Refine Your Search

Topic

Author

Affiliation

Search Results

Training / Education

Aircraft Virtual Flight Testing and Certification in Off-nominal Multifactorial Situations

The behavior of a 'pilot-automaton-aircraft-operating environment' system (the System) in off-nominal situations with multiple risks can be unpredictably dangerous. Most multifactorial flight scenarios (corner cases) are considered as theoretically improbable. Such anomalies do nonetheless occur in operations and can lead to inconceivable accidents - 'black swan' events.
Training / Education

Methodology of Interactive Design and Study Using Driving Simulator

2021-09-09
Driving simulator is a key component of automotive interactive design, which can provide objective data to support both the effectiveness of design and user experience. On the other hand, driving simulator and the design of its experiments are major challenges, as improper experiment design will lead to consequences such as failure in identifying designing errors of the interactive design itself.
Video

Can America Plug In?

2011-11-04
There are many macro drivers that are creating opportunities for transportation electrification. They include the environment, dependence on foreign oil, national security, battery technology and government incentives to name a few. In light of this growing momentum consumers will have choices to where they can charge ? at home, workplace or publicly. Electrical vehicle supply equipment will drive value throughout the supply chain ? installer, building owner, automaker, suppliers, utilities and consumers. Market acceptance will occur when consumer?s needs and wants are met. To meet these needs access to products through multiple channels will be required. Presenter Manoj Karwa, Leviton Manufacturing Co. Inc.
Video

Flexible Real-Time Simulation of Truck and Trailer Configurations

2011-12-05
Real-time simulation of truck and trailer combinations can be applied to hardware-in-the-loop (HIL) systems for developing and testing electronic control units (ECUs). The large number of configuration variations in vehicle and axle types requires the simulation model to be adjustable in a wide range. This paper presents a modular multibody approach for the vehicle dynamics simulation of single track configurations and truck-and-trailer combinations. The equations of motion are expressed by a new formula which is a combination of Jourdain's principle and the articulated body algorithm. With the proposed algorithm, a robust model is achieved that is numerically stable even at handling limits. Moreover, the presented approach is suitable for modular modeling and has been successfully implemented as a basis for various system definitions. As a result, only one simulation model is needed for a large variety of track and trailer types.
Video

Improvement in OBD Development Process for HEV's

2012-02-01
Hybrid technology has the potential to enable dramatic reductions in greenhouse gases (GHG), such as the California goal of reducing GHG by 80 percent from 1990 levels by 2050. As a result it is expected that hybrid systems will occupy a growing proportion of the market. However, introducing a hybrid system in a vehicle may adversely affect the performance of the engine OBD system in monitoring malfunctions impacting pollutant emissions. For example, a hybrid system that reduces time of the engine in idle or deceleration overrun conditions could make a well-performing engine OBD system noncompliant, by reducing in-use frequency of some OBD monitors below acceptable levels. In this presentation, Ricardo will present a process for evaluating the impact that a hybrid system which has been optimised to minimise GHG emission over a specified drive-cycle will have on the effectiveness of engine OBD monitors.
Video

A Method for Testing GPS in Obstructed Environments Where GPS/INS Reference Systems Can Be Ineffective

2011-11-17
When vehicles share certain information wirelessly via Dedicated Short Range Communications (DSRC), they enable a new layer of electronic vehicle safety that, when needed, can generate warnings to drivers and even initiate automatic preventive actions. Vehicle location and velocity provided by Global Navigation Systems (GNSS), including GPS, are key in allowing vehicle path estimation. GNSS is effective in accurately determining a vehicle's location coordinates in most driving environments, but its performance suffers from obstructions in dense urban environments. To combat this, augmentations to GNSS are being contemplated and tested. This testing has been typically done using a reference GNSS system complimented by expensive military-grade inertial sensors, which can still fail to provide adequate reference performance in certain environments.
Video

Advances of Virtual Testing and Hybrid Simulation in Automotive Performance and Durability Evaluation

