the original HVOSM model, however, tire-road modeling has been substantially improved by the model's integration into the HVE environment. This paper provides the details of the integration procedure. The paper also includes a validation study, comparing results between EDVSM, HVOSM and real-world handling studies. Comparison reveals the results are substantially similar. Finally, applications and limitations of the model are addressed.
Technical Paper

An Overview of the HVE Vehicle Model

1995-02-01
950308
Developers of vehicle dynamics simulation software inherently use a mathematical/physical model to represent the vehicle. This paper describes a pre-programmed, object-oriented vehicle model for use in vehicle dynamics simulations. This vehicle model is included as part of an integrated simulation environment, called HVE (Human-Vehicle-Environment), described in previous research [1,2] *. The current paper first provides a general overview of the HVE user and development environments, and then provides detailed specifications for the HVE Vehicle Model. These specifications include definitions for model parameters (supported vehicle types; vehicle properties, such as dimensions, inertias, suspensions; tire properties, such as dimensions and inertias, mu vs slip, cornering and camber stiffnesses; driver control systems, such as engine, transmission/differential, brakes and steering; restraint systems, such as belts and airbags).
Technical Paper

An Overview of the HVE Developer's Toolkit

1994-03-01
940923
A substantial programming effort is required to develop a human or vehicle dynamics simulator. More than half of this effort is spent designing and programming the user interface (the means by which the user supplies program input and views program output). This paper describes a pre-programmed, 3-dimensional (3-D), input/output window-type interface which may be used by developers of human and vehicle dynamics programs. By using this interface, the task of input/output programming is reduced by approximately 50 percent, while simultaneously providing a more robust interface. This paper provides a conceptual overview of the interface, as well as specific details for writing human and vehicle dynamics programs which are compatible with the interface. Structures are provided for the human, vehicle and environment models. Structures are also provided for events, interface variables, and the output data stream.
Technical Paper

Why Simulation? An Interesting Case Study

2016-04-05
2016-01-1484
This paper presents an example application for vehicle dynamics simulation software. This example investigates the validity of the vehicle motion presented in the famous car chase scene from the 1968 movie Bullitt. In this car chase, a 1968 Ford Mustang, driven by Det. Frank Bullitt of the San Francisco Police Department, is chasing a criminal driving a 1968 Dodge Charger through the streets of the Russian Hill district of San Francisco. The purpose of the simulation was to reconstruct the chase scene to determine the level of realism in the movie, in terms of conformance to Newton’s Laws of motion. To produce the simulation, several city blocks of the pertinent area of the city were surveyed and exemplar vehicles were measured and inspected. Three-dimensional computer models of the scene and vehicles were built. The movie footage was analyzed to determine vehicle speeds and driver inputs. The event was then simulated using three-dimensional vehicle dynamics simulation software.
Technical Paper

Applications and Limitations of 3-Dimensional Vehicle Rollover Simulation

2000-03-06
2000-01-0852
Vehicle crashes often involve rollover. A vehicle rollover is a complex, 3-dimensional event that is quite difficult to model successfully. As a result, crash investigators often make simplifying assumptions that compromise the quality of the information learned from the analysis. Advances in vehicle simulation modeling have greatly reduced the amount of work required to perform rollover simulations. Rollover simulation holds promise as a tool to learn more about crashes involving rollover. This paper describes how the EDVSM simulation model calculates 3-dimensional forces and moments on the sprung mass (i.e., body exterior) and how these forces and moments are integrated into the equations of motion. The paper also provides some examples of the use of rollover simulation. Finally, the paper addresses the practical and theoretical limitations of rollover simulation as a tool for routine reconstruction of on-road and off-road crashes. VEHICLE ROLLOVER is a significant safety problem.
Technical Paper

The Simulation of Driver Inputs Using a Vehicle Driver Model

2000-03-06
2000-01-1313
Traditional vehicle simulations use two methods of modeling driver inputs, such as steering and braking. These methods are broadly categorized as “Open Loop” and “Closed Loop”. Open loop methods are most common and use tables of driver inputs vs time. Closed loop methods employ a mathematical model of the driving task and some method of defining an attempted path for the vehicle to follow. Closed loop methods have a significant advantage over open loop methods in that they do not require a trial-and-error approach normally required by open loop methods to achieve the desired vehicle path. As a result, closed loop methods may result in significant time savings and associated user productivity. Historically, however, closed loop methods have had two drawbacks: First, they require user inputs that are non-intuitive and difficult to determine. Second, closed loop methods often have stability problems.
Technical Paper

Integrating Design and Virtual Test Environments for Brake Component Design and Material Selection

2000-03-06
2000-01-1294
A new, systematic approach to the design-evaluation-test product development cycle is described wherein the vehicle design and simulation environments are integrated. This methodology is applied to brake mechanical design and material selection. Time-domain computations within a vehicle dynamic simulation environment account for brake and lining geometry and material properties, actuator properties, and temperature effects. Two examples illustrate the utility of this approach by examining: the effect of varying hydraulic cylinder diameter on passing federally mandated stopping distance tests, and the effect of S-cam actuator adjustment on the performance of air brakes on a tractor-trailer. The simulation results are compared with experimental vehicle stopping distance tests to assess the validity of the simulations.
Technical Paper

Validation of the SIMON Model for Vehicle Handling and Collision Simulation - Comparison of Results with Experiments and Other Models

2004-03-08
2004-01-1207
SIMON is a new 3-dimensional vehicle dynamic simulation model. The capabilities of the model include non-linear handling maneuvers and collision simulation for one or more vehicles. As a new model, SIMON must be validated by comparison against actual handling and collision experiments. This paper provided that comparison. Included in the validation were lane-change maneuvers, alternate ramp traversals, limit maneuvers with combined braking and steering, vehicle-to-vehicle crash tests and articulated vehicle handling tests. Comparison against other models were included. No metric was provided for handling test comparisons. However, statistical analysis of the collision test results revealed the average path range error was 6.2 to 14.8 percent. The average heading error was -4.7 to 0.7 percent. Delta-V error was -1.6 to 7.5 percent. VEHICLE SIMULATION has many uses in the vehicle design and safety industries.
Technical Paper

Differences Between EDVDS and Phase 4

1999-03-01
1999-01-0103
Motor vehicle safety researchers have used the Phase 4 vehicle simulation model for several years. Because of its popularity and ability to simulate the 3-dimensional dynamics of commercial vehicles (large trucks and truck tractors towing up to three trailers), the Phase 4 model was ported to the HVE simulation platform. The resulting model is called EDVDS (Engineering Dynamics Vehicle Dynamics Simulator). This paper describes the procedures used in porting Phase 4 to the HVE platform. As a result of several assumptions made during the development of Phase 4, the port to EDVDS required substantial changes. The most significant modeling difference is the removal of the small angle assumption, allowing researchers to study complete vehicle rollover. Also significant is EDVDS’s use of HVE’s Get Surface Info () function, allowing the vehicles’ tires to travel over any 3-D terrain of arbitrary complexity. These and other changes in the model are described in the paper.
Technical Paper

A Simulation Model for Vehicle Braking Systems Fitted with ABS

2002-03-04
2002-01-0559
Most vehicles built today are fitted with anti-lock braking systems (ABS). Accurate simulation modeling of these vehicles during braking as well as combined braking and steering maneuvers thus requires the effects of the ABS to be included. Simplified, lump parameter models are not adequate for detailed, 3-dimensional vehicle simulations that include wheel spin dynamics. This is especially true for simulating complex crash avoidance maneuvers. This paper describes a new ABS model included in the HVE simulation environment. It is a general purpose model and is available for use by any HVE-compatible vehicle simulation model. The basic operational and control characteristics for a typical ABS system are first reviewed. Then, the specific ABS model and its options as implemented in the HVE simulation environment and employed by the SIMON vehicle simulation model are described. To validate the model, pressure cycles produced by the model are compared with stated engineering requirements.
Technical Paper

3-Dimensional Simulation of Vehicle Response to Tire Blow-outs

1998-02-23
980221
Sudden tire deflation, or blow-out, is sometimes cited as the cause of a crash. Safety researchers have previously attempted to study the loss of vehicle control resulting from a blow-out with some success using computer simulation. However, the simplified models used in these studies did little to expose the true transient nature of the handling problem created by a blown tire. New developments in vehicle simulation technology have made possible the detailed analysis of transient vehicle behavior during and after a blow-out. This paper presents the results of an experimental blow-out study with a comparison to computer simulations. In the experiments, a vehicle was driven under steady state conditions and a blow-out was induced at the right rear tire. Various driver steering and braking inputs were attempted, and the vehicle response was recorded. These events were then simulated using EDVSM. A comparison between experimental and simulated results is presented.
X