Refine Your Search

Date

Date

Topic

Topic

Tests and Testing Vehicle E E System Diagnostic Standards Committee Parts and Components

Search Results

Viewing 1 to 20 of 30
12Next >Last >>
Sort by published
Standard

SAE J2450 Supplemental Training Document
2019-10-31
CURRENT
J2450/1_201910
This supplement, which is a living document, is meant to provide both clients and translation suppliers with some suggestions for integrating SAE J2450 into their business practices. It is intended for the use of clients, trainers who wish to develop new evaluators, and those who wish to self-train.
Standard

SAE J2450 Supplemental Training Document
2008-05-13
HISTORICAL
J2450/1_200805
This supplement, which is a living document, is meant to provide both clients and translation suppliers with some suggestions for integrating SAE J2450 into their business practices. It is intended for the use of clients, trainers who wish to develop new evaluators, and those who wish to self-train.
Standard

Enhanced E/E Diagnostic Test Modes
2008-10-02
CURRENT
J2190_200810
This SAE Recommended Practice describes the implementation of Enhanced Diagnostic Test Modes, which are intended to supplement the legislated Diagnostic Test Modes defined in SAE J1979. Modes are defined for access to emission related test data beyond what is included in SAE J1979, and for non-emission related data. This document describes the data byte values for diagnostic messages transmitted between diagnostic test equipment, either on-vehicle or off-vehicle, and vehicle electronic control modules. No distinction is made between test modes for emission related and non-emission related diagnostics. These messages can be used with a diagnostic serial data link such as described in SAE J1850 or ISO 9141-2. For each test mode, this document includes a functional description of the test mode, request and report message data byte content, and an example if useful for clarification.
Standard

Translation Quality Metric
2005-08-22
HISTORICAL
J2450_200508
This SAE Standard is applicable to translations of automotive service information into any target language. The metric may be applied regardless of the source language or the method of translation (i.e., human translation, computer assisted translation or machine translation). Note that the current version of the metric does not measure errors in style, making it unsuitable for evaluations of material in which style is important (e.g., owner's manuals or marketing literature). The metric can be expanded to accommodate style and other requirements of particular new media.
Standard

Translation Quality Metric
2016-08-17
CURRENT
J2450_201608
This SAE Standard is applicable to translations of automotive service information into any target language. The metric may be applied regardless of the source language or the method of translation (i.e., human translation, computer assisted translation or machine translation). Note that the current version of the metric does not measure errors in style, making it unsuitable for evaluations of material in which style is important (e.g., owner's manuals or marketing literature). The metric can be expanded to accommodate style and other requirements of particular new media.
Standard

SAE J1850 Verification Test Procedures
2021-07-16
CURRENT
J1699/1_202107
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using the SAE J1850. This document only verifies the portion of SAE J1850 that is used for OBD-II communications. The term “test tool” is synonymous with OBD-II Scan tool.
Standard

SAE J1850 Verification Test Procedures
2006-06-05
HISTORICAL
J1699/1_200606
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using the SAE J1850. This document only verifies the portion of SAE J1850 that is used for OBD-II communications. The term “test tool” is synonymous with OBD-II Scan tool.
Standard

OBD-II Related SAE Specification Verification Test Procedures1
1998-01-01
HISTORICAL
J1699/2_199801
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using SAE J1962. These test procedures are to be used whenever SAE J1850 communication parameters need to be verified. However, all specific details for testing are not specified, e.g., sample size, environment, vibration, etc.
Standard

OBD-II Communications Anomaly List
2014-04-09
HISTORICAL
J1699/4_201404
To define a list of anomalies related to OBD Communications. Misinterpretations of various OBD Communications Standards and Recommended Practices have resulted in OBD “no-communications” situations in the field. This Information Report identifies the most prevalent of these.
Standard

Pass-Thru Extended Feature - Ethernet
2022-01-17
CURRENT
J2534-2/13_0500_202201
This SAE Recommended Practice is part of the SAE J2534-2/X_0500 set of documents that extends the SAE J2534-1_0500 API (version 05.00) specification, and defines how to implement ethernet within the SAE J2534 API framework. This document details only the changes from SAE J2534-1_0500 and items not specifically detailed in this document are assumed to have not changed. An SAE J2534-2/13_0500 interface shall be compliant to the ethernet feature only when all the required functionality in this SAE Recommended Practice is implemented. Any functionality not required for compliance will be specifically marked as “optional” in this document. This document must be used in conjunction with the SAE J2534-2/BA_0500 and SAE J2534-2/RE_0500 documents.
Standard

