Search Results

Making sense on sensors AutoDrive Challenge team from North Carolina A&T State University gets the most out of its few sensors. Victory at last The first Formula SAE win of Polytechnique Montreal: why keeping it simple and being prepared was the key. Keeping it light Gram by gram, students at Ningxia University carve weight off their SAE Aero Design East plane to win the 2019 competition.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Editorial The consolidation plot thickens The Navigator As the world turns to C-V2X, Europe picks WiFi Complexity of Autonomous-Systems Simulation, Validation Soars to the Clouds Scalable, cloud-based architectures are gaining greater acceptance for simulating and testing the myriad development aspects of automated driving. Connectivity Solutions for AVs The promises of fully connected autonomous vehicles are great, but so are the challenges. What M&E Can Teach the AV Industry About Data Media & entertainment offers important learnings on data retention, management, scalability and security. The Rodney Dangerfield of Automated-Driving Sensors Radar and lidar get all the attention, but Inertial Measurement Units are the backbone of sensor fusion. Suppliers are scrambling to make IMUs more accurate-and much less expensive. The Sense-itive Side of Autonomous Vehicles BASF is exploring how specific materials-and even paint colors and finishes-can improve the capabilities of AV sensors.

Material selection for battery enclosures Mass reduction is the main reason BEV makers choose aluminum for battery enclosures, but cost and thermal requirements favor steel and polymer composites. Startup targets medium-duty EVs Atlis Motors purpose-engineers nearly all the vital components for an electric pickup and platform capable of spanning several market segments. High-voltage hybrids FEV engineers evaluate 48V and high-voltage parallel hybrid architectures for Class 6-7 commercial vehicles. Certain setups show more promise than others. Hemphill's mission: Support the innovation ecosystem Schaeffler America CTO Jeff Hemphill brings impressive technical chops and well-honed communication skills to his new role as 2021 SAE International president.

Simulating cab noise and vibration Researchers at kubota and Doshisha University have established a prediction method for the engine-idling state using statistical energy analysis. Manufacturing cost estimating Caterpillar's ACT Group uses Micro Estimating Systems' computer-aided estimating program to increase efficiency and decrease operating costs in powder-metal part manufacturing. In search of greener pastures Agricultural OEMs are looking at the total life cycle to develop more environmentally conscious products and processes. Emissions and lubrication More stringent diesel emissions legislation is placing an increased burden on engine lubricant in the form of soot loading.

Huge loader: huge tire Tire technology retains a direct controlling influence over wheeled machine mass and application requirements. Getting engineers off the streets Hands-on experience and career-long training are widely employed to equip engineers with a skill set more varied than just technical know-how. Driving blind Industry, government, and academia have their eyes on autonomous off-highway vehicles. Introducing Duane Tiede, SAE President for 2004 With over 35 years of diverse experience in the off-highway industry, Duane Tiede steps up to a new challenge-leading SAE into its 100th year.

Designing out emissions Researchers from Michigan Technological University designed and tested a single-cylinder, four-stroke engine with electronic fuel injection and catalytic exhaust treatment for a snowmobile application. Networking to extend equipment life Equipment developers are using local area networks to gather specific usage and maintenance data in response to the needs of off-highway equipment owners and leasing companies to maximize investments. CAE goes off-highway A look at how manufacturers are saving time and improving quality by using computer simulation. Engineering the first 50-ton ADT While it could be said that the articulated frame truck is now a mature concept, Bell Equipment moved the goal posts by redefining both the weight class and application range for this versatile machine.

Switching to new controls Hall-effect switches, LEDs transform cab interiors. Save the weight For efficiency improvements, the desire to reduce the mass of vehicle subsystems is far greater than the ability. As a result, off-highway suppliers must seek innovation and technological advances through other means.

Bridging the power gap An alliance between Cummins and Komatsu provides an intriguing prospect to the industrial engine market with the new QSK78 industrial engine. Large eddy simulation in hydraulic valves Cavitation in hydraulic spool valaves involves large-scale vortical structures in an unsteady submerged jet. According to engineers from Purdue University, curent CFD approaches do not accurately predict these unsteady vortices, nor do they properly account for bubble-dynamics/flow-structure interactions. Proving heavy-vehicle performance The Nevada Automotive Test Center and Mechanical Dynamics joined forces to redesign and improve the drivetrain, frame, steering, and other subsystems of a heavy-duty military-vehicle for the USMC. Tying it all together GPS. Engine diagnostics. Wireless communications. So much technology. So many voices. Is it a chorus of the Tower of Babel?

More with less through electronic components Off-highway engineers have had to walk a precarious path in recent years by developing engine technologies that offer customers better vehicle performance and regulators lower emissions. The promises and problems of electrohydraulics Engineers acknowledge that electrohydraulics are the way of the future for the off-highway industry, and that the field itself could use a good public-relations campaign to attract more engineering students. Deere goes all out for agriculture To some, it may seem odd that John Deere picked this particular economy to launch over 50 new products, the most in its 164-year history. To others it reeks of confidence. Switching control in hydraulic drives Researchers from Johannes Kepler University believe agricultural machinery can be improved by further advances in motion generation.

Improving lightweight vehicle dynamics Bosch engineers used numerical simulation to evaluate vehicle concepts using variable semi-active components, tire specifications, and suspension spring rates. Dr. Reitzle's prescription for Jaguar His vision for the brand is to "use top-level technology and do so in a very emotional way." Dual-voltage power networks Lear Automotive EEDS has developed an innovative electrical and electronic architecture to handle future high-power requirements in vehicles. New door closure concepts Bosch and Temic engineers are developing technologies for passive entry, vehicle immobilization, and remote control. TwinCAN: one module for two nodes The ability to use one module to control two CAN nodes provides benefits including reduced hardware and software requirements, improved functionality, and lower CPU load, according to Infineon researchers.

Ultracapacitors charge ahead The limitations of current energy-storage solutions could encourage consideration of these alternative solutions, but more engineering work needs to be done to reduce costs. Technology for all Automotive industry executives expect high-end technologies, once considered only for inclusion in luxury cars, to increasingly make their way into entry- and mid-level vehicles in the very near future. Convergence continues A lot of automotive electronics ground has been covered at the Convergence conferences past, and there's more to come at this year's show in October. Fueling the next generation As hydrogen joins the battle for automotive power with gasoline and diesel, the future could be more choices rather than one winner.

Trends in advanced chassis control Motorola vehicle system developers examine the state-of-the-art microprocessor and other electronic technologies driving the development of advanced braking, steering, suspension control, and collision warning/avoidance systems. Wheel design and engineering Consumer demand is driving the automakers' move to large-diameter, shiny, alloy wheels. Telematics and the digital car As development of new telematics products and services gain speed, OEMS, suppliers, and other players in the automotive industry are using simulators as a tool to gain greater understanding of driver distraction. NisSun Rising Nissan is back, according to President and COO Carlo Hosn, thanks to a revised product development structure that makes better use of employees and technology. Back to the future for Ford manufacturing The Vice President of Vehicle Operations said the company's goal is raw materials to finished goods in one day.

Finding the right niche As technology, politics, and OEMs struggle to achieve environmental cohesion, small and niche companies are determined to ride out the maelstrom with their ability to adapt, react, succeed, and survive. Jaguar and Land Rover shift Access to technology and engineering takes center stage as the two brands transition from one giant parent to another as Tata takes over from Ford. Aston Martin bonds The company is developing closer ties with Tier 1 suppliers in its new role as an independent. Bentley has secret CO2 plans The company wants to combine luxury and high-performance hallmarks with massive cuts in emissions. Lotus small and manueverable The engineering arm's technology menu--including lightweight, small engines, and high performance--is being sampled across the world. Porsche looks to the future Gasoline hybrid technology, convergence potential, and diesels could be in store for the company.

CO2 changing focus The global economic crisis could trigger novel engineering solutions and the need for comprehensive testing. ZEVs, fuel cells, and high-tech engines Only 10% of cars on Europe's roads by 2020 may be zero-emissions vehicles, but Mercedes-Benz is supporting future ZEV and other advanced technologies with an undiminished R&D budget. Warning signs Design and engineering lead-time tightening may be strangling innovative thinking, says Royal College of Art's Harrow. The decade ahead Renault anticipates that a majority of its powertrains will be downsized to the 0.9- to 1.2-L range and that electric cars will appeal to 30% of the buying public. Automatic for the people Automatic-shifting dual-clutch transmissions are poised to grab share from traditional transmissions thanks to their combination of efficiency and convenience.

Cars become more understanding Software and hardware advances are enabling voice-recognition technologies to rise to industry challenges. Wanted: Broader knowledge, new skills Continuous learning is a must for engineers to meet greater technology and productivity challenges -- and boost their own marketability. Seeing green Environmental and cost benefits are driving the auto industry to adopt materials derived from renewable sources such as soybeans and corn. Searching for fossil-fuel alternatives Future engine and drivetrain programs at Volkswagen are focused on alternative fuels and radical changes to engine combustion, but the battery may yet provide the light at the end of the technology tunnel. Emissions rules keep labs humming As long as there are regulations, engineers and technicians will be busy running tests in laboratories.

Top technologies for 2004 "Aerospace Engineering's" annual review of the technologies chosen by its readers to be the most significant. Tooling around in the computer Much of the latest software is very capable, but learning how to get the best out of it, and getting the business processes right, is the key to success.

Pickup shocker With the R1T, Rivian emerges as the startup most likely to build the electric vehicle all of America will want to own. Plastics spur tech innovations The SPE Innovation Awards recognize vehicle OEMs and their supply chains for novel material developments and applications. A lesson in Multiphysics OEM engineers reveal how new software from Comsol improved their modeling and analysis of EV battery performance and audio-system sound quality. Heat pumps-expensive but worth it? They add 50% to the cost of the Jaguar I-Pace climate-control system, but improved designs are indicating the cost can be recovered-whether for a Jag or an electric school bus.

Optimizing hybrids for cost and fficiency AVL engineers detail a modular engine program suitable for all forms of hybridization. ICE: Once more, with feeling BorgWarner CSO sees at least one more generation of the ICE before its 'sunset.' Actuating hybrid and EV efficiency More sophisticated driveline-disconnect systems are part of the electrified-vehicle future, says the head of controls at Stoneridge. The world's piston maker charts the ICE future According to Mahle's research VP, the remaining development path for internal combustion is clean, electrified and ready for alternative fuels. Pumping EV heat Heat-pump technology is a game-changer for the widespread adoption of electric vehicles, says a service-tech training expert and EV owner.

Going direct in manufacturing Prototyping transitions from one-off components to flight-ready hardware. Traveling light, traveling easy Airplane manufacturers have always tried to avoid unnecessary weight- and today's materials and design tactics combine for stronger structures with less weight. making flying safer Technology is applied to new avionics and ground-based systems to make air operations, military as well as civil, far safer than ever before. Innovative Thinking 101 West Virginia University professor Dr. James E. Smith issues a call for innovation as one of the central themes of his term as SAE's 2009 President.