2012-02-15
Virtual testing is a method that simulates lab testing using multi-body dynamic analysis software. The main advantages of this approach include that the design can be evaluated before a prototype is available and virtual testing results can be easily validated by subsequent physical testing. The disadvantage is that accurate specimen models are sometimes hard to obtain since nonlinear components such as tires, bushings, dampers, and engine mounts are hard to model. Therefore, virtual testing accuracy varies significantly. The typical virtual rigs include tire and spindle coupled test rigs for full vehicle tests and multi axis shaker tables for component tests. Hybrid simulation combines physical and virtual components, inputs and constraints to create a composite simulation system. Hybrid simulation enables the hard to model components to be tested in the lab.
Video

Market Analysis Mini-e

2011-11-21
We report here results from first year of the BMW MINI E deployment. BMW deployed 450 MINI E?s to North America. Nearly 50% were leased by households in Los Angeles and the New York area. PH&EV Center researchers surveyed MINI E drivers throughout their year with the vehicles, focusing on the experiences of 50 households who volunteered for more detailed interviews. We report here their experiences with driving electric vehicles, adaptions to daily range limitations, and using electricity as a fuel. Presenter Thomas Turrentine, Univ. of California-Davis
Video

Eurocae WG-72 Activities

2012-03-16
The presentation provides an overview about the activities of Eurocae Working Group 72 (WG-72) starting with a brief synopsis of the context which suggested why such a committee should be established in 2006. It then goes into further detail about the drivers for the work of the committee, which call for the products to be delivered. It addresses some of the challenges with respect to its users. It points out that one of the lessons the committee learned was importance of the focus on the users, such that the products provide their maximum utility. Hence, the users should better be among the participants to achieve this objective. Other industries have dealt with the subject of Information System (or Cyber-Physical) Security long before this industry was forced to consider it. Consequently there are many industry standards and national or international norms, which may help to develop what is deemed needed for Civil Aviation.
Video

Safety Element out of Context - A Practical Approach

2012-05-22
ISO 26262 is the actual standard for Functional Safety of automotive E/E (Electric/Electronic) systems. One of the challenges in the application of the standard is the distribution of safety related activities among the participants in the supply chain. In this paper, the concept of a Safety Element out of Context (SEooC) development will be analyzed showing its current problematic aspects and difficulties in implementing such an approach in a concrete typical automotive development flow with different participants (e.g. from OEM, tier 1 to semiconductor supplier) in the supply chain. The discussed aspects focus on the functional safety requirements of generic hardware and software development across the supply chain where the final integration of the developed element is not known at design time and therefore an assumption based mechanism shall be used.
Video

Orbital Drilling Machine for One Way Assembly in Hard Materials

2012-03-23
In Aeronautic industry, when we launch a new industrialization for an aircraft sub assembly we always have the same questions in mind for drilling operations, especially when focusing on lean manufacturing. How can we avoid dismantling and deburring parts after drilling operation? Can a drilling centre perform all the tasks needed to deliver a hole ready to install final fastener? How can we decrease down-time of the drilling centre? Can a drilling centre be integrated in a pulse assembly line? How can we improve environmental efficiency of a drilling centre? It is based on these main drivers that AIRBUS has developed, with SPIE and SOS, a new generation of drilling centre dedicated for hard materials such as titanium, and high thicknesses. The first application was for the assembly of the primary structure of A350 engine pylons. The main solution that was implemented meeting several objectives was the development of orbital drilling technology in hard metal stacks.
Video

Spotlight on Design: Engine Development for Performance and Efficiency

2015-12-22
“Spotlight on Design” features video interviews and case studies, focusing on technology breakthroughs, hands-on testimonials, and the importance of fundamentals. Viewers are virtually taken to industry labs and research centers to learn how design engineers solve real-life problems. These challenges include enhancing product performance, reducing cost, improving quality and safety, while decreasing environmental impact, and achieving regulatory compliance. In the episode “Engine Development for Performance and Efficiency” (22:00), engineers from Ricardo and General Motors explain the importance of lessons learned on the race tracks, how using the appropriate design and simulation tools expedite development, and present the new testing frontiers now available with 3D printing.
Book

Green Technologies and Active Safety in the Mobility Industry

2011-09-12
This set includes two books, edited by Delphi's Chief Technology Officer Dr. Andrew Brown, Jr., which explore some of the most significant challenges currently facing the automotive industry-building green and safer vehicles. "Green Technologies and the Mobility Industry" and "Active Safety and the Mobility Industry" each include 20 SAE technical papers on their respective topics, originally published from 2009 through 2011. Green Technologies and the Mobility Industry Covers a wide range of subjects showcasing how the industry is developing greener products and keeping up with-if not staying ahead of-new standards and regulations. Active Safety and the Mobility Industry Details the latest innovations and trends in active safety technology and driver distraction prevention techniques. Buy a Combination of Books and Save!
Book

