Search Results

Abstract Truck platooning comprises a number of trucks equipped with automated lateral and longitudinal vehicle control technology, which allows them to move in tight formation with short following distances. This study is an initial step toward developing an understanding of the occupant injury risks associated with the multiple sequential impacts between truck platoons and roadside safety barriers, regardless of whether the crash is associated with a malfunction of automated control or human operation. Full-scale crash impacts of a tractor-trailer platoon into a concrete bridge guardrail were simulated for a specific Test Level condition according to the Manual for Assessing Safety Hardware (MASH) standards. The model of the bridge barrier was developed based on its drawings, and material properties were assigned according to literature data.

Abstract Tire-pavement interaction noise (TPIN) dominates for passenger cars above 40 km/h and trucks above 70 km/h. Numerous studies have attempted to uncover and distinguish the basic mechanisms of TPIN. However, intense debate is still ongoing about the validity of these mechanisms. In this work, the physical mechanisms proposed in the literature were reviewed and divided into three categories: generation mechanisms, amplification mechanisms, and attenuation mechanisms. The purpose of this article is to gather the published general opinions for further open discussions.

Abstract The innovations of vehicle connectivity have been increasing dramatically to enhance the safety and user experience of driving, while the rising numbers of interfaces to the external world also bring security threats to vehicles. Many security countermeasures have been proposed and discussed to protect the systems and services against attacks. To provide an overview of the current states in this research field, we conducted a systematic mapping study (SMS) on the topic area “security countermeasures of in-vehicle communication systems.” A total of 279 papers are identified based on the defined study identification strategy and criteria. We discussed four research questions (RQs) related to the security countermeasures, validation methods, publication patterns, and research trends and gaps based on the extracted and classified data. Finally, we evaluated the validity threats and the whole mapping process.

Abstract Jet engine hot parts (e.g., jet nozzle) are a crucial source of aircraft’s infrared (IR) signature from the rearview, in 1.9-2.9 μm and 3-5 μm bands. The exhaust nozzle design used in a jet aircraft affects its performance and IR signature (which is also affected just by performance) from the engine layout. For supersonic aircraft (typically for M ∞ > 1.5), a converging-diverging (C-D) nozzle is preferred over a convergent nozzle for optimum performance. The diverging section of the C-D nozzle has a full range of visibility from the rearview; hence, it was not considered a prudent choice for low IR observability. This theoretical study compares the IR signature of the C-D nozzle with that of the convergent nozzle from the rearview in 1.9-2.9 μm and 3-5 μm bands for the same thrust.

Abstract The Friction stir welding (FSW) is recently presented so to join different materials without the melting process as a solid-state joining technique. A widely application for the FSW process is recently developed in automotive industries. To create the welded components by using the FSW, the plunged probe and shoulder as welding tools are used. The Finite Element Method (FEM) can be used so to simulate and analyze material flow during the FSW process. As a result, thermal and mechanical stresses on the workpiece and welding tool can be analyzed and decreased. Effects of the welding process parameters such as tool rotational speed, welding speed, tool tilt angle, depth of the welding tool, and tool shoulder diameter can be analyzed and optimized so to increase the efficiency of the production process. Material characteristics of welded parts such as hardness or grain size can be analyzed so to increase the quality of part production.

Abstract Automated guided vehicle systems (AGVS) are the prominent one in modern material handling systems used in small manufacturing enterprises (SMEs) due to their exciting features and benefits. This article pinpoints the need of AGVS in SMEs by describing the material handling selection in SMEs and enlightening recent technological developments and approaches of the AGVS. Additionally, it summarizes the analytical and simulation-based tools utilized in design problems of AGVS along with the influence of material handling management and key hurdles of AGVS. The current study provides a limelight towards making smart automated guided vehicles (AGVs) with the simplified and proper routing system and favorable materials and more importantly reducing the cost and increasing the flexibility.

Abstract Today’s explosive condition of the market is compelling the manufacturing organizations to switch from traditional manufacturing (TM) to lean manufacturing (LM) to create a footprint in this competitive era. In this article, 16 critical success factors (CSFs) for LM implementation are identified through a vast literature review, the opinion of academicians and industry experts and interpretive structural modeling (ISM) is used to create interrelationships among the identified CSFs, and interpretive ranking process (IRP) rank these CSFs based on dominance with respect to performance dimensions. Leadership and management made the foundation of an ISM model while the training and people development have secured the first rank in the IRP model. Implementation of such ISM- and IRP-based models of CSF would give a clear understanding of these CSFs so that LM researchers, decision-makers, managers, and practitioners of LM will use their resources more efficiently.

Abstract A key element in an ergonomically designed driver’s seat in a car is the correct identification of driver seating position and posture accommodation. Current practice by the automotive Original Equipment Manufacturer (OEM) is to utilize the Society of Automotive Engineering (SAE) J1517 standard practice as a reference. However, it was found that utilizing such guidelines, which were developed based on the American population, did not fit well with the anthropometry and stature of the Malaysian population. This research seeks to address this issue by comparing the SAE J1517 Model against Malaysian preferred driving position. A total of 62 respondents were involved for the driver seating position and accommodation study in the vehicle driver’s seat buck mockup survey and measurements. The results have shown that the Malaysian drivers prefer to sit forward as compared to the SAE J1517 Model and have shorter posture joint angle.

