Refine Your Search

Date

Date

Topic

Topic

Environment Textile and Flexible Plastics Committee Lasers

Search Results

Viewing 1 to 20 of 121
123Next >Last >>
Sort by published
Standard

DYNAMIC FLEX FATIGUE TEST FOR SLAB POLYURETHANE FOAM
1969-03-01
HISTORICAL
J388_196903
This SAE Recommended Practice describes a laboratory test procedure for evaluating the loss of thickness and the amount of structural breakdown of slab polyurethane foam seating materials. A test specimen is measured for thickness under a specified load and subsequently subjected simultaneously to compressive and shear deformation in a controlled atmosphere. This is accomplished by subjecting the foam to a rolling shearing action under a constant load for a specified number of cycles. Specimen thickness under a constant load is obtained after a 1 hr recovery period following dynamic fatigue to determine loss in foam thickness.
Standard

Seam Damage Test Procedure
2008-05-02
HISTORICAL
J1531_200805
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
Standard

Seam Damage Test Procedure
2014-05-20
HISTORICAL
J1531_201405
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
Standard

Seam Damage Test Procedure
2022-09-14
CURRENT
J1531_202209
This procedure is used to determine seam strength and seam fatigue of automotive textiles, vinyl coated fabrics and related soft trim materials.
Standard

Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Air-Cooled Xenon-Arc Apparatus
2012-11-19
CURRENT
J2019_201211
This SAE Standard specifies the operating procedures for a controlled irradiance, air-cooled xenon-arc apparatus used for the accelerated exposure of various automotive exterior materials. The sample preparation, test durations, and performance evaluation procedures are covered in material specifications of the different automotive manufacturers.
Standard

LOAD DEFLECTION TESTING OF URETHANE FOAMS FOR AUTOMOTIVE SEATING
1994-01-01
HISTORICAL
J815_199401
Cellular foam products have been traditionally checked for load deflection by determining the load required to effect a 25% deflection. In seating, on the other hand, the interest is in determining how thick the padding is under the average passenger load (a measurement of padding left for "ride" and seated height), a second measurement to give an indication of initial softness, and a final figure to indicate resiliency. To most easily fulfill these requirements, load deflection on flexible urethane foams for automotive seating is determined here by measuring the thickness of the pad under fixed loads of 1 lb, 25 lb, and 50 lb on a 50 in2 circular indentor foot.
Standard

Load Deflection Testing of Urethane Foams for Automotive Seating
2007-08-13
HISTORICAL
J815_200708
Traditionally, cellular foam products have been checked for load deflection by determining the load required to cause a 25% deflection. In automotive seating, on the other hand, the load deflection is checked by determining the thickness under constant force conditions to (a) indicate the initial softness of the seat cushion, (b) measure how thick the seat cushion is under the average passenger load (a measurement of padding left for “ride” and seated height), and (c) determine a value to indicate resiliency. In this method these measurements are made by determining the thickness of the seat cushion under fixed loads of 4.5 N, 110 N, and 220 N with a 323 cm2 circular indentor foot.
Standard

Load Deflection Testing of Urethane Foams for Automotive Seating
2002-10-30
HISTORICAL
J815_200210
Traditionally, cellular foam products have been checked for load deflection by determining the load required to cause a 25% deflection. In automotive seating, on the other hand, the load deflection is checked by determining the thickness under constant force conditions to (a) indicate the initial softness of the seat cushion, (b) measure how thick the seat cushion is under the average passenger load (a measurement of padding left for “ride” and seated height), and (c) determine a value to indicate resiliency. In this method these measurements are made by determining the thickness of the seat cushion under fixed loads of 4.5 N, 110 N, and 220 N with a 323 cm 2 circular indentor foot.
Standard

Load Deflection Testing of Urethane Foams for Automotive Seating
1998-06-01
HISTORICAL
J815_199806
Cellular foam products have been traditionally checked for load deflection by determining the load required to effect a 25% deflection. In seating, on the other hand, the interest is in determining how thick the padding is under the average passenger load (a measurement of padding left for "ride" and seated height), a second measurement to give an indication of initial softness, and a final figure to indicate resiliency. To most easily fulfill these requirements, load deflection on flexible urethane foams for automotive seating is determined here by measuring the thickness of the pad under fixed loads of 1 lb, 25 lb, and 50 lb on a 50 in2 circular indentor foot.
Standard

Load Deflection Testing of Urethane Foams for Automotive Seating
2001-12-10
HISTORICAL
J815_200112
Traditionally, cellular foam products have been checked for load deflection by determining the load required to cause a 25% deflection. In automotive seating, on the other hand, the load deflection is checked by determining the thickness under constant force conditions to (a) indicate the initial softness of the seat cushion, (b) measure how thick the seat cushion is under the average passenger load (a measurement of padding left for “ride” and seated height), and (c) determine a value to indicate resiliency. In this method these measurements are made by determining the thickness of the seat cushion under fixed loads of 4.5 N, 110 N, and 220 N with a 323 cm 2 circular indentor foot.
123Next >Last >>
X