Refine Your Search

Topic

Author

Affiliation

Search Results

Training / Education

Advanced Diesel Particulate Filtration Systems

As diesel emissions regulations have become more and more stringent, diesel particulate filters (DPF) have become possibly the most important and complex diesel aftertreatment device. This seminar covers many DPF-related topics using fundamentals from various branches of applied sciences such as porous media, filtration and materials sciences and will provide the student with both a theoretical as well as an applications-oriented approach to enhance the design and reliability of aftertreatment platforms.
Standard

Heavy Duty OBD IUMPR Data Collection Tool Process

2018-09-04
CURRENT
J3162_201809
This document describes the collection of IUMPR data required by the Heavy Duty On-Board Diagnostic regulation 13 CCR 1971.1 (l)(2.3.3), using SAE J1939-defined messages incorporated in a suite of software functions.
Book

Electronic Transmission Controls

2000-06-10
The evolution of the automotive transmission has changed rapidly in the last decade, partly due to the advantages of highly sophisticated electronic controls. This evolution has resulted in modern automatic transmissions that offer more control, stability, and convenience to the driver. Electronic Transmission Controls contains 68 technical papers from SAE and other international organizations written since 1995 on this rapidly growing area of automotive electronics. This book breaks down the topic into two sections. The section on Stepped Transmissions covers recent developments in regular and 4-wheel drive transmissions from major auto manufacturers including DaimlerChrysler, General Motors, Toyota, Honda, and Ford. Technology covered in this section includes: smooth shift control; automatic transmission efficiency; mechatronic systems; fuel saving technologies; shift control using information from vehicle navigation systems; and fuzzy logic control.
Book

Concepts in Turbocharging for Improved Efficiency and Emissions Reduction

2014-09-22
Legislative requirements to reduce CO2 emissions by 2020 have resulted in significant efforts by car manufacturers to explore various methods of pollution abatement. One of the most effective ways found so far is by shortening the cylinder stroke and downsizing the engine. This new engine then needs to be boosted, or turbocharged, to create the full and original load torque. Turbocharging has been and will continue to be a key component to the new technologies that will make a positive difference in the next-generation engines of years to come. Concepts in Turbocharging for Improved Efficiency and Emissions Reduction explores the many ways that turbocharging will deliver concrete results in meeting the new realities of sustainable, green transportation.
Standard

Physical and Chemical Properties of Engine Oils

2006-11-06
HISTORICAL
J357_200611
This SAE Information Report reviews the various physical and chemical properties of engine oils and provides references to test methods and standards used to measure these properties. It also includes general references on the subject of engine oils, base stocks, and additives.
Standard

Physical and Chemical Properties of Engine Oils

2016-01-19
CURRENT
J357_201601
This SAE Information Report reviews the various physical and chemical properties of engine oils and provides references to test methods and standards used to measure these properties. It also includes general references on the subject of engine oils, base stocks, and additives.
Standard

Hydraulic Motor Test Procedures

2009-06-12
CURRENT
J746_200906
This test code describes tests for determining characteristics of hydraulic positive displacement motors as used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the one shown in Figure 1. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F).
Standard

International Tests and Specifications for Automotive Engine Oils

2011-01-18
CURRENT
J2227_201101
This SAE Information Report lists engine and laboratory tests for service fill engine oils which are associated with specifications and classifications established outside of North America. These specifications and classifications include those developed prior to January 1, 2010 by international technical societies as well as individual original equipment manufacturers. The information contained within this report applies to engine oils utilized in gasoline and diesel powered automotive vehicles.
Book

Emissions and Air Quality

1999-06-09
This book evaluates the current worldwide state of knowledge about the interrelationship between emissions and air quality. This study describes the contribution of passenger car and commercial vehicle traffic to local and global emission situations, and the consequences for the environment.
Standard

Multiposition Small Engine Exhaust System Fire Ignition Suppression

2012-10-23
CURRENT
J335_201210
This SAE Recommended Practice establishes equipment and test procedures for determining the performance of spark arrester exhaust systems of multiposition small engines (<19 kW) used in portable applications, including hand-held, hand-guided, and backpack mounted devices. It is not applicable to spark arresters used in vehicles or stationary equipment.
Standard

Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines

2007-11-15
HISTORICAL
J2542_200711
This SAE Standard applies to the fuel consumption of non-propulsion engines used to drive exclusively the sweeping and cleaning functions of multi-engine sweepers and scrubbers as defined in SAE J2130. The purpose of this document is to derive a uniform expression of fuel consumption from a simulated test cycle. The derived expression is based on various work situations encountered during a typical daily eight-hour period of operation. The derived fuel consumption may be used to assess the sizing of fuel tanks.
Standard

Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines

2001-05-14
HISTORICAL
J2542_200105
This SAE Standard applies to the fuel consumption of non-propulsion engines used to drive exclusively the sweeping and cleaning functions of multi-engine sweepers and scrubbers as defined in SAE J2130. The purpose of this document is to derive a uniform expression of fuel consumption from a simulated test cycle. The derived expression is based on various work situations encountered during a typical daily eight-hour period of operation. The derived fuel consumption may be used to assess the sizing of fuel tanks.
Standard

Ship Systems and Equipment - Hydraulic Systems - Filter Selection Parameters

2013-07-02
WIP
J2333
This SAE Recommended Practice identifies and examines the various parameters which must be considered in selecting hydraulic systems filters, their locations within the system and the dirt capacity of the filter elements. This document is generally applicable to all ship hydraulic systems but does not apply to personal or recreational watercraft.
Collection

Advances in Oxidation and Particulate Filter Systems, 2014

2014-04-01
This technical paper collection covers the complete particulate filter system. There are papers covering the DOC aging as well as the effect of high sulfur fuel on the DOC. A couple of papers study the effect of ash accumulation and two papers cover a novel new asymmetric cell design and modeling of this new design. Finally we have a paper on gasoline particulate filters.
Collection

Particle Emissions from Combustion Sources, 2014

2014-04-01
This technical paper collection includes papers on PM measurement methods, soot generation, alternative methods of PM mass determination, in-cylinder contol of emissions, the effects of EGR, biodiesel fuels, duel fuel systems, soot emissions modeling, PM emissions from gasoline engines, including GDI, ethanol effects, and modeling.
Standard

Diesel Fuels

2004-07-28
HISTORICAL
J313_200407
Automotive and railroad diesel fuels, in general, are derived from petroleum refinery products which are commonly referred to as middle distillates. Middle distillates represent products which have a higher boiling range than gasoline and are obtained from fractional distillation of the crude oil or from streams from other refining processes. Finished diesel fuels represent blends of middle distillates. The properties of commercial distillate diesel fuels depend on the refinery practices employed and the nature of the crude oils from which they are derived. Thus, they may differ both with and within the region in which they are manufactured. Such fuels generally boil over a range between 163 and 371 °C (325 to 700 °F). Their makeup can represent various combinations of volatility, ignition quality, viscosity, sulfur level, gravity, and other characteristics. Additives may be used to impart special properties to the finished diesel fuel.
X