Search Results

This study investigates challenges associated with integrating a passenger (PAX) door on complex compound curvature (CCC) fuselages. Aerospace companies are investigating concepts that no-longer have constant cross-section (CS) fuselages. The PAX door is based on a generic semi-plug door for a long range business jet (BJ). This study investigates limitations of locating the door by varying the transition zone angle. A parametric CATIA tool, coupled with the use of finite element model (FEM) results can highlight key drivers in the design and location of PAX doors, creating a first-draft structural layout. The associated impact on the design and structural architecture for a fold down PAX door with integrated stairs is discussed. The impact of CCCs on the PAX door design is investigated with consideration to location, kinematics and function of the door.

Statistical process control (SPC) has been extensively used in many different industries including automotive, electronics, and aerospace, among others. SPC tools such as control charts, process capability analysis, sampling inspection, etc., have definitive and powerful impact on quality control and improvement for mass production and similar production systems. In aerospace manufacturing, however, applications of SPC tools are more challenging, especially when these tools are implemented in processes producing products of large sizes with slower production rates. For instance, following a widely accepted rule-of-thumb, about 100 units of products are required in the first phase of implementing a Shewhart type control chart. Once established, it then can be used for process control in the second phase for actual production process monitoring and control.

The objective of this document is to present the methodology used to verify the structural integrity of a redesigned composite part. While shifting the manufacturing process of a composite part from pre-impregnated to a liquid resin injection process, the Composites Development team at Bombardier Aerospace had to redesign the component to a new set of design allowables. The Integrated Product Development Team (IPDT) was able to quickly provide a turnkey solution that assessed three aspects of airframe engineering: Design, Materials & Processes (M&P) and Stress. The focus of this paper will be the stress substantiation process led by the Stress Engineers. It will also bring up the synergies with M&P that are unique to the IPDT approach. The stress substantiation process required three distinct checks be confirmed.

The hydraulic actuators are used to power flight control surfaces of the aircraft and to ensure surface movement. A system of two or three actuators is usually designed depending on the surface and intuitively these actuators are considered as a redundant architecture from a reliability and functionality point of view. The proper reliability modeling of the system of actuators must consider the system's functionality and design constraints for the remaining available actuator hinge-moment in the event of a partial or total actuator failure. As a result, this will affect the reliability assessment of that design. Furthermore, this system of actuators is also designed to provide a second function involving an assurance of the surface stiffness and damping. Generally, this second function does not require necessarily the same number of available actuators in order to be fully provided.

The paper provides an approach to establish compliance with current regulatory standards applicable to lightning protection of the fuel tank structure for Non-Fault Tolerant Feature Failures (NFTFF) through a numerical probability assessment. The proposed procedure is using the criteria defined in the FAA Policy Guidance for fuel tank structural lightning protection and is aligned with the regulatory path described as petitioning for an exemption. Failure modes of structural components for which fault tolerance has been shown to be impractical need to be addressed and the overall likelihood of fuel vapour ignition due to these failure modes must be shown to be extremely improbable. In order to accomplish this, the quantitative assessment of the overall probability of fuel vapour ignition is performed, along with all relevant data to support the probabilities determined for the purpose of this analysis.

With the high design/performance requirements in modern aircrafts, the need for a flexible airframe structural modeling strategy during the different phases of the airframe development process becomes a paramount. Hybrid structural modeling is a technique that is used for aircraft structural representation in which several Finite Element Modeling concepts are employed to model different parts of the airframe. Among others, the Direct Matrix Input at a Grid-Point (DMIG) approach has shown superiority in developing high fidelity, yet, simplified Finite Element Models (FEM's). While the deformation approach is a common choice for loads recovery in structures represented by stick models, using structural models simulated by the DMIG representation requires the adoption of a different approach for loads recovery applications, namely, the momentum approach.

