Refine Your Search

Search Results

Standard

Air Dryer Test Procedure

2012-11-09
CURRENT
J2384_201211
This SAE Recommended Practice establishes uniform Test Procedures for desiccant Air Dryers used in vehicles with compressed air systems per SAE J2383. Continuous flow desiccant Air Dryers are excluded from the scope of this document.
Standard

Air Dryer Installation Procedure

2017-11-15
CURRENT
J2383_201711
This SAE Recommended Practice establishes uniform Installation Parameters for desiccant Air Dryers for vehicles with compressed air systems.
Standard

Air Dryer Installation Procedure

2012-06-04
HISTORICAL
J2383_201206
This SAE Recommended Practice establishes uniform Installation Parameters for desiccant Air Dryers for vehicles with compressed air systems.
Standard

Labeling Air Brake Valves with Their Performance (Input-Output) characteristics

2011-05-16
HISTORICAL
J1860_201105
This SAE Recommended Practice applies to those air brake system valves used to control the vehicle service brakes and test procedures defined by SAE J1859 to measure performance characteristics. This Recommended Practice adheres to standard industry practice of using English units for specifying valve characteristics.
Standard

Labeling Air Brake Valves with Their Performance (Input-Output) Characteristics

2003-04-25
HISTORICAL
J1860_200304
This SAE Recommended Practice applies to those air brake system valves used to control the vehicle service brakes and test procedures defined by SAE J1859 to measure performance characteristics. This Recommended Practice adheres to standard industry practice of using English units for specifying valve characteristics. Purpose The purpose of this document is to provide a means of identifying vehicle air brake system components with performance (input-output) characteristics. This labeling procedure intends to identify and facilitate proper in-service valve replacement. Nomenclature and test procedure are defined in either SAE J656 or SAE J1859 respectively.
Standard

Labeling Air Brake Valves with Their Performance (Input-Output) Characteristics

2016-06-14
CURRENT
J1860_201606
This SAE Recommended Practice applies to those air brake system valves used to control the vehicle service brakes and test procedures defined by SAE J1859 to measure performance characteristics. This Recommended Practice adheres to standard industry practice of using English units for specifying valve characteristics.
Standard

Air Brake Valve Input-Output Characteristic Requirements

2001-09-13
HISTORICAL
J1861_200109
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: A. Crack (opening) pressure or force b. Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements

2007-01-19
HISTORICAL
J1861_200701
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: A. Crack (opening) pressure or force b. Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements

2016-06-17
CURRENT
J1861_201606
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Brake Valve Input-Output Characteristic Requirements

2011-09-12
HISTORICAL
J1861_201109
This SAE Recommended Practice establishes minimum tolerance requirements for pilot operated and mechanically actuated modulating type valves, and through type valves used in the service brake control system when tested in accordance with the test procedure outlined in SAE J1859. This document applies to the nominal input-output characteristics as specified by vehicle original equipment manufacturer and labeled by the valve manufacturer as outlined in SAE J1860. The tolerance requirements will include: a Crack (opening) pressure or force. Crack pressure may be measured at the initial output pressure or as the pressure differential before output pressure exceeds 14 kPa (2 psi). Crack force may be measured at initial output pressure or before output pressure exceeds 14 kPa (2 psi). b Pressure differential (input-output)
Standard

Air Compressor Size Rating Recommended Practice - Truck and Bus

2007-09-11
HISTORICAL
J2743_200709
This SAE Recommended Practice is intended to describe a procedure for rating the size of single-stage reciprocating air compressors. It describes the conditions that can be used for testing and it defines a standardized rating expressed in SLPM (SCFM).
Standard

Air Compressor Size Rating Recommended Practice - Truck and Bus

2017-04-27
CURRENT
J2743_201704
This SAE Recommended Practice is intended to describe a procedure for rating the size of single-stage reciprocating air compressors. It describes the conditions that can be used for testing and it defines a standardized rating expressed in SLPM (SCFM).
Standard

Air Compressor Size Rating Recommended Practice - Truck and Bus

2012-07-02
HISTORICAL
J2743_201207
This SAE Recommended Practice is intended to describe a procedure for rating the size of single-stage reciprocating air compressors. It describes the conditions that can be used for testing and it defines a standardized rating expressed in SLPM (SCFM).
Standard

Air Dryer Installation Procedure

2004-01-09
HISTORICAL
J2383_200401
The SAE Recommended Practice establishes uniform Installation Parameters for desiccant Air Dryers for vehicles with compressed air systems.
Standard

Air Brake Valves Test Procedure

2016-07-20
CURRENT
J1409_201607
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing
Standard

Air Brake Valves Test Procedure

2011-02-04
HISTORICAL
J1409_201102
This SAE Recommended Practice establishes uniform test procedures for air brake systems pneumatic valves with respect to: a Input-Output Performance b Leakage Characteristics c Low Temperature Evaluation d Elevated Temperature Evaluation e Corrosion Resistance Evaluation f Endurance Testing g Structural Integrity h Vibration Testing
Standard

Air Brake Valve--Performance Requirements

1998-09-01
HISTORICAL
J1410_199809
This SAE Recommended Practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: The document establishes uniform performance requirements for pneumatic valves designed to operate at 862 kPa (125 psi) nominal pressure in commercial air brake vehicles. a. Input - output performance b. Leakage test c. Low temperature performance d. Elevated temperature performance e. Corrosion resistance performance f. Endurance testing g. Structural integrity
Standard

Air Brake Valve - Performance Requirements

1986-07-01
HISTORICAL
J1410_198607
This SAE Recommended Practice establishes minimum performance requirements for new pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: a. Input-output performance b. Leakage characteristics c. Low temperature performance d. Elevated temperature performance e. Corrosion resistance performance f. Endurance testing g. Structural integrity
Standard

Air Brake Valve--Performance Requirements

1986-10-01
HISTORICAL
J1410_198610
This recommended practice establishes uniform performance requirements for pneumatic valves designed to operate at 125 psi nominal pressure in commercial air brake vehicles. This practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: Input - output performance, Leakage test, Low temperature performance, Elevated temperature performance, Corrosion resistance performance, Endurance testing, and Structural integrity.
Standard

Air Brake Valve--Performance Requirements

2004-05-10
HISTORICAL
J1410_200405
This SAE Recommended Practice establishes minimum performance requirements for pneumatic valves when tested in accordance with the test procedure outlined in SAE J1409. The performance requirements will include: The document establishes uniform performance requirements for pneumatic valves designed to operate at 862 kPa (125 psi) nominal pressure in commercial air brake vehicles. a. Input - output performance b. Leakage test c. Low temperature performance d. Elevated temperature performance e. Corrosion resistance performance f. Endurance testing g. Structural integrity
X