Abstract TOC

Abstract Automotive cybersecurity engineers now have the challenge of delivering Risk Assessments of their products using a method that is described in the new standard for automotive cybersecurity: International Organization for Standardization/Society of Automotive Engineers (ISO/SAE) 21434. The ISO standards are not treated in the same way as regulations that are mandated by governing bodies. However, the new United Nations (UN) Regulation No. 155 “Cyber Security and Cyber Security Management” actually drives a need to apply ISO/SAE 21434. This article investigates the practical aspects of performing such a Threat Analysis and Risk Assessment (TARA) from system modelling and asset identification to attack modelling and the consequences an attack will have.

Abstract ICVs are expected to make the transportation safer, cleaner, and more comfortable in the near future. However, the trend of connectivity has greatly increased the attack surfaces of vehicles, which makes in-vehicle networks more vulnerable to cyberattacks which then causes serious security and safety issues. In this article, we therefore systematically analyzed cyberattacks and corresponding countermeasures for in-vehicle networks of intelligent and connected vehicles (ICVs). Firstly, we analyzed the security risk of ICVs and proposed an in-vehicle network model from a hierarchical point of view. Then, we discussed possible cyberattacks at each layer of proposed network model.

Abstract Connected and automated vehicles (CAVs) can bring safety, mobility, and energy benefits to transportation systems. Ideally, CAV applications would be fully evaluated and validated prior to real-world implementation. However, many technical challenges in both software and hardware hinder the process. To comprehensively evaluate all aspects of CAV applications, an integrated evaluation environment is needed with various simulation tools from different domains. In the current literature, there lacks a well-developed interface to enable multi-resolution simulation of vehicle, traffic, virtual environment, and hardware-in-the-loop (HIL) simulation. In this work, a modular and flexible interface is developed to enable multi-resolution vehicle and traffic co-simulation for CAV applications.

Abstract Testing of advanced driver assistance system (ADAS) functions and automated driving (AD) technologies is an important step in their development, which cannot be addressed by the traditional automotive validation and verification processes. It has to be guaranteed before their deployment that the ADAS/AD functions exhibit appropriate and intended vehicle behavior under all possible scenarios. Particularly, analyzing the impact of ADAS/AD systems on traffic safety and efficiency is not trivial and is an active research topic. In the current article, a submicroscopic co-simulation framework is introduced consisting of microscopic traffic simulation, infrastructure communications, realistic vehicle dynamics, and corresponding ADAS functions.

Abstract With the growing number of cross-sea flights, the occurrence of maritime-related accidents, which have a high fatality rate, has become increasingly critical. This study is aimed at highlighting the causes of maritime-related accidents and identifying the risk factors that led to fatal crashes in the period 2009-2019. A total of 207 maritime-related accidents, the final reports of which are available in the online database of the National Transportation Safety Board, were considered. The accident cause distribution was obtained from the final reports. A two-step approach, involving uni-variable and multi-variable analysis logistic regression, was implemented to select the significant risk factors from 27 parameters. Results showed that the four main causes of maritime-related accidents were personnel issues (69.6%), aircraft-related aspects (60.4%), environmental issues (36.7%), and organizational issues (3.9%).

Abstract Letter from the Guest Editors

Abstract Numerous operational procedures regulate aerodrome ground traffic. Detailed solutions in these procedures often come from preventive recommendations formulated as a result of accident cause analysis. With time, the conclusions drawn based on incidents, i.e., events that did not result in material damage or casualties, are becoming increasingly significant. In this article, we propose a new method for determining the probability of an incident turning into an air accident, based on the example of aerodrome traffic operations. Premises conducive to an accident in the considered class of events depend on both human and physical factors. Thus a hybrid approach was applied. We used a fuzzy inference system to analyze the premises dependent on vehicle operators, while the simulation method was selected to examine the premises dependent on physical factors. Both were integrated using the technique of event trees with fuzzy probabilities (ETFP).

Abstract Letter from the Guest Editors

Abstract This work puts presents an all-inclusive state of the art bibliographical review of all categories of electrified transportation (xEVs) standards, issued by the most important standardization organizations. Firstly, the current status for the standards by major organizations is presented followed by the graphical representation of the number of standards issued. The review then takes into consideration the interpretation of the xEVs standards developed by all the major standardization organizations across the globe. The standards are differentiated categorically to deliver a coherent view of the current status followed by the explanation of the core of these standards. The ISO, IEC, SAE, IEEE, UL, ESO, NTCAS, JARI, JIS and ARAI electrified transportation vehicles xEV Standards from USA, Europe, Japan, China and India were evaluated. A total approximated of 283 standards in the area have been issued.

Abstract Aluminum boron carbide (Al-B4C) composites have been a popular choice among scientists and designers for high-performance strength-to-weight ratio engineering applications. Requirements for such applications are met due to enhanced microstructure, mechanical properties, and ease of processing conditions. The performance and application of these composites are mostly dependent on certain parameters, like composition ratios of reinforcing particles, their sizes and wettability, the presence of additional phases, etc. Prominently, efforts are also being made to synthesize Al-B4C as functionally graded materials (FGMs) that have the potential to cater to the needs of advanced engineering applications and can facilitate new dimensions in the field of aluminum matrix composites (AMCs).

Abstract The preeminent obligation of the automotive engineers, while designing a car, is to assure the driver’s well-being during any kind of impact by suppressing intrusions into the cockpit or minacious deceleration levels. Technologists and designers are advancing various modern active and passive safety systems to augment vehicle occupants’ safety. To mitigate the research and development expenditure in time and money, it is recommended to utilize computational crash simulations for the early evaluation of safety behavior under vehicle impact tests. Therefore, in this research study, an attempt is made to simulate crashworthiness and design the impact attenuator utilized in Formula SAE vehicles to absorb the kinetic energy of a car during a frontal collision. Closed-cell aluminum foam is selected as its material because of its less density than solid metals and ability to undergo large deformations at almost constant load.