Refine Your Search

Search Results

Viewing 1 to 10 of 10
Standard

Scribing of Coatings in Preparation for Testing of Wheels and Wheel Trim

2015-03-19
CURRENT
J2634_201503
This SAE practice is intended for the sample preparation of test pieces for automotive wheels and wheel trim. The practice provides a consistent scribing method for use on test panels and or component parts with substrate chemical pretreatment and coating systems. Test specimens can then be subjected to various corrosion tests in order to evaluate performance without significant variations of the degree of exposure of the substrate. The scribing is used to create a break in the coating/finishing as can occur in the field through gravel and other damaging conditions. NOTE— Significant variability is attributed to surface contour, coating hardness/softness, operator reproducibility, and the scribing tool and it’s condition.
Standard

Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations

2016-03-18
CURRENT
J1986_201603
This SAE Recommended Practice is intended to serve as a guide for standardization of features, dimensions, and configurations of balance weights for aluminum and steel wheels intended for use on passenger cars, light trucks, and multipurpose vehicles to assure good installation and retention of the balance weight. This document also provides test procedures and minimum performance requirements for testing balance weight retention.
Standard

Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations

2011-04-28
HISTORICAL
J1986_201104
This SAE Recommended Practice is intended to serve as a guide for standardization of features, dimensions, and configurations of balance weights for aluminum and steel wheels intended for use on passenger cars, light trucks, and multipurpose vehicles to assure good installation and retention of the balance weight. This document also provides test procedures and minimum performance requirements for testing balance weight retention.
Standard

Test Methodology for Evaluating the Chemical Compatibility of Wheel Finishes with Various Chemicals

2008-11-21
HISTORICAL
J2792_200811
This document proposes methods for the testing and evaluation of aluminum wheel and wheel trim surface finishes for compatibility with various types of tire, wheel and car wash cleaning materials, and other chemicals that might come into contact with these automotive components. It is recognized that each end user of this methodology might seek answers to questions that are unique to his business or situation. Therefore, the procedure is written in a generic sequence that could be strictly followed, repeated, or modified in order to provide the user with the best results. Example decision tree are provided to help the user select a sequence of exposure steps that would best suit his needs, (reference Figures 1, 2). This procedure should not be utilized if the intent is to evaluate the compatibility of wheel finishes to any flammable products, because those chemistries would require special laboratory safety and handling precautions.
Standard

Test Methodology for Evaluating the Chemical Compatibility of Wheel Finishes with Various Chemicals

2015-09-22
CURRENT
J2792_201509
This document proposes methods for the testing and evaluation of aluminum wheel and wheel trim surface finishes for compatibility with various types of tire, wheel and car wash cleaning materials, and other chemicals that might come into contact with these automotive components. It is recognized that each end user of this methodology might seek answers to questions that are unique to his business or situation. Therefore, the procedure is written in a generic sequence that could be strictly followed, repeated, or modified in order to provide the user with the best results. Example decision tree are provided to help the user select a sequence of exposure steps that would best suit his needs, (reference Figures 1, 2). This procedure should not be utilized if the intent is to evaluate the compatibility of wheel finishes to any flammable products, because those chemistries would require special laboratory safety and handling precautions.
Standard

Biaxial Wheel Fatigue Test

2016-04-27
CURRENT
J2562_201604
This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks and minimum cycle requirement for ferrous wheels for ballasted passenger car applications. The appendices provide scalable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.
Standard

Biaxial Wheel Fatigue Test

2005-11-07
HISTORICAL
J2562_200511
This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks. The appendices provide scaleable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.
Standard

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

2007-08-09
HISTORICAL
J2635_200708
This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application.
Standard

Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles)

2011-04-25
HISTORICAL
J1981_201104
The test is designed to evaluate the frontal impact resistance of wheel and tire assemblies used with passenger cars, light trucks and multi-purpose vehicles. The test is specifically related to vehicle pothole tests that are undertaken by most vehicle manufacturers. The scope has been expanded to allow the use of a striker that can be angled to preferentially impact the inboard and outboard wheel flange. For side impact of the outboard rim flange only, please refer to SAE J175. This SAE Recommended Practice provides a procedure to test a wheel or a tire and the test failure criteria. The specific test for a vehicle requires input from a pothole test on that vehicle to establish the drop height of the striker used in this test.
Standard

Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles)

2016-09-16
CURRENT
J1981_201609
The test is designed to evaluate the frontal impact resistance of wheel and tire assemblies used with passenger cars, light trucks and multi-purpose vehicles. The test is specifically related to vehicle pothole tests that are undertaken by most vehicle manufacturers. The scope has been expanded to allow the use of a striker that can be angled to preferentially impact the inboard and outboard wheel flange. For side impact of the outboard rim flange only, please refer to SAE J175. This SAE Recommended Practice provides a procedure to test a wheel or a tire and the test failure criteria. The specific test for a vehicle requires input from a pothole test on that vehicle to establish the drop height of the striker used in this test.
X