Refine Your Search

Search Results

Viewing 1 to 11 of 11
Standard

Corrosion Test Master Establishment

2015-03-19
CURRENT
J2636_201503
This SAE lab recommended practice may be applied to corrosion test methods such as salt spray, filiform, Corrosion creep back, etc. This procedure is intended to permit corrosion testing to be assessed between Laboratories for correlation purposes.
Standard

Biaxial Wheel Fatigue Test

2016-04-27
CURRENT
J2562_201604
This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks and minimum cycle requirement for ferrous wheels for ballasted passenger car applications. The appendices provide scalable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.
Standard

Biaxial Wheel Fatigue Test

2005-11-07
HISTORICAL
J2562_200511
This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks. The appendices provide scaleable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.
Standard

WHEEL NUT SEAT STRENGTH

1998-02-01
HISTORICAL
J2315_199802
The purpose of this test is to evaluate the axial strength of the nut seat of wheels intended for use on passenger cars, light trucks, and multipurpose vehicles. In addition, a minimum contact area is recommended to ensure enough strength for the rotational force in tightening a nut against the nut seat. While this test ensures the minimum strength of the nut seat, the wheel must also have a degree of flexibility. This flexibility, as well as bolt tension, are important to maintain wheel retention.
Standard

Wheel Nut Seat Strength

2015-12-17
CURRENT
J2315_201512
The purpose of this test is to evaluate the axial strength of the nut seat of wheels intended for use on passenger cars, light trucks, and multipurpose vehicles. In addition, a minimum contact area is recommended to ensure enough strength for the rotational force in tightening a nut against the nut seat. While this test ensures the minimum strength of the nut seat, the wheel must also have a degree of flexibility. This flexibility, as well as bolt tension, are important to maintain wheel retention.
Standard

Aftermarket Wheels—Passenger Cars and Light Truck—Performance Requirements and Test Procedures

2009-11-09
HISTORICAL
J2530_200911
This SAE Recommended Practice provides performance, sampling, and certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.
Standard

Aftermarket Wheels - Passenger Cars and Light Truck - Performance Requirements and Test Procedures

2016-04-27
CURRENT
J2530_201604
This SAE Recommended Practice provides performance, sampling, and certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.
Standard

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

2015-03-19
CURRENT
J2635_201503
This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application.
Standard

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

2007-08-09
HISTORICAL
J2635_200708
This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application.
Standard

Mechanical and Material Requirements for One Piece Wheel Nuts

2012-10-18
CURRENT
J2283_201210
This SAE Standard covers the chemical, metallurgical, and mechanical requirements for one piece passenger car and truck ferrous wheel nuts with conical or spherical nut seats for the following sizes: This test is for typical wheel nuts. Special applications (nut material and/or configurations) may require special conditions which must meet load values in 3.4.
Standard

Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks

2012-07-20
CURRENT
J2316_201207
This SAE Recommended Practice provides minimum performance requirements and uniform procedures for nut seat system strength of wheels intended for normal highway use on passenger cars, light trucks, (except dual wheels, which are covered by SAE J1965) and multipurpose passenger vehicles. The nut seat system includes the wheel, wheel bolts, and wheel nuts as applicable. Many factors must be considered in design and validation of wheel attachments for each specific vehicle. The individual components should be evaluated per the SAE standards referenced.
X