Pass-Thru Extended Features - Ethernet NDIS
2022-01-17
CURRENT
J2534-2/9_0500_202201
This SAE Recommended Practice is part of the SAE J2534-2/X_0500 set of documents that extends the SAE J2534-1_0500 API (version 05.00) specification, and defines how to implement ethernet NDIS within the SAE J2534 API framework. This document details only the changes from SAE J2534-1_0500 and items not specifically detailed in this document are assumed to have not changed. An SAE J2534-2/9_0500 interface shall be compliant to the ethernet NDIS feature only when all the required functionality in this Recommended Practice is implemented. Any functionality not required for compliance will be specifically marked as “optional” in this document. This document must be used in conjunction with the SAE J2534-2/BA_0500 and J2534-2/RE_0500 documents.
Standard

DIAGNOSTIC CONNECTOR
1994-06-01
HISTORICAL
J1962_199406
The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector (see Figure 1) and the test equipment connector (see Figure 2). This document: a Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assignments. b Defines the functional requirements for the test equipment connector. These functional requirements are separated into two principal areas: connector design and connector terminal assignments. The scope of this document does not include the needs of long-term retention, such as in-flight recorder type applications. To ensure long-term retention, additional steps outside of the scope of this document must be taken.
Standard

DIAGNOSTIC CONNECTOR
1993-06-01
HISTORICAL
J1962_199306
The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector (see Figure 1) and the test equipment connector (see Figure 2). This document: a Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assignments. b Defines the functional requirements for the test equipment connector. These functional requirements are separated into two principal areas: connector design and connector terminal assignments.
Standard

DIAGNOSTIC CONNECTOR
1992-06-01
HISTORICAL
J1962_199206
This SAE Recommended Practice: a Defines the functional requirements for a vehicle electrical/electronic diagnostic connector. These functional requirements are separated into two principal areas: connector location/access and connector design. b Establishes terminal assignments to conform to either of two categories: Standard or Manufacturer Discretionary. Rationale relative to intent is provided, where applicable, to minimize ambiguity.
Standard

Diagnostic Connector Equivalent to ISO/DIS 15031-3: December 14, 2001
2012-07-26
HISTORICAL
J1962_201207
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.
Standard

Diagnostic Connector
2015-09-11
HISTORICAL
J1962_201509
This document supersedes SAE J1962 200204, and is technically equivalent to ISO/DIS 15031-3: December 14, 2001. This document is intended to satisfy the requirements of an OBD connector as required by U.S. On-Board Diagnostic (OBD) regulations. The diagnostic connection specified in this document consists of two mating connectors, the vehicle connector and the external test equipment connector. This document specifies: a The functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits, b The functional requirements for the external test equipment connector. These functional requirements are separated into three principal areas: connector design, connector contact allocation, and electrical requirements for connector and related electrical circuits.
Standard

Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms
1998-05-01
HISTORICAL
J1930_199805
This SAE Recommended Practice is applicable to all light-duty gasoline and diesel passenger vehicles and trucks, and to heavy-duty gasoline vehicles. Specific applications of this document include diagnostic, service and repair manuals, bulletins and updates, training manuals, repair data bases, underhood emission labels, and emission certification applications. This document focuses on diagnostic terms applicable to electrical/electronic systems, and therefore also contains related mechanical terms, definitions, abbreviations, and acronyms. Even though the use and appropriate updating of this document is strongly encouraged, nothing in this document should be construed as prohibiting the introduction of a term, abbreviation, or acronym not covered by this document. Certain terms have already been in common use and are readily understood by manufacturers and technicians, but do not follow the methodology of this document.
Standard

Recommended Practice for Pass-Thru Vehicle Programming
2002-02-28
HISTORICAL
J2534_200202
This SAE Recommended Practice provides the framework to allow reprogramming software applications from all vehicle manufacturers the flexibility to work with multiple vehicle data link interface tools from multiple tool suppliers. This system enables each vehicle manufacturer to control the programming sequence for electronic control units (ECU’s) in their vehicles, but allows a single set of programming hardware and vehicle interface to be used to program modules for all vehicle manufacturers. This document does not limit the hardware possibilities for the connection between the PC used for the software application and the tool (e.g., RS-232, RS-485, USB, Ethernet…). Tool suppliers are free to choose the hardware interface appropriate for their tool. The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with hardware supplied by any tool manufacturer. The U.S.
Standard

Recommended Practice for Pass-Thru Vehicle Programming
2019-07-29
CURRENT
J2534_201907
This SAE Recommended Practice provides the framework to allow reprogramming software applications from all vehicle manufacturers the flexibility to work with multiple vehicle data link interface tools from multiple tool suppliers. This system enables each vehicle manufacturer to control the programming sequence for electronic control units (ECU’s) in their vehicles, but allows a single set of programming hardware and vehicle interface to be used to program modules for all vehicle manufacturers. This document does not limit the hardware possibilities for the connection between the PC used for the software application and the tool (e.g., RS-232, RS-485, USB, Ethernet…). Tool suppliers are free to choose the hardware interface appropriate for their tool. The goal of this document is to ensure that reprogramming software from any vehicle manufacturer is compatible with hardware supplied by any tool manufacturer. The U.S.
12Next >Last >>
X