During the course of an aircraft program, cost and weight savings are two major areas demanding constant improvements. An Integrated Product Development Team (IPDT) was set to the task of proposing potential improvements to an aircraft under development. From a list of potential parts, the IPDT selected one which was considered as the most suitable to leverage a co-curing process. In the aircraft manufacturing industry, any major modification to a part design should follow the program's means of compliance to certification. Furthermore, to demonstrate the new design's safety, sizing methodology and all supplementary testing must fit in the certification strategy. The IPDT approach was used to ensure the maturity of both process and part. Indeed, a mature turnkey solution can be implemented quickly on the shop floor. This IPDT approach is detailed in another SAE 2013 technical paper entitled: “A Novel Approach for Technology Development: A Success Story” [3].

Lessons learned from analysis of in-service icing incidents are described. The airfoil and wing design factors that define an aircraft's natural stall characteristics are explored, including the aerodynamic effects of contamination. Special attention is given to contamination in the form of “roughness” along wing leading edges typical of frost. In addition, the key aerodynamic effects of ground proximity and sideslip/crosswind during the take-off rotation are described. An empirical method, that can be used to predict a wing's sensitivity to wing leading edge roughness, is demonstrated. The paper explores the in-service differences of aircraft that incorporate “hard”, “supercritical” and “slatted” wings. The paper attempts to explain why the statistical evidence appears to favor the slatted wing for winter operations.

The Safety Management System (SMS) provides an environment where undesired events (proactively or reactively identified) are evaluated for the effect on safety using Risk Analysis. When the risk is evaluated, an interim risk reduction (mitigating action) may be applied to reduce the risk to a level that allows operations for a longer period before the safety issue is fully resolved. The risk assessment provides a means of evaluating the risk level and it may be difficult to quantify the “benefit” of interim mitigations that will reduce the risk. Prioritization of issues in the same risk category of the Risk Matrix is often simplified to a schedule and logistics basis of the final corrective action and often does not adequately show the benefit of the interim mitigating actions taken.

Aircraft systems are designed with reliability, safety and cost effectiveness in mind. The certification of the aircraft is based on tests and results of theoretical analyses that show the compliance with the FAR/JAR requirements. Monitoring for safety for in-service aircraft is an important, critical and extremely complex process. The ultimate objective is to assure that the safety level is equal to the original estimate or better. The manufacturer of the aircraft is particularly responsible for overall monitoring and assessment of all safety related events and corrective actions. Many different philosophies were adopted for this purpose. The safety monitoring and audit strategy is generally based on experience, engineering judgment, event analysis and numerical quantification by using probability theory and statistical tools. The aircraft sequential entry in the service and the aging of their components lead to the non-homogeneity of the fleet.

Nowadays, optimization of manufacturing and assembly operations requires taking into account the inherent processes variations. Geometric and dimensional metrology of mechanical parts is very crucial for the aerospace industry and contributes greatly to its. In a free-state condition, non-rigid parts (or compliant parts) may have a significant different shape than their nominal geometry (CAD model) due to gravity loads and residual stress. Typically, the quality control of such parts requires a special approach where expensive and specialized fixtures are needed to constrain dedicated and follow the component during the inspection. Inspecting these parts without jig will have significant economic impacts for aerospace industries, reducing delays and the cost of product quality inspection. The Iterative Displacement Inspection (IDI) algorithm has been developed to deal with this problem.

Aerospace panels are commonly restrained on complex inspection fixture jigs during the measurement process. Forces used to restrain the part are also monitored because of the part functional requirements. Given the difficulties in measuring these types of parts, this paper reviews the available fixtureless inspection methods with a focus on the challenges of their implementation and their aptitude to be used to estimate the part profile and the necessary restraining forces of an aerospace panel. To perform this investigation, finite element analysis is used to predict the constrained shape of four (4) simulated free state aerospace panel, with two different type of boundary condition, in five scenarios. From those analyses, the importance and limits of current finite element boundary setting method embedded in fixtureless inspection methods for nonrigid parts are highlighted.

This paper summarizes the techniques used during a microphone array test campaign performed at Pierre-Elliott-Trudeau Airport in Montréal, Québec (Canada) during the summer of 2012. Emphasis is put on the actual measurement campaign as only a limited amount of analysis has been performed at this stage. An aircraft position tracking tool is presented along with the beamforming algorithms that were used. Over 500 aircraft were recorded during this test. A comparison of known tonal sources associated to a specific aircraft type is made between different airlines in order to evaluate the repeatability of the method.