Refine Your Search

Search Results

Standard

Disc Wheel/Hub Or Drum Interface Dimensions- Commercial Vehicles

1997-07-01
HISTORICAL
J694_199707
This SAE Recommended Practice defines wheel mounting systems and documents, the dimensions and tolerances necessary to maintain serviceability, and interchangeability in the interface areas. To be consistent with ISO, it is divided into two sections (I & II). Section I is in concert with ISO 4107, describing mounting systems currently used internationally and nominated for, or included in, the international standards for bolt circle interfaces. Section II records information on current mounting systems also used in North America. Components of different mounting systems with common bolt patterns could be mis-assembled together and cause service problems. Therefore, it is important to note that each mounting system should be treated individually and their components not be intermixed.
Standard

Disc Wheel/Hub or Drum Interface Dimensions--Truck and Bus

1988-05-01
HISTORICAL
J694_198805
This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document. This document defines wheel mounting systems and documents the dimensions and tolerances necessary to maintain serviceability, and interchangeability in the interface areas. To be consistent with ISO, it is divided into two sections (I and II). Section I is in concert with ISO 4107, describing mounting systems currently used internationally and nominated for, or included in, the international standard for bolt circle interfaces. Section II records information on current mounting systems also used in North America. Components of different mounting systems with common bolt patterns could be mis-assembled together and cause service problems.
Standard

Disc Wheel and Hub or Drum Interface Dimensions - Truck and Bus

2018-03-23
WIP
J694
This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for truck and bus applications. Disc wheels designed only for single wheel applications (not dual wheels) for light trucks and special or less common applications are not covered in this document.
Standard

Disc Wheel/Hub or Drum Interface Dimensions--Truck and Bus

1988-09-01
HISTORICAL
J694_198809
This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document. This document defines wheel mounting systems and documents the dimensions and tolerances necessary to maintain serviceability, and interchangeability in the interface areas. To be consistent with ISO, it is divided into two sections (I and II). Section I is in concert with ISO 4107, describing mounting systems currently used internationally and nominated for, or included in, the international standard for bolt circle interfaces. Section II records information on current mounting systems also used in North America. Components of different mounting systems with common bolt patterns could be mis-assembled together and cause service problems.
Standard

Disc Wheel and Hub or Drum Interface Dimensions - Truck and Bus

2015-05-12
CURRENT
J694_201505
This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for truck and bus applications. Disc wheels designed only for single wheel applications (not dual wheels) for light trucks and special or less common applications are not covered in this document.
Standard

Disc Wheel/Hub or Drum Interface Dimensions—Truck and Bus

2007-06-21
HISTORICAL
J694_200706
This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document.
Standard

Disc Wheel/Hub or Drum Interface Dimensions--Commercial Vehicles

2001-02-22
HISTORICAL
J694_200102
This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document. Purpose This document defines wheel mounting systems and documents, the dimensions and tolerances necessary to maintain serviceability, and interchangeability in the interface areas. To be consistent with ISO, it is divided into two sections (I & II). Section I is in concert with ISO 4107, describing mounting systems currently used internationally and nominated for, or included in, the international standard for bolt circle interfaces. Section II records information on current mounting systems also used in North America. Components of different mounting systems with common bolt patterns could be mis-assembled together and cause service problems.
Standard

Disc Wheel/Hub or Drum Interface Dimensions--Commercial Vehicles

1998-08-01
HISTORICAL
J694_199808
This SAE Recommended Practice contains dimensions and their tolerances concerning disc wheel to hub or drum interface areas for commercial vehicles and multipurpose passenger vehicles. Stamped disc wheels for single applications and special or less common applications are not covered in this document. This document defines wheel mounting systems and documents, the dimensions and tolerances necessary to maintain serviceability, and interchangeability in the interface areas. To be consistent with ISO, it is divided into two sections (I & II). Section I is in concert with ISO 4107, describing mounting systems currently used internationally and nominated for, or included in, the international standard for bolt circle interfaces. Section II records information on current mounting systems also used in North America. Components of different mounting systems with common bolt patterns could be mis-assembled together and cause service problems.
Standard

