Refine Your Search

Search Results

Standard

Labeling Air Brake Valves with Their Performance (Input-Output) characteristics

2011-05-16
HISTORICAL
J1860_201105
This SAE Recommended Practice applies to those air brake system valves used to control the vehicle service brakes and test procedures defined by SAE J1859 to measure performance characteristics. This Recommended Practice adheres to standard industry practice of using English units for specifying valve characteristics.
Standard

Labeling Air Brake Valves with Their Performance (Input-Output) Characteristics

2016-06-14
CURRENT
J1860_201606
This SAE Recommended Practice applies to those air brake system valves used to control the vehicle service brakes and test procedures defined by SAE J1859 to measure performance characteristics. This Recommended Practice adheres to standard industry practice of using English units for specifying valve characteristics.
Standard

Air Brake Valve Input-Output Characteristic Requirements

2011-09-12
HISTORICAL
J1861_201109
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements

2016-06-17
CURRENT
J1861_201606
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Test Procedure for Air Reservoir Capacity--Highway Type Vehicles

2002-08-23
HISTORICAL
J1911_200208
This SAE Recommended Practice provides instructions and test procedures for air braked vehicles including but not limited to trucks, truck-tractors, trailers, dollies, and buses used on highways but does not include off-highway vehicles. This document provides a method of determining the air reservoir capacity of highway type vehicles using compressed air to actuate or transmit actuation power to the foundation brakes. Air reservoir capacity is the ability to provide adequate brake pressure after a number of brake applications.
Standard

Test Procedure for Air Reservoir Capacity--Highway Type Vehicles

2003-06-18
HISTORICAL
J1911_200306
This SAE Recommended Practice provides instructions and test procedures for air braked vehicles including but not limited to trucks, truck-tractors, trailers, dollies, and buses used on highways but does not include off-highway vehicles. Purpose This document provides a method of determining the air reservoir capacity of highway type vehicles using compressed air to actuate or transmit actuation power to the foundation brakes. Air reservoir capacity is the ability to provide adequate brake pressure after a number of brake applications.
Standard

Test Procedure for Air Reservoir Capacity--Highway Type Vehicles

1997-05-01
HISTORICAL
J1911_199705
This SAE Recommended Practice provides instructions and test procedures for air braked vehicles including but not limited to trucks, truck-tractors, trailers, dollies, and buses used on highways but does not include off-highway vehicles. This document provides a method of determining the air reservoir capacity of highway type vehicles using compressed air to actuate or transmit actuation power to the foundation brakes. Air reservoir capacity is the ability to provide adequate brake pressure after a number of brake applications.
Standard

Test Procedure for Air Reservoir Capacity--Truck and Bus

1990-09-01
HISTORICAL
J1911_199009
This SAE Recommended Practice provides instructions and test procedures for air braked vehicles including but not limited to trucks, truck-tractors, trailers, dollies, and buses used on highways but does not include off-highway vehicles. Purpose This document provides a method of determining the air reservoir capacity of highway type vehicles using compressed air to actuate or transmit actuation power to the foundation brakes. Air reservoir capacity is the ability to provide adequate brake pressure after a number of brake applications.
Standard

Test Procedure for Air Reservoir Capacity--Truck and Bus

2009-11-02
HISTORICAL
J1911_200911
This SAE Recommended Practice provides instructions and test procedures for air braked vehicles including but not limited to trucks, truck-tractors, trailers, dollies, and buses used on highways but does not include off-highway vehicles. Purpose This document provides a method of determining the air reservoir capacity of highway type vehicles using compressed air to actuate or transmit actuation power to the foundation brakes. Air reservoir capacity is the ability to provide adequate brake pressure after a number of brake applications.
Standard

Test Procedure for Air Reservoir Capacity - Truck and Bus

2014-02-05
CURRENT
J1911_201402
This SAE Recommended Practice provides instructions and test procedures for air braked vehicles including but not limited to trucks, truck-tractors, trailers, dollies, and buses used on highways but does not include off-highway vehicles.
Standard

Air Reservoir Capacity Performance Guide—Trucks and Buses

2014-10-09
HISTORICAL
J1609_201410
This SAE Recommended Practice establishes performance guidelines of the air reservoir systems used on trucks, towing trucks, truck-tractors, trailers, and converter dollies with GVWRs over 10 000 lb designed to be used on the highway. NOTE: Compliance with this document does not guarantee compliance with the air reservoir requirements of FMVSS 121.
Standard

Air Brake Valve - Performance Requirements

2011-02-18
HISTORICAL
J1410_201102
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valve - Performance Requirements

2016-07-20
CURRENT
J1410_201607
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a Input-output performance b Leakage characteristics c Low temperature performance d Elevated temperature performance e Corrosion resistance performance f Endurance testing g Structural integrity
Standard

Air Brake Valve - Performance Requirements

2020-05-13
WIP
J1410
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a. Input-output performance b. Leakage characteristics c. Low temperature performance d. Elevated temperature performance e. Corrosion resistance performance f. Endurance testing g. Structural integrity
Standard

Air Brake Valves Test Procedure

2020-05-13
WIP
J1409
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a. Input-Output Performance b. Leakage Characteristics c. Low Temperature Evaluation d. Elevated Temperature Evaluation e. Corrosion Resistance Evaluation f. Endurance Testing g. Structural Integrity h. Vibration Testing
X