Search Results

Training / Education

The Nature of Automated Vehicle Safety Will SAE Level 5 Ever Be Achieved?

The automated vehicle industry has been busy designing, developing, and deploying several self driving vehicles and services in the last few years. However, much of the outcomes and the overall outlook of the vehicle and services, such as robotaxis, are not great. Customers and stakeholders complain that the level of automation is low, mostly SAE Levels 1, 2, and very little of Level 3. It appears that Level 4 is far out in the horizon and many wonder if Level 5 is actually achievable.

Training / Education

A Primer on Regulations and Liability Considerations for HAV’s

Potential regulations surrounding the development, testing and commercial launch of Highly Automated Vehicles and possible liability exposure for the manufacturing and operation of Highly Automated Vehicles are fluid and changing areas, that will continue to evolve over the next several years. The first half of this course reviews where regulations are at the state and federal levels, what actions are currently under consideration, how current regulations will need to change to accommodate HAV’s, and how and when new regulations might be implemented. The second half covers both common law and strict liability and how it may apply to HAV’s.

Training / Education

Navigating Requirements for International Certification of Aviation Products

This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.

Training / Education

Big Data Analytics for Connected, Autonomous Vehicles and Smart Cities

There is a growing interest in the concept of a smart city and how these advanced technologies will improve the quality of living and make a city more attractive to visitors, commerce and industry. This course fills an unmet need for defining and explaining the relationship between connected and autonomous vehicles (CAVs) and smart city transportation. It is apparent that CAVs will achieve the best results when integrated with current and emerging urban infrastructure for transportation. This course addresses such integration from technology, organizational, policy and business model perspectives.

Training / Education

DO-178C Practical Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). RTCA DO-178C  is the globally-accepted standard for civil aviation software development and certification. Compliance with the objectives of DO-178C is the primary means for meeting airworthiness requirements and obtaining approval of airborne software in TC/STC/TSO, etc. Even after study of the DO-178C, many people lack experience producing DO-178C compliant airborne software in real applications.

Training / Education

Fundamentals of Powertrain Design for Hybrid Electric Vehicles

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Driven by high fuel prices, environmental regulations, and consumer demand, the market for hybrid electric vehicles (HEV) has experienced rapid growth. Every major automotive company produces an HEV. There are approximately fifty different HEV models on the market and over eight million HEVs already sold. In order to meet current and future demands in the HEV and PHEV markets, success will depend on engineering personnel knowing how to develop and manufacture HEV powertrains.

Training / Education

Fundamentals of Fatigue Analysis

Fatigue is a structural failure mode that must be recognized and understood to develop products that meet life cycle durability requirements. In the age of lightweighting, fatigue strength is an important vehicle design requirement as engineers struggle to meet stringent weight constraints without adversely impacting durability. This technical concept course introduces the fatigue failure mode and analysis methods. It explains the physics of material fatigue, including damage accumulation that may progress to product failure over time, and it provides the needed foundation to develop effective fatigue prediction capabilities.

Training / Education

FAA/EASA Certification, Methods of Compliance for 29.865 External Loads

Certifying an aircraft, part or appliance can be challenge. The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.865 External loads to include hoists, belly-mounted external structure and cargo hook loads.

Training / Education

FAA/EASA Certification, Methods of Compliance for 29.801 Ditching

Certifying an aircraft, part or appliance can be a challenge.  The FAA/EASA procedures can be frustrating and a maze of rules, policy and guidance. Understanding the process and procedures can provide you with a competitive edge and reduce your time obtaining a Certification approval. This course provides an overview of the Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. This course has a focus on 29.801 Ditching and EASA 29.802 Emergency Flotation.

Training / Education

LIDAR and Infrared Cameras for ADAS and Autonomous Sensing

This course examines ADAS and autonomous vehicle technologies that offer the potential to increase safety while attempting to optimize the cost of car ownership. LIDAR (light detection ranging) and Infrared camera sensing are seeing a rapid growth and adoption in the industry. However, the sensor requirements and system architecture options continue to evolve almost every six months. This course will provide the foundation to build on for these two technologies in automotive applications. It will include a demonstration model for LIDAR and Infrared camera.