Wheel End Assembly and Axle Spindle Interface Dimensions - Truck and Bus

2014-07-30
CURRENT
J2475_201407
This recommended practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include axle spindle, bearing cones, bearing spacer, seal and wheel hub. This recommended practice is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, FL, I80, L, N, P, R, U, and W.
Standard

Road VehiclesÑWheels for Commercial Vehicles and Multipurpose Passenger VehiclesÑFixing NutsÑTest Methods

2003-06-13
HISTORICAL
J1965_200306
This SAE Recommended Practice applies to nuts as specified in SAE J694 and J1835 used for wheel and demountable rim attachment. Only the test methods necessary to assure proper wheel or rim assembly are specified. Fasteners for less common and special applications are not included. Purpose This document, to ensure proper assemblies, specifies test methods for Metric or English, one- or two-piece flange nuts, single ball seat nuts, inner and outer ball seat nuts, and rim clamp nuts.
Standard

Road Vehicles--Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles--Fixing Nuts--Test Methods

1993-02-01
HISTORICAL
J1965_199302
This SAE Recommended Practice applies to nuts as specified in SAE J694 and J1835 used for wheel and demountable rim attachment. Only the test methods necessary to assure proper wheel or rim assembly are assembly are specified. Fasteners for less common and special applications are not included. This document, to ensure proper assemblies, specifies test methods for metric or english, one- or two-piece flange nuts, single ball seat nuts, inner and outer ball seat nuts, and rim clamp nuts.
Standard

Wheel End Assembly and Axle Spindle Interface Dimensions--Truck and Bus

2005-03-21
HISTORICAL
J2475_200503
This SAE Recommended Practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include bearing cones, bearing spacers, and wheel hubs. This document is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, R, N, and P. SAE configurations FC, FL, K, L, U, and W are not included, but may be added in the future. The purpose of this document is to establish dimensional guidelines to promote a functional standardization of spindle dimensions wheel end assemblies. Proper hub component dimensions can then be established.
Standard

Wheel End Assembly and Axle Spindle Interface Dimensions--Truck and Bus

2018-05-02
WIP
J2475

This recommended practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include axle spindle, bearing cones, bearing spacer, seal and wheel hub. This recommended practice is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, FL, I80, L, N, P, R, U, and W.

Standard

Wheel End Assembly and Axle Spindle Interface Dimensions—Truck and Bus

2008-08-22
HISTORICAL
J2475_200808
This recommended practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include axle spindle, bearing cones, bearing spacer, seal and wheel hub. This recommended practice is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, FL, I80, L, U, W, R, N and P.
Standard

Wheel End Assembly and Axle Spindle Interface Dimensions--Truck and Bus

2000-01-24
HISTORICAL
J2475_200001
This SAE Recommended Practice contains dimensions and tolerances for spindles in the interface area. Interfacing components include bearing cones, bearing spacers, and wheel hubs. This document is intended for axles commonly used on Class 7 and 8 commercial vehicles. Included are SAE axle configurations FF, R, N, and P. SAE configurations FC, FL, K, L, U, and W are not included, but may be added in the future. The purpose of this document is to establish dimensional guidelines to promote a functional standardization of spindle dimensions wheel end assemblies. Proper hub component dimensions can then be established.
Standard

Nomenclature—Wheels, Hubs, and Rims for Commercial Vehicles

2001-07-16
HISTORICAL
J393_200107
This SAE Recommended Practice establishes uniform engineering nomenclature for wheels, hubs, rims, and their components used in truck, bus, and trailer applications. This nomenclature and accompanying drawings are intended to define functional truck wheel, hub, and rim designs. The International Standard (ISO) nomenclature is shown in parentheses when different than SAE J393.
X