Search Results

The ELPI particle size instrument measures the number of particles in 12 size ranges using a series of impaction stages. To convert the measurement of number to mass, the instrument assumes that all the particles are spheres and are of a constant density, defined by the user, but normally around 1000kg/m3. Both of these assumptions are incorrect for all size ranges and the resultant mass emissions for PM10 usually do not agree with standard filter paper measurements. This paper presents a review of the current situation of the knowledge on converting particle number into mass, using the ELPI or other particle size instruments. Andersen Impactors were used for gravimetric determinations of the mass in the sizes above 400nm, in order to compare their resullts with ELPI number measurements. Gravimetric determination of mass using the ELPI was also attempted. The sampling time with both instruments was two hours to collect enough mass to weigh in each size range.

The accumulation and release of particulate matter within the exhaust system of a modern light-duty diesel engine was studied during a step cold start to three steady state load conditions, idle, 10 and 15kW. Changes in particulate mass concentration through the various components of the exhaust system were dependent on the previous short-term history of the engine operation, and on the engine speed reached during cold start. Particulate matter was deposited within the oxidation catalyst when cold and in the downstream exhaust silencer at idle and low power conditions. Particulate matter was released from the first silencer at all three test conditions and this release exceeded the deposition in the downstream silencer and resulted in a net exhaust system particulate blowout, at all three test conditions. This was a large fraction of the tailpipe emissions at all three test conditions.