Refine Your Search

Topic

Search Results

Standard

Recommended Practices for LNG Powered Heavy-Duty Trucks

1997-01-01
HISTORICAL
J2343_199701
This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered heavy-duty trucks. The purpose of this document is to establish a uniform practice for construction, operation, and maintenance of LNG powered trucks and is subject to change to keep pace with experience and technical advances. The revised Failure Modes and Effect Analysis which reflects the influence of this document is a separate document that is not part of this document but which is added as an informative appendix.
Standard

Torque Ratings for Power Take-off Mounting Pads

2003-07-25
HISTORICAL
J2662_200307
This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.
Standard

Torque Ratings for Power Take-off Mounting Pads

2017-09-19
CURRENT
J2662_201709
This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.
Standard

Truck Ability Prediction Procedure

1987-08-01
HISTORICAL
J688_198708
The procedure has been developed to provide a practical method for the prediction of truck performance using accepted data. It Is designed to help anyone concerned with the problem of truck selection. By following directions, it is possible to determine the necessary information for intelligent truck selection without being concerned with the origin or derivation of the complex factors involved. With readily available specification of a truck, information provided in the tables, and minimum of calculation, it is possible to predict: (a) The performance obtainable from a truck of given characteristics under given operating conditions. (b) The characteristics required in a truck to meet different performance requirements under given operating conditions. This report comprises a procedure form and 10 tables of data.
Standard

Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-Offs

1978-04-01
HISTORICAL
J704B_197804
The accompanying mounting and gear locations are applicable for all general installations of power take-off on the transmission gear box of motor trucks and tractors where the size of the transmission permits. The heavy-duty type opening can be adapted to the regular-duty type by the use of an adapter with 6.35 mm (0.25 in) flange thickness with appropriate bolt pattern and thread engagement. (See Figures 1 and 2.)
Standard

Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-Offs

2017-11-03
CURRENT
J704_201711
The accompanying mounting and gear locations are applicable for all general installations of power take-off on the transmission gear box of motor trucks and tractors where the size of the transmission permits. The heavy-duty type opening can be adapted to the regular-duty type by the use of an adapter with 6.35 mm (0.25 in) flange thickness with appropriate bolt pattern and thread engagement. (See Figures 1 and 2.)
Standard

Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-Offs

1983-06-01
HISTORICAL
J704_198306
The accompanying mounting and gear locations are applicable for all general installations of power take-off on the transmission gear box of motor trucks and tractors where the size of the transmission permits. The heavy-duty type opening can be adapted to the regular-duty type by the use of an adapter with 6.35 mm (0.25 in) flange thickness with appropriate bolt pattern and thread engagement. (See Figures 1 and 2.)
Standard

Openings for Six- and Eight-Bolt Truck Transmission Mounted Power Take-Offs

2000-09-07
HISTORICAL
J704_200009
The accompanying mounting and gear locations are applicable for all general installations of power take-off on the transmission gear box of motor trucks and tractors where the size of the transmission permits. The heavy-duty type opening can be adapted to the regular-duty type by the use of an adapter with 6.35 mm (0.25 in) flange thickness with appropriate bolt pattern and thread engagement. (See Figures 1 and 2.)
Standard

Certificates of Maximum Net Horsepower for Motor Trucks and Truck Tractors

1965-02-01
HISTORICAL
J690_196502
[In the report of the SAE Motor Truck Rating Committee on Ability Ratings published in the January 1940 issue of the SAE Journal, it was recommended that pounds per certified net brake horsepower delivered to the clutch or its equivalent be used as the index of the potential ability of a motor truck or combination. This report defined the term "certified net brake horsepower" in detail and recommended that certain data be provided to support the certification. The accompanying forms provide a method for the presentation of the data specified.]
Standard

Certificates of Maximum Net Horsepower for Motor Trucks and Truck Tractors

1998-11-06
CURRENT
J690_199811
[In the report of the SAE Motor Truck Rating Committee on Ability Ratings published in the January 1940 issue of the SAE Journal, it was recommended that pounds per certified net brake horsepower delivered to the clutch or its equivalent be used as the index of the potential ability of a motor truck or combination. This report defined the term "certified net brake horsepower" in detail and recommended that certain data be provided to support the certification. The accompanying forms provide a method for the presentation of the data specified.]
Standard

Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs

1983-11-01
HISTORICAL
J772_198311
The purpose of this document is to provide dimensions of clearance envelopes for various types of six-bolt regular-duty, eight-bolt heavy-duty, and side- and rear-mounted truck transmission power takeoffs. These envelopes are applicable to the clearance required immediately adjacent to the power takeoff openings on truck transmissions. Clearance envelopes are provided for the purpose of documenting current practice. It must be recognized that many current designs do not provide these clearances in all orientations and variations. New transmission and power takeoff designs should attempt to adhere to these envelopes where practical, but they should not be construed to be design restrictive; ultimately, the actual power takeoff clearance must be established for each application. In order to provide realistic envelope sizes, there are seven basic ÒtypesÓ of side-mounted P.T.O. envelopes and rear-mounted envelopes as shown in Table 1.
Standard

Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs

1978-11-01
HISTORICAL
J772A_197811
The purpose of this document is to provide dimensions of clearance envelopes for various types of six-bolt regular-duty, eight-bolt heavy-duty, and side- and rear-mounted truck transmission power takeoffs. These envelopes are applicable to the clearance required immediately adjacent to the power takeoff openings on truck transmissions. Clearance envelopes are provided for the purpose of documenting current practice. It must be recognized that many current designs do not provide these clearances in all orientations and variations. New transmission and power takeoff designs should attempt to adhere to these envelopes where practical, but they should not be construed to be design restrictive; ultimately, the actual power takeoff clearance must be established for each application. In order to provide realistic envelope sizes, there are seven basic ÒtypesÓ of side-mounted P.T.O. envelopes and rear-mounted envelopes as shown in Table 1.
Standard

Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs

2000-09-07
HISTORICAL
J772_200009
The purpose of this document is to provide dimensions of clearance envelopes for various types of six-bolt regular-duty, eight-bolt heavy-duty, and side- and rear-mounted truck transmission power takeoffs. These envelopes are applicable to the clearance required immediately adjacent to the power takeoff openings on truck transmissions. Clearance envelopes are provided for the purpose of documenting current practice. It must be recognized that many current designs do not provide these clearances in all orientations and variations. New transmission and power takeoff designs should attempt to adhere to these envelopes where practical, but they should not be construed to be design restrictive; ultimately, the actual power takeoff clearance must be established for each application. In order to provide realistic envelope sizes, there are seven basic ÒtypesÓ of side-mounted P.T.O. envelopes and rear-mounted envelopes as shown in Table 1.
Standard

Clearance Envelopes for Six-Bolt, Eight-Bolt, and Rear Truck Transmission Mounted Power Takeoffs

1992-12-01
HISTORICAL
J772_199212
The purpose of this document is to provide dimensions of clearance envelopes for various types of six-bolt regular-duty, eight-bolt heavy-duty, and side- and rear-mounted truck transmission power takeoffs. These envelopes are applicable to the clearance required immediately adjacent to the power takeoff openings on truck transmissions. Clearance envelopes are provided for the purpose of documenting current practice. It must be recognized that many current designs do not provide these clearances in all orientations and variations. New transmission and power takeoff designs should attempt to adhere to these envelopes where practical, but they should not be construed to be design restrictive; ultimately, the actual power takeoff clearance must be established for each application. In order to provide realistic envelope sizes, there are seven basic ÒtypesÓ of side-mounted P.T.O. envelopes and rear-mounted envelopes as shown in Table 1.
X