Refine Your Search

Topic

Author

Affiliation

Search Results

Training / Education

Introduction to Commercial and Off-Road Vehicle Cooling Airflow Systems

Vehicle functional requirements, emission regulations, and thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Given the expected increase in emission-related heat rejection, suppliers and vehicle manufacturers must work together as partners in the design, selection, and packaging of cooling system components. An understanding and appreciation of airflow integration issues and vehicle-level trade-offs that effect system performance are important to the team effort. The severe duty cycles, minimal ram air, and sometimes unconventional package layouts present unique challenges.
Standard

Minimum Performance & Compatibility Criteria for MVAC Flushing Fluids used in R-134a & R-1234yf Systems.

2015-02-16
WIP
J3091
This SAE standard applies to any and all Flushing Fluids intended for aftermarket use to clean and decontaminate sections of the refrigerant circuit within a vehicle A/C system. This standard provided testing and acceptance criteria for determining minimum performance and compatibility of Flushing Fluids with A/C system materials and components, which may be intended for use in servicing vehicle A/C systems. This standard will only indicate a Flushing Fluid's minimum performance criteria, and that it is chemically compatible with materials used in the A/C system. It is not the intent of this document to identify requirements for ultraviolet leaks detection dyes, as such dyes must meet the requirements of SAE J 2297. It is not the intention of this document to identify requirements for system additives, as such additives must meet the requirements of SAE J 2670.
Standard

Aftermarket Service Lubricants for use in MVAC Systems

2017-04-07
WIP
J3140
This SAE standard applies to compressor lubricants intended for aftermarket use in the refrigerant circuit of vehicle air-conditioning systems. This standard does not grant the user to qualify a lubricant as OEM approved. This SAE Standard is not limited by refrigerant selection, however, only refrigerants identified in SAE 639 may apply for SAE J2911 submission and container labeling.
Collection

Climate Control, 2018

2018-04-03
Climate control is a defining vehicle attribute and is associated with brand image. Thermal performance is critical to customer satisfaction. The primary objective is to deliver occupant safety and thermal comfort at minimum energy consumption, yet the system has strong design interaction with other vehicle systems. Noise, Air Quality, and Energy ace are just a few of the recent advances.
Collection

Climate Control, 2017

2017-03-28
Climate control is a defining vehicle attribute and is associated with brand image. Thermal performance is critical to customer satisfaction. The primary objective is to deliver occupant safety and thermal comfort at minimum energy consumption, yet the system has strong design interaction with other vehicle systems. Noise, Air Quality, and Energy ace are just a few of the recent advances.
Video

Neural Network-based Optimal Control for Advanced Vehicular Thermal Management Systems

2011-12-05
Advanced vehicular thermal management system can improve engine performance, minimize fuel consumption, and reduce emissions by harmoniously operating computer-controlled servomotor components. In this paper, a neural network-based optimal control strategy is proposed to regulate the engine temperature through the advanced cooling system. Presenter Asma Al Tamimi, Hashemite University
Video

Cooling Airflow System Modeling in CFD Using Assumption of Stationary Flow

2011-11-29
Today CFD is an important tool for engineers in the automotive industry who model and simulate fluid flow. For the complex field of Underhood Thermal Management, CFD has become a very important tool to engineer the cooling airflow process in the engine bay of vehicles. Presenter Peter Gullberg, Chalmers University of Technology
Video

Impact of Auxiliary Loads on Fuel Economy and Emissions in Transit Bus Applications

2012-05-25
In this paper we present the results of full-scale chassis dynamometer testing of two hybrid transit bus configurations, parallel and series and, in addition, quantify the impact of air conditioning. We also study the impact of using an electrically controlled cooling fan. The main trend that is noted, and perhaps expected, is that a significant fuel penalty is encountered during operation with air conditioning, ranging from 17-27% for the four buses considered. The testing shows that the series hybrid architecture is more efficient than the parallel hybrid in improving fuel economy during urban, low speed stop and go transit bus applications. In addition, smart cooling systems, such as the electrically controlled cooling fan can show a fuel economy benefit especially during high AC (or other increased engine load) conditions.
Video

High Speed Machining of CFRP Parts

2012-03-16
High Speed Machining of CFRP Parts Investigation of the influence of new geometries, cutting datas and coolant capabilities on the surface finish of CFRP parts. State of the art: Different CFRP grades and machining conditions make geometry adjustments to the tool necessary. Mechanical failures through machining operations can be avoided in most of the cases. New unidirectional CFRP grades and dry machining processes again lead to machining problems. This study investigates new geometries to avoid heat damage with dry maching and air coolant in case of unidirectional CFRP. With help of a thermo camera and the surface investigation with a scanning electron microscope, heat damage can be analysed and therefore new geometries can be developed and tested. Target is to develop a new multi purpose CFRP geometry to meet the requirements of the future. The reduction of different geometries used leads to major cost savings. Presenter Ingo von Puttkamer, Guhring oHG
Training / Education

Introduction to Cooling Airflow Systems Web Seminar RePlay

Anytime
Vehicle functional requirements, diesel emission regulations, and subsystem thermal limits all have a direct impact on the design of a powertrain cooling airflow system. Severe duty cycles, minimal ram air, fouling, and sometimes unconventional package layouts present unique challenges to the designer. This course introduces many airflow integration issues and vehicle-level trade-offs that effect system performance and drive the design. The goal of this course is to introduce engineers and managers to the basic principles of diesel cooling airflow systems for commercial and off-road vehicles.
Technical Paper