Training / Education

EV Motor Design Analysis and Test Verification

This course, designed for EV motor engineers and graduate participants, systematically introduces EV motor design analysis and test verification. Combined with engineering practice, it discusses typical EV motor design cases and practical issues related to EV motor technology, aiming to broaden the horizon of EV motor design engineers and improve their problem-solving skills.

Training / Education

Fundamentals and Applications of Electric Motors for Automotive Industries

As the electrification of automobiles is on the rise, it is imperative that the capabilities and limits of the associated devices and systems be understood at a higher level than previously considered adequate. For example, the Tesla Model S has 62 electric motors while the Model X has 70! They propel the vehicle and provide comfort too. Their design must reflect the worst case operating scenarios, duty cycles, environment, country of use and its standards, etc.

Training / Education

DO-178C Basic Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). This course is offered in Mandarin Chinese. The course materials are in English and Chinese. RTCA DO-178C is the accepted standard for civil aviation software development and certification, and Chinese civil aviation companies must comply with this standard to meet airworthiness requirements. Participants will attain a basic understanding of the concepts of DO-178C and how it is properly utilized.

Training / Education

Control Systems Simplified

This course introduces the highly mathematical field of control systems focusing on what the classical control system tools do and how they can be applied to automotive systems. Dynamic systems, time/frequency responses, and stability margins are presented in an easy to understand format. Utilizing Matlab and Simulink, participants will learn how simple computer models are generated. Other fundamental techniques in control design such as PID and lead-lag compensators will be presented as well as the basics of embedded control systems.

Training / Education

Power Electronics for Mechanical Engineers

This 4-hour short course provides an overview of Power Electronics (PE) in use in modern transport aircraft. This course includes the context, principles, design drivers, and the main PE components of various flight applications, including those for harsh environments. This course is designed to deliver and demystify the basic theories and best practices of mechanical, electronics, thermal management, safety, reliability and maintainability disciplines. In addition, future trends in Power Electronics will be discussed.

Training / Education

Aircraft Hydraulic Pumps and Motors - Application, Design and Integration

This 4-hour short course offers an overview of aircraft hydraulic pumps focusing on their application in hydraulic systems, design and performance characteristics, and integration issues. These topics will examine the various pump technologies available for aircraft system applications, their design, performance and operational characteristics and limitations, and discusses the challenges and lessons learned in the integration of pumps in hydraulic systems.

Training / Education

Automated Systems for Aerospace and Space Applications

Pressure on costs and budgets makes automating processes within the aerospace and space industries necessary. Misunderstandings about reductions to these complex systems can result in the improper application of these systems, often leading to poor outcomes and project failure. This course introduces the components of automation critical to the practice of acquiring, installing, and maintaining automation. The instructor presents the types, components, operation, application, cost benefits, laws, strengths, and limitations of automation.

Training / Education

Powertrain Product Development for Electrified Vehicles

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Transmission and driveline products for new energy vehicles are different in many aspects from their counterparts in traditional vehicles. Participants will have a chance to develop in-depth, practical, and hands-on knowledge regarding system configuration, key subsystems and components design, system control, testing, design verification, and so forth. Common problems such as reliability, durability, NVH as well as related technology trends will be addressed from an engineer's viewpoint.

Training / Education

Fundamentals of Automotive All-Wheel Drive Systems

This course provides an introduction to the fundamental concepts and evolution of passenger car and light truck 4x4/all-wheel drive (AWD) systems including the nomenclature utilized to describe these systems. Basic power transfer unit and transfer case design parameters, component application to system function, the future of AWD systems, and emerging technologies that may enable future systems are covered. This course is an excellent follow-up to the  98024-A Familiarization of Drivetrain Components course (which is designed for those who have limited experience with the total drivetrain).

Training / Education

Accelerated Test Methods for Ground and Aerospace Vehicle Development

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development.  Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater.