Search Results

Training / Education

Guidance for Model-Based Development and Verification (DO-331)

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Model-Based Development and Verification (MBDV) technology has been widely accepted in software production. When this technology is used in airborne software, key issues should be considered to ensure airworthiness and safety goals are met. To facilitate the use the MBDV technology, RTCA DO-331 is published as a supplement and guidance support to DO-178C. Because MBDV is regularly used in critical software applications, guidance is needed to apply it to airborne software.

Training / Education

Key Considerations for the Comparison of Power‐by‐Wire and Hydraulically Supplied Solutions for Aerospace Actuation

This four-hour short course provides key considerations for the comparison of electrically supplied (Power-by-Wire, or PbW) and hydraulically supplied (Power-by-Pipe, of PbP) actuation for aerospace. The focus is put on the consequence, for designers, of changing the physical principles and the technology used. A particular attention is paid to the unavoidable side effects introduced by the technological realization. Simple examples with realistic numerical values are used to make the comparisons quantitatively realistic.

Training / Education

Flight Control Actuation System Considerations on Architecture Design and System Installation

The purpose of this four hour short course is to provide information to understand how is established the basic architecture of a Flight Control Actuation System of a transport airplane, i.e. understanding the rationale for the distribution of the control surfaces, power sources, actuators and computers.

Training / Education

Electrohydraulic Servovalves in Flight Control and Utility Actuators

This four-hour short course intends to present an overview of electrohydraulic flow control servovalves commonly used in flight control and utility actuators. The scope of this course covers the history and design of servovalves, as well as their most common performance characteristics. This course will provide participants an understanding of the application of electrohydraulic servovalves in hydraulically powered actuators and preparation of the servovalve procurement specification.

Training / Education

Design Considerations for Electrohydrostatic Actuators

This course is verified by Probitas Authentication as meeting the AS9104/3A requirements for continuing Professional Development. This four-hour short course will provide an overview of design considerations for electrohydrostatic actuation for transport and business aircraft applications.  The instructor will present the critical topics of electrohydrostatic actuation (EHA) from a systems development perspective (V-Approach).  Beginning with aircraft system requirements, the instructors will then guide participants through EHA subsystem requirements, component design, component verification test, aircraft integration, and use. 

Training / Education

DO-178C Basic Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). This course is offered in Mandarin Chinese. The course materials are in English and Chinese. RTCA DO-178C is the accepted standard for civil aviation software development and certification, and Chinese civil aviation companies must comply with this standard to meet airworthiness requirements. Participants will attain a basic understanding of the concepts of DO-178C and how it is properly utilized.

Training / Education

Design Considerations for Electromechanical Flight Control Actuation Systems

This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical design of actuators themselves, with limited reference to their control electronics. Additionally, this course will provide participants an understanding of the design considerations behind these actuation systems.

Training / Education

Design Considerations for Hydraulically Powered Fly-By-Wire Flight Control Actuation Systems

This four-hour short course will present an overview of hydraulically powered flight control actuation systems used on fly-by-wire aircraft, covering both military and commercial applications. The scope this course covers the issues related to the mechanical design of actuators themselves, as well as their control electronics. Additionally, this course will provide participants an overview of the design considerations behind these flight control actuation systems.

Training / Education

DO-178C Practical Training

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). RTCA DO-178C  is the globally-accepted standard for civil aviation software development and certification. Compliance with the objectives of DO-178C is the primary means for meeting airworthiness requirements and obtaining approval of airborne software in TC/STC/TSO, etc. Even after study of the DO-178C, many people lack experience producing DO-178C compliant airborne software in real applications.

Training / Education

Guidance for Software Tool Qualification (DO-330)

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Software technology for airborne and ground-based operations has changed and software development teams frequently need guidance on tools for the development, verification, transformation, testing, modification and control of software programs. Developed in support of DO-178C or CO-278A, RTCA DO-330 explains the process and objectives for qualifying software tools and facilitates the compliance of airborne products.

Training / Education

Applying DO-254 for Avionics Hardware Development and Certification

2024-11-20

This basic course introduces the intent of the DO-254 standard for commercial avionics hardware development. The content will cover many aspects of avionic hardware including, aircraft safety, systems, hardware planning, requirements, design, implementation, and testing. Participants will learn industry-best practices for real-world hardware development, common DO-254 mistakes and how to prevent them, and how to minimize risks and costs while maximizing hardware quality.

Training / Education

Introduction to DO-178C

2024-11-18

This two-day course will introduce participants to industry best practices for real-world software development and how to avoid common DO-178C mistakes. This course is intended to present the information necessary to help minimize DO-178C risks and costs, while also maximizing software quality during avionics development.  The instructor will guide participants through topics such as aircraft safety, systems, software planning, software requirements, and software design/code/test.  

Training / Education

Photogrammetry and Analysis of Digital Media

2024-08-28

Photographs and video recordings of vehicle crashes and accident sites are more prevalent than ever, with dash mounted cameras, surveillance footage, and personal cell phones now ubiquitous. The information contained in these pictures and videos provide critical information to understanding how crashes occurred, and  analyze physical evidence. This course teaches the theory and techniques for getting the most out of digital media, including correctly processing raw video and photographs, correcting for lens distortion, and using photogrammetric techniques to convert the information in digital media to usable scaled three-dimensional data.

Training / Education

Development and Practice of Airborne Electronic Hardware Based on DO-254

2024-08-27

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Participants in this course comprehensive understanding of the DO-254 standard including how the development of airborne electronic hardware (AEH) and the development of the aircraft system are related. It addresses the key objectives, activities, and generated data of the AEH lifecycle and presents common problems in the application of DO-254 and how to prevent them. This course also includes current AEH certification requirements and interprets some of the difficulties in gaining compliance approval.

Training / Education

DO-326A and ED-202A An Introduction to the New and Mandatory Aviation Cyber-Security Essentials

2024-07-29

This course will introduce participants to industry best practices for real-world aviation cyber-security risk-assessment, development & assurance. Participants will learn the information necessary to help minimize DO-326/ED-202-set compliance risks and costs, while also optimizing cyber-security levels for the development, deployment and in-service phases Topics such as aircraft security aspects of safety, systems-approach to security, security planning, the airworthiness security process, and security effectiveness assurance will be covered.

Training / Education

Aircraft Cabin Safety and Interior Crashworthiness

2024-07-23

This two-day course will begin with a discussion of commercial off the shelf (COTS) test requirements.  The instructor will then guide participants through the various cabin interior emergency provisions and their requirements such as supplemental passenger oxygen, emergency equipment, seats, flammability, emergency exits, emergency lighting and escape path markings, and various other cabin interior systems.  

Training / Education

DO-178C Advanced Training

2024-06-12

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Participants deepen the understanding of the standard and build on how software engineers, inspectors, and DERs can comply with the standard's objectives. Practitioners engage with the implications and rationales of DO-178C in order to effectively tackle real worked applications.

Book

Honda R&D Technical Review April 2021

2021-04-01

Honda R&D Technical Review is a periodical containing research papers related to Honda R&D Center activities worldwide that cover automobile, motorcycle, power products, aircraft engine, and other fundamental technologies. Honda Motor offers a book for the April 2021 issue with 104 pages containing 12 papers focusing on the following latest topics: Technology for Prediction of Contactor Noise for Electric-powered Vehicle Batteries Reduction of Internal Resistance in High Capacity Lithium-ion Batteries with 3D Lattice-structured Electrode Predictive Technique for Seat Belt Submarining Injury by Triaxial Iliac Load Cell

Standard

CABIN CONNECTORS AND CABLES PART 2 SPECIFICATION OF CONNECTORS, CONTACTS, AND BACKSHELLS

2021-09-09

CURRENT

ARINC800P2-2

This specification describes the general connectors, contacts, and backshells in their shape and characteristic for cabin systems for commercial aircrafts. ARINC 600, ARINC 404, and ARINC 801 connector specifications are published as independent standards.

Standard

LOGICAL SOFTWARE PART PACKAGING FOR TRANSPORT

2020-11-16

CURRENT

ARINC641-1

The purpose of this standard is to provide a method for packaging aircraft software parts for distribution using contemporary media or by electronic distribution. This project intends to standardize and provide guidance for the storage of floppy based software, currently packaged in media set parts. This standard format can be then stored or distributed on a single physical media member (CD-ROM), or by electronic crate. The obsolescence of floppy disks drive an urgent need for this guidance.