Installation Effects on the Flow Generated Noise From Automotive Electrical Cooling Fans

2020-09-30
2020-01-1516
With the electrification of road vehicles comes new demands on the cooling system. Not the least when it comes to noise. Less masking from the driveline and new features, as for example, cooling when charging the batteries drives the need for silent cooling fans. In this work a novel e-fan is studied in different generalized installations and operating conditions. The fans (a cluster configuration) are installed in a test rig where the operation could be controlled varying the speed, flow rate and pressure difference over the fan. On the vehicle side of the fan a generalized packaging space (similar to an engine bay for conventional vehicles) is placed. In this packaging space different obstruction can be placed to simulate the components and radiators used in the vehicle. Here generalized simple blocks in different configuration are used to provide well defined and distinct test cases.
Technical Paper

Numerical Investigation of Narrow-Band Noise Generation by Automotive Cooling Fans

2020-09-30
2020-01-1513
Axial cooling fans are commonly used in electric vehicles to cool batteries with high heating load. One drawback of the cooling fans is the high aeroacoustic noise level resulting from the fan blades and the obstacles facing the airflow. To create a comfortable cabin environment in the vehicle, and to reduce exterior noise emission, a low-noise installation design of the axial fan is required. The purpose of the project is to develop an efficient computational aeroacoustics (CAA) simulation process to assist the cooling-fan installation design. This paper reports the current progress of the development, where the narrow-band components of the fan noise is focused on. Two methods are used to compute the noise source. In the first method the source is computed from the flow field obtained using the unsteady Reynolds-averaged Navier-Stokes equations (unsteady RANS, or URANS) model.
Technical Paper

Effects of On-Road Conditions on HVAC Noise

2020-09-30
2020-01-1555
Noise inside the passenger cabin is made up of multiple sources. A significant reduction of the major sound sources such as the engine, wind and tire noise helped to improve the comfort for passengers. As a consequence, the HVAC sound (heating, ventilation and air-conditioning) is unmasked as a primary noise source inside the passenger cabin and has to be taken into consideration when designing passenger cabin sound. While HVAC sound is often evaluated at stop, the most common situation of its use is while driving. In case of fresh air as mode of operation, the HVAC system is coupled to the environment through the air intake. Any change in the boundary conditions due to on-road driving events and gusts of wind affects the flow field in the HVAC system and in turn influences HVAC noise. This study investigates the effect of mass flow and pressure fluctuations on the HVAC noise. In a first step, major influences on the HVAC system are identified in an on-road test.
Technical Paper

Reinforcement of Low-Frequency Sound by Using a Panel Speaker Attached to the Roof Panel of a Passenger Car

2020-09-30
2020-01-1570
The woofer in a car should be large to cover the low frequencies, so it is heavy and needs an ample space to be installed in a passenger car. The geometry of the woofer should conform to the limited available space and layout in general. In many cases, the passengers feel that the low-frequency contents are not satisfactory although the speaker specification covers the low frequencies. In this work, a thin panel is installed between the roof liner and the roof panel, and it is used as the woofer. The vibration field is controlled by many small actuators to create the speaker and baffle zones to avoid the sound distortion due to the modal interaction. The generation of speaker and baffle zones follows the inverse vibro-acoustic rendering technique. In the actual implementation, a thin acrylic plate of 0.53ⅹ0.2 m2 is used as the radiator panel, and the control actuator array is composed of 16 moving-coil actuators.
Book

Principles of Engine Cooling Systems, Components and Maintenance

1990-10-01
Completely revised as a result of the significant progress made in cooling system design and maintenance practices and procedures, HS-40 provides current, comprehensive information on the description, function, and maintenance of engine liquid-cooling systems used in light and heavy-duty vehicles. Information-packed chapters discuss the interrelation between the cooling system and other engine systems, cooling system components, general preventive maintenance, and troubleshooting.
Technical Paper

Front-Wheel Drives

1930-01-01
300001
ENGINEERING considerations leading to the former almost universal practice of steering with the front wheels and driving and braking with the rear wheels are reviewed, and the desire for bodies lower than can be made with conventional design is given as the main reason for the present interest in front drives. For early history, European development, racing practice and the closely related subject of four-wheel drives, the reader is referred to a previous paper by Herbert Chase.2 One major advantage to be secured with front-drive design is lower unsprung weight, which should promote easy riding and road-holding ability and reduce tire wear. An inherent disadvantage is that driving-torque reaction and hill climbing shift some weight from the front axle to the rear axle, thus slightly reducing the tractive effort possible; but this shift is not considered important, since the control of weight distribution is in the hands of the designer.
Technical Paper

Engine Cooling

1932-01-01
320063
FROM 25 to 35 per cent of the heat energy of the fuel inducted into the cylinders of an internal-combustion engine must be eliminated by the cooling system. As this waste requires the expenditure of energy, the devising of an efficient cooling system is imperative. The author, who is a leading American authority on engine problems, discusses the theory of liquid-cooling, gives heat-transfer and temperature-balance equations that must be satisfied and points out the three interrelated variable factors that must be incorporated in their most economical relation. The cooling system must be studied as a whole, rather than from the standpoint of any particular unit. Some commonly held beliefs regarding fans, fuel-pumps and oil-temperature control are controverted. Five elements necessary for an efficient cooling system are enumerated.
X