The Carroll Smith Race Car Set

1996-08-01
This series of books have become the worldwide "bibles" of race car tuning and preparation. This set includes: Prepare to Win,Drive to Win,Tune to Win, Engineer to Win and Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook.
Technical Paper

Automobile Bodies, from the Abstract Customer's Viewpoint

1928-01-01
280057
CONSTRUCTIVE criticism of automobile bodies as now built is given herein, based on experience gained in driving five-passenger sedan cars of many makes a total distance of nearly 10,000,000 miles in one year in tests at the General Motors Proving Ground. The fault finding, although humorously exaggerated, will be valuable if taken seriously, as it gives to all body designers and builders the benefit of testing experience that few companies are in a position to gain at first hand. The author treats his subject from the viewpoint of the abstract customer; that is, the automobile-purchasing public as a whole and as represened by the imaginary average man, who is assumed to have average stature and body structure and to drive all the different makes of car. Thus he is assumed to change from one to another make frequently, instead of becoming used to only one or two cars.
Technical Paper

Long-Haul Passenger Transportation

1929-01-01
290084
THE creation of additional operating divisions and maintenance units, based on the California Transit Co. system originally operated by the author, which had proved successful in long-haul passenger transportation on the Pacific Coast, expanded the business so that the Yelloway Pioneer Stages, Inc., now includes about 9000 miles of route. The design of the equipment for the service was developed to meet the severe operating conditions, which demand that the same vehicle run satisfactorily over a sea-level desert and through mountainous country having an average altitude of more than 5000 ft. and, at the same time, that safety and comfort be provided for the passengers. This requires factors of strength and safety that are greatly in excess of those possessed by the ordinary commercial motorcoach.
Technical Paper

Long-Distance Passenger Services

1929-01-01
290083
EXTENSION of motorcoach services over routes of 100 miles or more in length in all parts of the Country is shown by a map, and figures are given of the number of routes, the miles of highway over which the services are operated, running time, rates of fare charged and like data. Facilities and operating methods differentiating long-distance from suburban services are mentioned and the similarity to railroad practice pointed out. A characteristic of routes ranging from several hundred to nearly 1500 miles is that service is afforded continuously for 24 hr. per day seven days per week and many passengers ride day and night. Such long runs are broken into stages so that a driver does not work more than 8 to 10 hr. as a rule and vehicles are changed at the end of a run of a certain distance, which may vary from about 200 to nearly 750 miles.
Technical Paper

Bodily Steadiness-A Riding-Comfort Index

1930-01-01
300003
This is the fourth report by Dr. Moss on the investigation of riding comfort at the George Washington University and is a progress report on the measurement of automobile riding-qualities. The previous reports were published in the S.A.E. JOURNAL as follows: September, 1929, p. 298; January, 1930, p. 99; and April, 1930, p. 513. In this report, which was presented at the 1930 Semi-Annual Meeting, the author describes improvements made in two wabblemeters for measuring physiological fatigue caused by riding and the use of two accelerometers to correlate the behavior of the automobile with the physiological results. Results obtained with two groups of subjects, one consisting of taxicab drivers and the other of university students, are summarized, and the results of preliminary tests of the comparative riding-qualities of different cars as shown by their effects on the subjects are also given.
Technical Paper

Measurement of Comfort in Automobile Riding

1930-01-01
300002
EXPERIMENTS that have been in progress since the 1929 Semi-Annual Meeting to measure the fatigue caused by an automobile ride, using the human body as a measuring instrument, and to predict there-from the possible effects of various types of spring-suspension, shock-absorber and other comfort-giving components are described. Initially, the problem was approached from the physiological standpoint because fatigue is definitely known to be a physiological phenomenon and, if the physiological changes are sufficiently marked to be measured, physiological tests are definite and quantitative. Changes in the human body are a good index of relative comfort, and, if the normal reactions of an individual or any group of individuals before a test are known, similar measurements at the end of a test or at the end of an automobile ride should show an appreciable difference.
X