Refine Your Search

Topic

Search Results

Standard

Standard Specification for Allowable Defects in Rolled Goods for Interior Trim

2014-01-02
WIP
J3064
1.1 This specification is written for rolled goods used for trim sets for automotive seats. Face materials are textiles and plastic goods. This specification covers material rolled goods with and without foam or backing adhered to the face material 1.2 Units shall be SI. 1.3 This standard does not purport to address all of the safety concerns, is any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard

Seam Damage Test Procedure

2008-05-02
HISTORICAL
J1531_200805
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
Standard

Seam Damage Test Procedure

2014-05-20
CURRENT
J1531_201405
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
Standard

Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials

2019-06-05
WIP
J1767
The practice described applies to textile and flexible plastic parts and materials used in automotive vehicles. Special care should be taken when high pile carpet samples are being evaluated. The intent of this SAE Recommended Practice is to specify procedures for the instrumental measurement of color differences brought about by the exposure of textile and flexible plastic automotive parts to various colorfastness tests. It may be used for the specification of limits of color differences which may be tolerated in a specific test.
Standard

Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials

1995-01-01
HISTORICAL
J1767_199501
The practice described applies to textile and flexible plastic parts and materials used in automotive vehicles. Special care should be taken when high pile carpet samples are being evaluated. The intent of this SAE Recommended Practice is to specify procedures for the instrumental measurement of color differences brought about by the exposure of textile and flexible plastic automotive parts to various colorfastness tests. It may be used for the specification of limits of color differences which may be tolerated in a specific test.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus

2002-09-06
HISTORICAL
J2020_200209
This test method specifies the operating conditions for a fluorescent ultraviolet (UV) and condensation apparatus used for the accelerated exposure of various automotive exterior components. Specimen preparation, test duration, and performance evaluation procedures are addressed by each automotive manufacturerÕs material specifications. This SAE Standard may involve hazardous materials, operations, and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of whoever uses this document to consult and establish appropriate and health practices and determine the applicability of regulatory limitations prior to use. Significance and Use This test method is designed to simulate extreme environmental conditions encountered on the outside of an automobile due to sunlight, heat, and to provide an acceleration of exposure for the purpose of predicting the performance of exterior automotive materials.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus

1989-06-01
HISTORICAL
J2020_198906
This test method specifies the operating conditions for a fluorescent ultraviolet (UV) and condensation apparatus used for the accelerated exposure of various automotive exterior components. Specimen preparation, test duration, and performance evaluation procedures are addressed by each automotive manufacturerÕs material specifications. This SAE Standard may involve hazardous materials, operations, and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of whoever uses this document to consult and establish appropriate and health practices and determine the applicability of regulatory limitations prior to use. Significance and Use This test method is designed to simulate extreme environmental conditions encountered on the outside of an automobile due to sunlight, heat, and to provide an acceleration of exposure for the purpose of predicting the performance of exterior automotive materials.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus

1994-01-01
HISTORICAL
J2019_199401
This SAE Standard specifies the operating procedures for a controlled irradiance, air-cooled xenon-arc apparatus used for the accelerated exposure of various automotive exterior materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus

2012-11-19
CURRENT
J2019_201211
This SAE Standard specifies the operating procedures for a controlled irradiance, air-cooled xenon-arc apparatus used for the accelerated exposure of various automotive exterior materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent Uv and Condensation Apparatus

1995-05-01
HISTORICAL
J2020_199505
This test method specifies the operating conditions for a fluorescent ultraviolet (UV) and the condensation apparatus used for the accelerated exposure of various automotive exterior components. The sample preparation, test, duration, and performance evaluation procedures are addressed by each automotive manufacturer's material specifications. This SAE Standard may involve hazardous materials, operations, and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of whoever uses this document to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. This test method is designed to simulate extreme environmental conditions encountered on the outside of an automobile due to sunlight, heat, and humidity and to provide an acceleration of exposure for the purpose of predicting the performance of exterior automotive materials.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus

2001-11-16
HISTORICAL
J1960_200111
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon arc apparatus used for the accelerated exposure of various automotive materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus

1989-06-01
HISTORICAL
J1960_198906
This test method specifies the operating procedures for a controlled irradiance, water cooled xenon arc apparatus used for the accelerated exposure of various automotive materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers.
X